2011 TOYOTA AURIS Owners Manual (in English)

409 4-3. Do-it-yourself maintenance
4
Maintenance and care
UK_AURIS_HV_EE
26 ECU-ACC 7.5 AOutside rear view mirrors, audio
system, navigation system
27 CIG 15 A Cigarette lighter, power outlet
FuseAmpereCircuit

410 4-3. Do-it-yourself maintenance
UK_AURIS_HV_EE
After a fuse is replaced
If the lights do not turn on even after the fuse has been replaced, a bulb
may need replacement. (P. 411)
If the replaced fuse blows again, have the vehicle inspected by any
authorized Toyota dealer or repairer, or another duly qualified and
equipped professional.
If there is an overload in the circuits
The fuses are designed to blow, protecting the wiring harness from damage.
When replacing light bulbs
Toyota recommends that you use genuine Toyota products.
Because certain bulbs are connected to circuits designed to prevent over-
load, non-genuine parts may be unusable.
CAUTION
To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failing to do so may cause damage, and possibly a fire or injury.
Never use a fuse of a higher amperage rating than indicated, or use any
other object in place of a fuse.
Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
This can cause extensive damage or even a fire.
Do not modify the fuse or the fuse box.
NOTICE
Before replacing fuses
Have the cause of electrical overload determined and repaired by any autho-
rized Toyota dealer or repairer, or another duly qualified and equipped pro-
fessional, as soon as possible.

411
4-3. Do-it-yourself maintenance
4
Maintenance and care
UK_AURIS_HV_EE
Light bulbs
You may replace the following bulbs yourself. The difficulty level of
replacement varies depending on the bulb. If necessary bulb
replacement seems difficult to perform, contact any authorized
Toyota dealer or repairer, or another duly qualified and equipped
professional.
For more information about replacing other light bulbs, contact any
authorized Toyota dealer or repairer, or another duly qualified and
equipped professional.
Prepare a replacement light bulb.
Check the wattage of the light bulb being replaced. (P. 501)
Front bulb locations
Headlight low beam
(halogen bulb)
Front position light
Front fog light
Headlight
high beam
Front turn signal light

412 4-3. Do-it-yourself maintenance
UK_AURIS_HV_EE
Replacing light bulbs
Headlight low beams (halogen bulbs)
Turn the bulb base counterclock-
wise.
Unplug the connector while
depressing the lock release.
Rear bulb locations
Rear fog light Back-up light
Stop light
Tail light
License plate light
Rear turn signal light
STEP1
STEP2

413 4-3. Do-it-yourself maintenance
4
Maintenance and care
UK_AURIS_HV_EEHeadlight high beams
Turn the bulb base counterclock-
wise.
Unplug the connector while
depressing the lock release.
STEP1
STEP2

414 4-3. Do-it-yourself maintenance
UK_AURIS_HV_EEFront fog lights
Remove the fender liner bolts
and clip.
Remove the fender liner.
Unplug the connector while
depressing the lock release.
STEP1
STEP2
STEP3

415 4-3. Do-it-yourself maintenance
4
Maintenance and care
UK_AURIS_HV_EETurn the bulb base counterclock-
wise.
Front position lights
Turn the bulb base counterclock-
wise.
Remove the light bulb.
STEP4
STEP1
STEP2

416 4-3. Do-it-yourself maintenance
UK_AURIS_HV_EEFront turn signal lights
Turn the bulb base counterclock-
wise.
Remove the light bulb.
STEP1
STEP2