2014 HONDA CIVIC SEDAN Navigation Manual (in English)

40
uu Routing u Unverified Routing
System Setup
Unverified Routing
1 Unverified Routing
Unverified roads are found in rural areas, and
typically include residentia l streets away from the
center of a town. They ma y not be accurate, and can
contain errors in locati on, naming, and address
range.
Unverified roads are shown only when viewing the
map in the 2 mile (3 km) or less map scales.
Straight line guide
Pink route line
H HOME u Settings u Navigation u Routing u Unverified Routing
Receive turn-by-turn ma
p and voice guidance in unverified areas.
Select On or Off .
DifferencesOffOn (factory default)
On or Off ?The driver wishes to manually
navigate using the navigation
map and choose the streets that
lead to the destination.The driver chooses to let the
navigation system suggest possible
routing, knowing that the
guidance may not be accurate.
Route
c
alculation Route is usually longer, using
ver
ified roads whenever
possible.Route is shorter, but uses
unverified (purple) streets that
may not be accurate.
Route lineThe route line uses verified
streets only (when possible).
If Stra
ight Line Guide is set to
On , a pink vector line is
displayed on map that
continually points to your
destination.
2 Straight Line Guide P. 55
A pink route line highlights
suggested unverified streets on
the map while traveling to your
destination.
14 CIVIC 2D 4D IMA NAVI-31TR38200.book 40 ページ ２０１４年３月２１日　金曜日　 午後３時２０分

41
uu Routing u Unverified Routing
System SetupCautionary
messagesCautionary pop-up screens and
voice announcements remind
you to obey all traffic
restrictions when starting route
guidance, approaching an
unverified area, and entering an
unverified street.Cautionary pop-up screens and
voice announcements remind you
to exercise additional caution and
obey all traffic restrictions when
entering an unverified street.
Guidance
(map/voice)There is no turn-by-turn map or
voice guidance.Voice guidance commands end
with the phrase “if possible” to
remind you to verify all traffic
restrictions.
Directions listA direction list is typically not
available. However, depending
on your route, directions are
provided to help you reach the
first available verified road.A direction list is provided
showing unverified street names
and turn symbols in pink.
DifferencesOff On (factory default)
14 CIVIC 2D 4D IMA NAVI-31TR38200.book 41 ページ ２０１４年３月２１日　金曜日　午後３時２０分

42
uu Routing u Traffic Rerouting
System Setup
Traffic Rerouting
1 Traffic Rerouting
This feature is availabl e on U.S. models only.
You must be in or near a traffic-enabled city to
receive coverage for that area. Traffic information is
available in the lower 48 states and Hawaii.
Automatic traffic rerouting may not provide a detour
route depending on circumstances.H HOME u Settings u Navigation u Routing u Traffic Rerouting
A faster route can be calculated based on continuously updated
traffic information.
2Traffic ReroutingTM P. 109
Select an option.
The following options are available:
• On : The
system reroutes automatica lly based on traffic information.
• Off
(factory default): Disables the feature.
14 CIVIC 2D 4D IMA NAVI-31TR38200.book 42 ページ ２０１４年３月２１日　金曜日　 午後３時２０分

43
uu Routing u Edit POI Search Radius Along Route
System Setup
Edit POI Search Ra dius Along Route
1Edit POI Search Radius Along Route
The search distance does not affect the search range
used for the Find Nearest voice commands (e.g., say
“Find nearest gas station ”).HHOME u Settings u Navigation u Routing u Edit POI Search Radius
Al
ong Route
Select the distance from your highlighted ro u
te line (on either side of your route)
that the system will search for a waypoint.
2Adding Waypoints P. 112
You can specify a different search dist ance for freeways and surface streets.
1.Select an option.
2. Select a
search distance.
3.Select OK.
The following options are available:
• On Freeways : 1, 2
, 5, or 10 miles (1.6, 3, 8, or 16 km) can be set. Factory default
is 2 miles (3 km).
• On Surf
ace Streets : 1/2, 1, 2, or 5 miles (80 m, 1.6, 3, or 8 km) can be set.
Factory default is 1/2 mile (80 m).
14 CIVIC 2D 4D IMA NAVI-31TR38200.book 43 ページ ２０１４年３月２１日　金曜日　 午後３時２０分

