Page 145 of 487
143
2-2. Instrument cluster
2
When driving
RX400h_U
Multi-information display
The multi-information display presents the driver with a variety of driving
related data, including the status of the hybrid system.
●Odometer and trip meter
display
Odometer displays the total
distance the vehicle has been
driven.
Trip meter displays the dis-
tance the vehicle has been
driven since the meter was
last reset. Trip meters A and B
can be used to record and
display different distances
independently.
● Energy monitor (
→P. 2 8 )
Displays the status of the
hybrid system.
● Dynamic laser cruise control
display (if equipped)
(
→P. 1 6 0 )
Automatically displayed
when using dynamic laser
cruise control.
● Warning messages
(
→P. 398)
Automatically displayed
when a malfunction occurs in
one of the vehicle's systems.
Page 146 of 487
144
2-2. Instrument cluster
RX400h_U
Trip information■ Outside temperature
■ Average fuel consumption after refueling
■ Current fuel consumption
Displays the outside air temperature.
The temperature range that can be displayed is
from -22°F (-30°C) to 122°F (50°C).
Displays the average fuel consumption since the
vehicle was last refueled.
Displays the current rate of fuel consumption. Display items can be switched
by pushing the DISP. switch.
Page 147 of 487
145
2-2. Instrument cluster
2
When driving
RX400h_U
■Outside temperature display
In the following situations, the correct outside temperature may not be displayed, or
the display may take longer than normal to change.
●When stopped, or driving at low speeds (less than 12 mph [20 km/h])
●When the outside temperature has changed suddenly (at the entrance/exit of a
garage, tunnel, etc.)
NOTICE
■The multi-information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal informa-
tion display. At extremely low temperatures, the information display monitor may
respond slowly, and display changes may be delayed.
Page 148 of 487
146
2-2. Instrument cluster
RX400h_U
Trip information display (without navigation system)
Display and operation
Display items can be switched by
pushing the INFO switch.
The trip information display presents the driver with a variety of driving-
related data.
Trip information display
• Driving time
• Average fuel consumption
• Current fuel consumption
• Driving distance
Page 149 of 487
147
2-2. Instrument cluster
2
When driving
RX400h_U■
Driving time
■ Average fuel consumption
■ Current fuel consumption
■ Driving distance Displays the elapsed time after the hybrid system
starts.
When the hybrid system is started, driving time is
counted from 0:00. Up to 11:59 (11 hours, 59 minutes)
can be displayed.
Displays the average fuel consumption since the
vehicle was last refueled.
Displays the current rate of fuel consumption.
Displays the driving distance since the hybrid system
was started.
The function can be reset by pushing the INFO switch
for longer than one second when the driving distance is
displayed.
CAUTION
■Caution while driving
Do not adjust the display while driving.
Doing so may cause the driver to mishandle the vehicle and an accident, resulting in
death or serious injury.
Page 150 of 487
148
RX400h_U
2-3. Operating the lights and windshield wipers
Headlight switch
Turning on the high beam headlightsWith the headlights on, push the
lever forward to turn on the high
beams.
Pull the lever back to the center
position to turn the high beams off.
Pull the lever toward you to turn
on the high beams.
Release to turn them off. You can
flash the high beams with the head-
lights on or off.
The headlights can be operated manually or automatically.
The side marker, parking,
tail, license plate and
instrument panel lights
turn on.
The headlights and all
lights listed above turn
on.
The headlights and park-
ing lights turn on and off
automatically.
(When the engine switch
is in the ON position) U.S.A.
Canada
Page 151 of 487

149
2-3. Operating the lights and windshield wipers
2
When driving
RX400h_U
AFS (vehicles with discharge headlights)AFS (Adaptive Front Lighting System) improves visibility at intersections
and on curves by automatically adjusting the direction light axis of the
headlights according to vehicle speed and the degree of the tire angle
that are controlled by steering input.
Operates at speeds of 18 mph (30 km/h) or higher.
■ Deactivating AFS
Turn the switch OFF to deactivate
AFS.
OFF
ON
■Daytime running light system
To make your vehicle more visible to other drivers, the headlights turn on automati-
cally (at a reduced intensity) whenever the hybrid system is started and the parking
brake is released. Daytime running lights are not designed for use at night.
■Headlight control sensor
The sensor may not function properly if an
object is placed on the sensor, or anything
that blocks the sensor is affixed to the wind-
shield.
Doing so interferes with the sensor detecting
the level of ambient light and may cause the
automatic headlight control system to mal-
function.
Page 152 of 487

150
2-3. Operating the lights and windshield wipers
RX400h_U
■Automatic light off system
●When the headlights come on: The headlights and tail lights turn off 30 seconds
after all doors are closed with the engine switch turned to the ACC or LOCK
position. (The light turns off immediately if the LOCK button on the key is pressed
after all doors are locked.)
●When only the tail lights come on: The tail lights turn off automatically with the
engine switch turned to the ACC or LOCK position and the driver’s door is
opened.
To turn the lights on again, turn the engine switch to the ON position, or turn the
light switch OFF once and then back to the
or position.
■Automatic headlight leveling system (vehicles with discharge headlights)
The level of the headlights is automatically adjusted according to the number of
passengers and the loading condition of the vehicle to ensure that the headlights do
not interfere with other road users.
■If the indicator flashes... (veh icles with discharge headlights)
It may indicate a malfunction in the system. Contact your Lexus dealer.
■Customization that can be configured at Lexus dealer
Setting (e.g. light sensor sensitivity) can be changed. (Customizable features
→ P. 4 5 8 )
NOTICE
■To prevent 12-volt battery discharge
Do not leave the lights on longer than necessary when the hybrid system is off.