2008 MITSUBISHI GRANDIS high beam

Overview
Exterior
E00100502128
Sunroof* p. 1-20
Side turn-signal lamps
p. 3-37, 8-44 Fuel tank filler p. 3
Outside rear-view mirrors
p. 4-10 Antenna p. 5-52
Front fog lamps
p. 3-39, 8-44, 8-52
Front turn-signal lamps
p. 3-37, 8-44, 8-51Bonnet p. 8-4 Windscreen wipers p. 3-41
Headlamps, high beam
p. 3-32, 8-44, 8-45Position lamps
p. 3-32, 8-44, 8-51 Headlamps, low beam
p. 3-32, 8-44, 8-45
BK-XP08E1ENUK.en-uk.book Page 10 Monday, August 13, 2007 2:20 PM

3-8 Instruments and controls
3Indicator and warning lamps
E00501501337
1- CRUISE indication lamp* → p. 4-46
2- ASC indication lamp* → p. 4-43
3- Turn-signal indication lamps/Hazard warning indication
lamps → p. 3-9
4- Rear fog lamp indication lamp → p. 3-9
5- Front fog lamp indication lamp → p. 3-9
6- High-beam indication lamp → p. 3-9
7- Diesel particulate filter (DPF) warning lamp (diesel-
powered vehicles)* → p. 4-21
8- Position lamp indication lamp → p. 3-9
9- Automatic headlamp levelling warning lamp* → p. 3-35
10- Diesel preheat indication lamp (diesel-powered vehicles)
→ p. 3-9
11- Charge warning lamp → p. 3-13
12- Oil pressure warning lamp → p. 3-1413- Check engine warning lamp → p. 3-11
14- TCL OFF indication lamp* → p. 4-43
15- SONAR OFF indication lamp* → p. 4-57
16- Anti-lock brake system (ABS) warning lamp → p. 4-38
17- Brake warning lamp → p. 3-10
18- Seat belt reminder/warning lamp → p. 2-35
19- Sports mode indication lamp (vehicles with A/T) → p. 4-32
20- Selector lever position indication lamps
(vehicles with A/T, “N” indication lamp is used also as A/T
warning lamp) → p. 4-28
21- Supplemental restraint system (SRS) warning lamp
→ p. 2-76
22- Door-ajar warning lamp → p. 3-14
23- Low fuel warning lamp → p. 3-6
BK-XP08E1ENUK.en-uk.book Page 8 Monday, August 13, 2007 2:20 PM

Instruments and controls
3-9
3 Indicator lamps
E00501600012
Turn-signal indication lamps/Hazard
warning indication lamps
E00501700169
These indication lamps blink on and off when a
turn-signal lamp is operating.NOTE●If the blinking is too fast, the cause may be
a faulty turn-signal connection or a blown
lamp bulb.
When the hazard warning lamp switch is
pressed, all turn-signal lamps will flash on and
off continuously.High-beam indication lamp
E00501800160
This indication lamp illuminates when the high
beam is used.Front fog lamp indication lamp
E00501900321
This lamp illuminates while the front fog lamps
are on.
Rear fog lamp indication lamp
E00502000101
This lamp illuminates while the rear fog lamp is
on.Position lamp indication lamp
E00508900102
This lamp illuminates with the lamp switch at
“ ” or “ ” positionDiesel preheat indication lamp
(diesel-powered vehicles)
E00502300061
This indication lamp illuminates when the igni-
tion switch is placed in the “ON” position. As
the glow plug becomes hot, the lamp goes out
and the engine can be started. If it does not go off
after a few seconds, we recommend you to have
the vehicle checked.NOTE●If the engine is cold, the diesel preheat indi-
cation lamp is on for a longer time.
●When the engine has not been started within
about 5 seconds after the diesel preheat
indication lamp went out, return the ignition
switch to the “LOCK” position. Then, turn
the switch to the “ON” position to preheat
the engine again.
BK-XP08E1ENUK.en-uk.book Page 9 Monday, August 13, 2007 2:20 PM

