2008 TOYOTA FJ CRUISER Owners Manual

196 3−2. Using the audio system
Turn to select the desired channel in the all categories
or press “ ” or “” on to select the desired channel in
the current category.
 Setting XM
® Satellite Radio channel presets
Select the desired channel. Press and hold the button (from
to ) that the channel is to be set to until you hear a beep.

Changing the channel category
Press “
” or “ ” on the .
 Scanning XM
® Satellite Radio channels

Scanning channels in the current category
Press .
When the desired channel is reached, press
again.

Scanning preset channels
Press and hold until you hear a beep.
When the desired channel is reached, press
again.

Displaying text information
Press .
The display will show up to 10 characters.
The display changes as follows each time the button is pressed.
 CH NAME
TITLE (SONG/PROGRAM TITLE)

NAME (ARTIST NAME/FEATURE)

CH NUMBER

197
3−2. Using the audio system
3
Interior features
 When the battery is disconnected
Stations presets are erased.
Reception sensitivity
Maintaining perfect radio reception at all times is difficult due to the con−
tinually changing position of the antenna, differences in signal strength
and surrounding objects, such as trains, transmitters, etc.
 The radio antenna is mounted on the right−side front fender. The antenna
can be removed from the base by turning it.

XM
® Satellite Radio
An XM
® Satellite Radio is a tuner designed exclusively to receive broadcasts
provided under a separate subscription. Availability is limited to the 48 con−
tiguous states and 10 Canadian provinces.

XM
® subscriptions
For detailed information about XM® Satellite Radio or to subscribe:
U.S.A.—
Visit on the web at www.xmradio.com
or call 1−800−967−2346.
Canada—
Visit on the web at www.xmradio.ca
or call 1−877−438−9677.
 Radio ID
You will need the radio ID when activating XM
® service or reporting a
problem. Select “CH000” using , and the receiver’s 8−character ID
number will appear.
 Satellite tuner
The tuner supports only Audio Services (Music and Talk) and the accom−
panying Text Information of XM
® Satellite Radio.

198 3−2. Using the audio system
 If the satellite radio does not operate normally
If a problem occurs with the XM
® tuner, a message will appear on the dis−
play. Refer to the table below to identify the problem, and take the suggested
corrective action.
ANTENNAThe XM
® antenna is not connected. Check
whether the XM® antenna cable is attached
securely.
There is a short−circuit in the antenna or the sur−
rounding antenna cable. See a Toyota certified
dealer.
UPDATINGYou have not subscribed to the XM
® Satellite
Radio. The radio is being updated with the latest
encryption code. Contact the XM
® Satellite Radio
for subscription information. When a contract is
canceled, you can choose the “CH000” and all
free−to−air channels.
The premium channel you selected is not autho−
rized. Wait for about 2 seconds until the radio
returns to the previous channel or “CH001”. If it
does not change automatically, select another
channel. If you want to listen to the premium chan−
nel, contact the XM
® Satellite Radio.
NO SIGNALThe XM
® signal is too weak at the current location.
Wait until your vehicle reaches a location with a
stronger signal.
LOADING
The unit is acquiring audio or program information.
Wait until the unit has received the information.
OFF AIR
The channel you selected is not broadcasting any
programming. Select another channel.
−−−−−
There is no song/program title or artist name/fea−
ture associated with the channel at that time. No
action needed.

199
3−2. Using the audio system
3
Interior features
Contact the XM® Listener Care Center at 1−800−967−2346 (U.S.A.) or
1−877−438−9677 (Canada).
 Certifications for the radio tuner
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. How−
ever, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by trying one or more of
the following:
 Reorienting or relocate the receiving antenna.
Increasing the separation between the equipment and receiver.
Connecting the equipment into an outlet on a circuit different from that to
which the receiver is connected.
 Consulting the dealer or an experienced radio/TV technician for help.
NOTICE
 To prevent damage, remove the antenna in the following cases.
 The antenna will touch the ceiling of a garage.

A cover will be put on the vehicle.
−−−
The channel you selected is no longer available.
Wait for about 2 seconds until the radio returns to
the previous channel or “CH001”. If it does not
change automatically, select another channel.

200
3−2. Using the audio system
Using the CD player
Type A
Type B
Random playback
Track selectionRepeat playPlayback
CD eject
Display text message
CD selection (with external
CD changer only)
Fast−forward
Search playback
Reverse
Vo l u m ePower
Vo l u m e
Random playbackTrack selection Repeat playPlaybackPower
CD eject
Display text message
CD selection
Search playback
Reverse
Fast−forward

201
3−2. Using the audio system
3
Interior features
Loading CDs
 Loading a CD (type A)
Insert a CD.

Loading a CD (type B)
Press .
“WAIT” is shown on the display.
Insert a CD when the indicator on the slot turns from amber to
green.
The display changes from “WAIT” to “LOAD”.
 Loading multiple CDs (type B only)
Press and hold until you hear a beep.
“WAIT” is shown on the display.
Insert a CD when the indicator on the slot turns from amber to
green.
The display changes from “WAIT” to “LOAD”.
The indicator on the slot turns to amber when the CD is inserted.
Insert the next CD when the indicator on the slot turns from
amber to green again.
Repeat the procedure for the remaining CDs.
To stop the operation, press .
Ejecting CDs
 Ejecting a CD (type A)
Press and remove the CD.

Ejecting a CD (type B)
To select the CD to be ejected, press
() or
().
The number of the CD selected is shown on the display.
Press and remove the CD.

202 3−2. Using the audio system
 Ejecting all the CDs (type B only)
Press and hold until you hear a beep, and then remove the
CDs.
Selecting and scanning a track
 Selecting a track
Press “
” to move up or “
” to move down using or
until the desired track number is displayed.

Scanning tracks
Press or .
The first 10 seconds of each track will be played.
Press the switch again when the desired track is reached.
Fastforwarding and reversing tracks
To fast−forward or reverse.
Type A: Press and hold ( ) or ( ).
Type B: Press and hold ( ) or ( ).
Selecting a CD (with CD changer only)
 Selecting the desired CD
Type A: Press () or (
).
Type B: Press (
) or (
).
 Selecting loaded CDs
Press and hold or until you hear a beep.
The first 10 seconds of the first track on each CD will be played.
Press the switch again when the desired CD is reached.

203
3−2. Using the audio system
3
Interior features
Repeat play
 Repeating a track
Press (RPT) or (RPT).

Repeating all of the tracks on a CD (with CD changer only)
Press and hold (RPT) or (RPT) until you hear a beep.
Random playback
 Current CD
Press (RAND) or (RAND).
Tracks are played in a random order until the button is pressed once
more.
 All CDs (with CD changer only)
Press and hold (RAND) or (RAND) until you hear a
beep.
Tracks on all loaded CDs are played in a random order until the button is
pressed once more.
Switching the display
Press or .
Each time the switch is pressed, the display changes in the order of Track
no./Elapsed time
CD title
Track name.