44
uu Routing u Avoided Area
System Setup
Avoided Area
1 Avoided Area
The maximum size of an “a void area” is 1/2 square
mile (800 m square).
If your selected area contains a freeway, you are
asked “Would you like to avoid the portion of
the freeway that runs through this area? ”
Selecting No allows you to use a route through an
avoid area on a freeway . The pop-up message
appears when you calculat e the route including the
area.
You can select areas to avoid, however you cannot
select roads or areas that you want the system to use
for routing.
You can enter up to 25 ch aracters for the name.HHOME u Settings u Navigation u Routing u Avoided Area
Specify up to five areas to av
oid (e.g., road construction, closures), if possible, when
the system calculates routes to your destination.
1. Select New Area or an existing
area to edit.
2. Select Name to label the area to
avoid.
3. Enter a
name or title. Select OK.
4. Select Ar
ea to define the area to
avoid.
The following items are availa ble
(after an area is set):
• View Area : Displays
the selected avoid area on the map.
• De
lete: Deletes the selected avoid area.
14 CIVIC 2D 4D IMA NAVI-31TR38200.book 44 ページ ２０１４年３月２１日　金曜日　 午後３時２０分

1Avoided Area
The map scale can be change d at 1/4 mile (400 m) or
less.
45
uu Routing u Avoided Area
System Setup
5. Select a method fo r specifying the
area.
The following items are available:
• Addr
ess : Specify the general area by entering an address.
2Address P. 82
•Map Input : Specify the general area by map input.
2Map Input P. 96
Avoid area
6. If you select Map Input, scroll the
map to position the cursor over
your desired area, adjusting the
map scale as necessary. Select OK.
u To redo the
area selection,
select BACK.
7. Select or
to change the
size of the area you want to avoid.
Select OK.
8. Select OK.
u The ar
ea you specify is
displayed in the list of areas to
avoid.
14 CIVIC 2D 4D IMA NAVI-31TR38200.book 45 ページ ２０１４年３月２１日　金曜日　 午後３時２０分

46
System Setup
Guidance
HHOME u Settings u Navigation u Guidance
Choose various settings that determine th e
navigation system functionality during
route guidance.
Select an item.
The following items are available:
• Guidance
Mode: Sets whether to display only the map screen or a split
map/guidance screen.
2Guidance Mode P. 47
•Enhanced Voice Guidance : Sets whether to read out the street names during
voice guidance.
On : Voice guidance
includes the street names.
Off
(factory default): Disables the feature.
14 CIVIC 2D 4D IMA NAVI-31TR38200.book 46 ページ ２０１４年３月２１日　金曜日　 午後３時２０分

47
uu Guidance u Guidance Mode
Continued
System Setup
Guidance Mode
H HOME u Settings u Navigation u Guidance u Guidance Mode1 Guidance Mode
The guidance mode can also be selected from the
map menu, or selecti ng the orientation icon.
2 Map Menu P. 105
You can also change the ma p orientation (north-up,
heading-up, or 3D). 2 View (Map Orientation) P. 54
Select the display mode for the map and guidance screens.
12 3
1.
Select an option.
2. Select OK.
The following items are available:
• 1 (Map)
(factory default): Displays only the map screen. When you approach a
guidance point, the next guidance point appears.
Near the next
guidance point
Map screen Next Maneuver screen
Next guidance point
14 CIVIC 2D 4D IMA NAVI-31TR38200.book 47 ページ ２０１４年３月２１日　金曜日　 午後３時２０分