2008 MITSUBISHI GRANDIS Owner's Manual (in English)

For pleasant driving
5-31
5
1. NEWS
2. AFFAIRS (Current affairs)
3. INFO (Information)
4. SPORT
5. EDUCATE (Education)
6. DRAMA
7. CULTURE
8. SCIENCE
9. VARIED
10. POP M (Pop music)
11. ROCK M (Rock music)
12. EASY M (Easy music)
13. LIGHT M (Light classics)
14. CLASSICS
15. OTHER M (Other music)
16. WEATHER (Weather information)
17. FINANCE
18. CHILDREN
19. SOCIAL
20. RELIGION
21. PHONE IN
22. TRAVEL
23. LEISURE
24. JAZZ
25. COUNTRY
26. NATION M (National music)
27. OLDIES
28. FOLK M (Folk music)
29. DOCUMENTTo search for a broadcast of desired program type:
1. Press the PTY button (8).
2. Press the TUNE/SEEK button (5 or 6) for less than 1 sec-
ond at a time to select your desired PTY.
3. Two seconds after a desired PTY has been selected, the
radio will begin to search for a broadcast of your selected
PTY. During search, the selected PTY on the display
blinks and the radio will begin to search for a broadcast of
your selected PTY.
4. When the radio picks up a station with your desired PTY,
the display will show the name of the station.
BK-XP08E1ENUK.en-uk.book Page 31 Monday, August 13, 2007 2:20 PM

5-32 For pleasant driving
5
NOTE●If the TUNE/SEEK button (5 or 6) is pressed for more
than 1 second, the radio will try to find out another broad-
cast of the same program type as currently selected.
●If no station is found with your desired PTY, the display
will show “EMPTY” for about 5 seconds and the radio
will return to the previous station.How to enter PTYs in the memory
E00721400122
As many as 6 PTYs can be entered in the memory.
Follow the steps described below.
1. Press either the TUNE/SEEK button (5 or 6) to tune the
PTY to be entered in the memory.
2. Press one of the memory select buttons (3) for 2 seconds
or longer. The sound will be momentarily interrupted
while the PTY is being entered into the memory. The
number of the button corresponding to the entry into the
memory and the PTY are displayed.
3. The preset memory setting is retrieved by pressing the
button and then releasing it within about 2 seconds.
To change the language of PTY display
E00721500181
You can select your favourite language among English, French,
German, Swedish, Spanish and Italian.
1. Press the “MENU” button (A) to select the language of
PTY display mode.
Refer to “Function setup mode” on page 5-35.
2. Press the audio adjust button (B) to select a language.NOTE●After selecting a mode, you can leave the function setup
mode by taking either of the following steps:
• Press the “MENU” button for at least 2 seconds.
• Make no entry for 7 seconds.
BK-XP08E1ENUK.en-uk.book Page 32 Monday, August 13, 2007 2:20 PM

For pleasant driving
5-33
5
Traffic information
E00721600179
The radio will automatically tune in to traffic information
broadcasts while receiving FM broadcasts or playing compact
discs.
To select this function, follow the instructions below.
1. Press the TP button (7). The display will show “TP” (12).
If the RDS data can be read, the display will show “RDS”
(10). If not, the display will show “NO RDS” for about
5 seconds.
2. If the radio detects traffic information on either the station
currently selected or another station, the display will show
“TRAF INF” for 5 seconds followed by a 2-second indi-
cation of the frequency. Then, it will show the name of the
station broadcasting the traffic information to which you
will listen. The volume level is set separately for listening
to normal audio programs and for listening to traffic infor-
mation. The volume level will therefore change automati-
cally to that set when traffic information was last received.
When the traffic information broadcast is over, the radio
will return to the previously received program and to the
corresponding volume level.
3. Press the TP button (7) to return to the previous condition.NOTE●While “TP” is illuminated, the radio stops only at TP sta-
tions even if the TUNE/SEEK button (5 or 6) is pressed.
BK-XP08E1ENUK.en-uk.book Page 33 Monday, August 13, 2007 2:20 PM

5-34 For pleasant driving
5
TP (Traffic information Program) search function
E00721800012
The traffic information program standby function is turned on
(with the TP indicator (12) shown on the display) and after
about 45 seconds since the RDS indicator (10) turns off due to
weak signal or the tuning station is changed over from a TP
station to a station which does not broadcast traffic informa-
tion, the sound will beep 5 times and seeks out a TP station in
all frequencies automatically.
The TP search function can be turned ON and OFF.
Refer to “Function setup mode” on page 5-35.
BK-XP08E1ENUK.en-uk.book Page 34 Monday, August 13, 2007 2:20 PM

For pleasant driving
5-35
5
Emergency broadcasts
E00721700011
If an emergency broadcast is caught while receiving a FM
broadcast or playing back a compact disc with the ignition
switch in “ACC” or “ON” position, the display will show
“ALARM” and the emergency broadcast will interrupt the cur-
rent program. The volume level is set separately for listening to
normal audio programs and for listening to emergency broad-
casts. The volume level will therefore change automatically to
that set when an emergency broadcast or traffic information
broadcast was last received. When the emergency broadcast is
over, the radio will return to the previously received program
and to the corresponding volume level.
Function setup mode
E00722500175
It is possible to change the following functions:
●AF
●CT
●REG
●TP-S
●Language of PTY display
1. Press the “MENU” button to select the function setup
mode.
BK-XP08E1ENUK.en-uk.book Page 35 Monday, August 13, 2007 2:20 PM

5-36 For pleasant driving
5
2. Press the “MENU” button repeatedly to select the mode
you wish to change. The order is: AF → CT → REG →
TP-S → PH → MUTE → Language of PTY display →
Function setup mode OFF.
NOTE●Although “PH” and “MUTE” appear on the display, the
PH and MUTE functions are inoperative.
BK-XP08E1ENUK.en-uk.book Page 36 Monday, August 13, 2007 2:20 PM

For pleasant driving
5-37
5
3. Select the desired setting for each mode to be turned ON
and OFF as shown below.
The setting will be shown on the display.NOTE●After selecting a mode, you can leave the function setup
mode by taking either of the following steps:
• Press the “MENU” button for at least 2 seconds.
• Make no entry for 7 seconds.
●For instructions on setting the language of PTY display,
refer to “To change the language of PTY display” on page
5-32.Example
BK-XP08E1ENUK.en-uk.book Page 37 Monday, August 13, 2007 2:20 PM

5-38 For pleasant driving
5
CD control panel and display
E00709500673
* Operates when equipped with a CD autochanger.
1- CD eject button
2- FOLDER (Folder down) button
3- FOLDER (Folder up) button
4- Disc loading slot
5- TRACK (Track down/up) button
6- SCAN button
7- AM/FM (FM/MW/LW selection) button
8- CD (CD mode changeover) button
9- TEXT (Title display) button
10- DISC (Disc down) button*
11- PAGE (Title scroll) button
12- DISC (Disc up) button*
13- PWR (On-Off) switch
14- RPT/RDM (Repeat/Random) button
15- CD indicator16- DISC indicator*
17- FOLDER indicator
18- TRACK indicator
19- NAME indicator
20- SCAN indicator
21- RPT (Repeat) indicator
22- MP3 indicator
23- Track play time display
24- RDM (Random) indicator
BK-XP08E1ENUK.en-uk.book Page 38 Monday, August 13, 2007 2:20 PM