2006 YAMAHA BANSHEE 350 Notices Demploi (in French)

Page 345 of 400

YAMAHA BANSHEE 350 2006  Notices Demploi (in French) 8-100
FBU00570
Contrôle et lubrification des câbles
XG
Contrôler régulièrement les câbles et les rem-
placer s’ils sont endommagés. Un câble de
commande dont la gaine est endommagée
risque

Page 346 of 400

YAMAHA BANSHEE 350 2006  Notices Demploi (in French) 8-101
EBU00737
Brake and shift pedal/brake and clutch lever
lubrication
Lubricate the pivoting parts of each lever and
pedal.
EBU15060
Lubricating the front upper and lower arm
pivots
Lubricate the up

Page 347 of 400

YAMAHA BANSHEE 350 2006  Notices Demploi (in French) 8-102
FBU00737
Lubrification des pédales de sélection et de
frein et des leviers de frein et d’embrayage
Lubrifier les points pivotants de chaque levier et
pédale.
FBU15060
Lubrification du pivot

Page 348 of 400

YAMAHA BANSHEE 350 2006  Notices Demploi (in French) 8-103
EBU00987
Rear arm pivot lubrication
Lubricate the rear arm pivots.
Recommended lubricant:
Lithium-soap-based grease

Page 349 of 400

YAMAHA BANSHEE 350 2006  Notices Demploi (in French) 8-104
FBU00987
Lubrification du pivot de bras arrière
Lubrifier le pivot du bras arrière.
SBU00987
Lubricación de los pivotes del brazo trasero
Lubrique los pivotes del brazo trasero.
Lubrifiant re

Page 350 of 400

YAMAHA BANSHEE 350 2006  Notices Demploi (in French) 8-105
EBU01112
Wheel removal
1. Loosen the wheel nuts.
2. Elevate the ATV and place a suitable stand
under the frame.
3. Remove the nuts from the wheel.
4. Remove the wheel.
EBU00871
Wheel installatio

Page 351 of 400

YAMAHA BANSHEE 350 2006  Notices Demploi (in French) 8-106
FBU01112
Dépose d’une roue
1. Desserrer les écrous de roue.
2. Surélever le VTT et placer un support adé-
quat sous le cadre.
3. Retirer les écrous de la roue.
4. Déposer la roue.
FBU008

Page 352 of 400

YAMAHA BANSHEE 350 2006  Notices Demploi (in French) 8-107
EBU16000
Replacing a headlight bulb
If a headlight bulb burns out, replace the bulb as
follows.
1. Remove the screw holding the headlight
unit assembly to the headlight body.
2. Remove the bulb