3-34 Instruments and controls
3
Dipper (High/Low beam change)
E00506200114
When the lamp switch is in the “ ” position, the beam
changes from high to low (or low to high) each time the lever is
pulled to (1). While the high beam is on, the high beam indica-
tor lamp in the instrument cluster will also illuminate.
Headlamp flasher
E00506300027
The high beams flash when the lever is pulled slightly to (2),
and will go off when it is released.
When the high beam is on, the high beam indicator lamp in the
instrument cluster will also illuminate.NOTE●The high beams can also flash when the lamp switch is
OFF.
●If you turn the lamps off with the headlamps set to high-
beam illumination, the headlamps are automatically
returned to their low-beam setting when the lamp switch
is next turned to the “ ” position.
BK-XP08E1ENUK.en-uk.book Page 34 Monday, August 13, 2007 2:20 PM

Maintenance
8-39
8
*1: Petrol-powered vehicles
*2: Diesel-powered vehicles
*3: Halogen lamp : 55 W (H1)
*4: Discharge lamp : 35 W (D2R)
Engine compartment fuse location
(diesel-powered vehicles only)
13Alternator
7.5 A*
1
Starter
25 A*
2
14 Hazard warning flasher 10 A
15Automatic transmission
20 A*
1
——
-*
2
16 Headlamp high beam (right) 10 A
17 Headlamp high beam (left) 10 A
18 Headlamp low beam (right)10 A*
3
20 A*
4
19 Headlamp low beam (left)10 A*
3
20 A*
4
20 Tail lamp (right) 7.5 A
21 Tail lamp (left) 7.5 A
22 Back up 15 A
23 Radio 10 A
24 Fuel pump 15 A
25 Electric tailgate 30 A No.
Symbol
Electrical system
Capacity
Engine compartment fuse location
Front
BK-XP08E1ENUK.en-uk.book Page 39 Monday, August 13, 2007 2:20 PM

8-44 Maintenance
8
Bulb capacity
E01003200043
When replacing a bulb, use a new bulb with the same wattage
and colour.Outside
E01003301487
Codes in parentheses indicate bulb types.Codes in parentheses indicate bulb types.
NOTE●The side turn-signal lamps, stop and tail lamps and high-
mounted stop lamp use LEDs rather than bulbs. For repair
and replacement, we recommend you to consult a special-
ist.
1- Front turn-signal lamps: 21 W (W21W)
2- Headlamps, high beam: 65 W (H9)
3- Front fog lamps: 51 W (HB4)
4- Headlamps, low beam
Halogen lamp: 55 W (H1)
Discharge lamp: 35 W (D2R)
5- Position lamps: 5 W (W5W)
6- Side turn-signal lamps
7- High-mounted stop lamp
8- Stop and tail lamps
9- Rear fog lamp (LHD vehicles): 21 W (W21W)
Reversing lamp (RHD vehicles): 21 W (W21W)
10- Licence plate lamps: 5 W (W5W)
11- Reversing lamp (LHD vehicles): 21 W (W21W)
Rear fog lamp (RHD vehicles): 21 W (W21W)
12- Rear turn-signal lamps: 21 W (WY21W)
BK-XP08E1ENUK.en-uk.book Page 44 Monday, August 13, 2007 2:20 PM

Maintenance
8-47
8
Replacement of low beam (discharge lamp type)Do not attempt to disassemble or repair discharge headlamps,
and do not attempt to replace their bulbs.
CAUTION
!●Handle halogen lamp bulb with care. The gas inside
halogen lamp bulb is highly pressurized, so drop-
ping, knocking, or scratching a halogen lamp bulb
can cause it to shatter.●Never hold the halogen lamp bulb with a bare hand,
dirty glove, etc.
The oil from your hand could cause the bulb to
break the next time the headlamps are operated.
If the glass surface is dirty, it must be cleaned with
alcohol, paint thinner, etc., and refit it after drying it
thoroughly.
CAUTION
!●A high voltage is present in the power circuit and in
the bulbs and bulb terminals. To avoid the risk of an
electric shock, contact by a MITSUBISHI
MOTORS Authorized Service Point whenever
repair or replacement is necessary.
BK-XP08E1ENUK.en-uk.book Page 47 Monday, August 13, 2007 2:20 PM

8-48 Maintenance
8
Replacement of high beam Petrol-powered vehicles1. Pull out the connector (B) while pressing the tab (A). Turn
the cap (C) anticlockwise and remove it.
Diesel-powered vehicles1. Remove the bolt (A) to remove the power steering reser-
voir tank (B).
BK-XP08E1ENUK.en-uk.book Page 48 Monday, August 13, 2007 2:20 PM