2006 LAND ROVER FRELANDER 2 engine coolant

module), regulates t he amount of exhaus t gas es reci rculated into the ai r int ake s ys tem. The ECM uses s i gnals fromvarious engine s ens ors and calculates a res pons e bas ed on t he embedded software algori thm t o cont rol exhaus t gasrecircul ati on. The ECM trans mi ts this cont rol s ignal t o t he valve's actuat or, which i s clos ed-loop controlled wit h t he mas sair flow (MAF) s ens or providi ng the feedback t o t he ECM.
COMPONENT DESCRIPTION
Exhaust Gas R ecirculation (EGR) Valve and Cooler Assembly
ItemPart NumberDescription1-Actuator
2-Coolant out let
3-CoolerThe EGR valve and cooler ass embl y is l ocat ed on t he RH s ide of t he cylinder head above t he exhaus t manifold, ands ecured wit h 4 fixi ngs . An i nl et pipe connects the EGR cooler t o t he exhaus t manifold. A gas t rans fer t ube is rout ed acros st he engi ne and connect s t he EGR valve out let t o the intake mani fold hous ing.
A pi pe on t he EGR cool er body connect s to the cl imat e cont rol heater outl et hos e, and provides t he cool ant s upply t o t heEGR cooler. The EGR cooler outl et connect s t o t he cool ant rail , locat ed on t he RH s ide of the engine. The cool ant rail isconnected bet ween the t hermal control modul e and the coolant pump rear hous ing.For addit ional informat ion, refer t o: Engi ne Cooling (303-03A Engine Cooli ng - I6 3.2L Pet rol, Des cri pt ion and Operati on).
The EGR i s cont rol led by t he ECM, and is enabled when t he engine meet s t he correct operati ng temperatures and undercruis i ng condit ions .
Oil Separator

DT C
Description Possible Causes Action
P011300 Intake air t emperat ure
s ensor 1 ci rcuit high Intake ai r temperat ure (IAT)
s ens or 1 ci rcuit : s hort circuit
t o power Intake ai r temperat ure (IAT)
s ens or 1 ci rcuit : open ci rcuit Intake ai r temperat ure (IAT)
s ens or fail ure Check t he IAT s ens or and circuit s (the IAT s ens or
is i ncorporated i nto the MAF sens or). Refer to the
electrical gui des . Ins t all a new s ens or as
required.
REFER to: Mas s Air Flow (MAF) Sens or (303-14A
Electroni c Engi ne Control s - I6 3.2L Pet rol ,
Removal and Inst all at ion).
P011400 Intake air t emperat ure
s ensor 1 ci rcuit
i nt ermit tent/errati c Intake ai r temperat ure (IAT)
s ens or 1 ci rcuit : high
res is tance Intake ai r temperat ure (IAT)
s ens or fail ure Check t he IAT s ens or and circuit s (the IAT s ens or
is i ncorporated i nto the MAF sens or). Refer to the
electrical gui des . Ins t all a new s ens or as
required.
REFER to: Mas s Air Flow (MAF) Sens or (303-14A
Electroni c Engi ne Control s - I6 3.2L Pet rol ,
Removal and Inst all at ion).
P017100 Sys tem too l ean (bank 1) Intake ai r leak
- Bet ween MAF s ensor and
cyli nder head Fuel s ys t em rest ri ct ion
MAF sens or fault
- Low int ake flow Exhaust l eak, before catalyt ic
converter Check for intake ai r leaks . Check for low fuel
pres sure and MAF s ens or DTCs . Rect ify as
neces sary. Check for exhaus t l eaks before t he
cat alyti c convert er
P017200 Sys tem too rich (bank 1) Res t rict ed air filt er O il cont aminat ed wit h fuel
- Too many col d s tarts wit h
vehicle subs equent ly not
get ti ng hot enough for l ong
enough Leaking fuel i njectors
MAF sens or fault
- High i nt ake fl ow Leaking evaporati ve emis s ion
s ys tem purge valve Check t he condi ti on of the ai r cl eaner element :
REFER to: Air Cl eaner (303-12A Int ake Air
Dis t ribut ion and Fil tering - I6 3.2L Pet rol ,
Removal and Inst all at ion).
Check engine t he oil condi ti on. Check for l eaki ng
inject ors . Check for MAF s ens or, i njector and
evaporat ive emi s si on s ys t em DTCs .
P017400 Sys tem too l ean (bank 2) Intake ai r leak
- Bet ween MAF s ensor and
cyli nder head Fuel s ys t em rest ri ct ion
MAF sens or fault
- Low int ake flow Exhaust l eak, before catalyt ic
converter Check for intake ai r leaks . Check for low fuel
pres sure and MAF s ens or DTCs . Rect ify as
neces sary. Check for exhaus t l eaks before t he
cat alyti c convert er
P017500 Sys tem too rich (bank 2) Res t rict ed air filt er O il cont aminat ed wit h fuel
- Too many col d s tarts wit h
vehicle subs equent ly not
get ti ng hot enough for l ong
enough Leaking fuel i njectors
MAF sens or fault
- High i nt ake fl ow Leaking evaporati ve emis s ion
s ys tem purge valve Check t he condi ti on of the ai r cl eaner element :
REFER to: Air Cl eaner (303-12A Int ake Air
Dis t ribut ion and Fil tering - I6 3.2L Pet rol ,
Removal and Inst all at ion).
Check engine t he oil condi ti on. Check for l eaki ng
inject ors . Check for MAF s ens or, i njector and
evaporat ive emi s si on s ys t em DTCs .
P050600 Idle ai r cont rol s ys t em
RPM lower than expect ed Intake ai r res tricti on Res t rict ed/Contami nat ed
i njector/fuel s ys tem Access ory drive overl oad
(defecti ve/s ei zed component) Variable intake s ys tem (VIS)
fault Throt t le body faul t Check t he int ake air s yst em, air cleaner, et c.
Check t he fuel s yst em for
res trict ion/contami nat ion. Check the acces s ory
dri ve driven component s for exces s ive res is tance
to turni ng/s eizure. Rect ify as neces s ary. Check
for DTCs i ndi cat ing a VIS or t hrot tl e body fault .
P050700 Idle ai r cont rol s ys t em
RPM hi gher t han
expect ed Intake ai r leakage Variable intake s ys tem (VIS)
fault Throt t le body faul t Check t he int ake air s yst em for leakage. Recti fy
as neces s ary. Check for DTCs i ndicat ing a VIS or
thrott le body faul t.
P050B00 Cold st art i gnit ion t imi ng
performance Bl ocked i nt ake s ys t em St icking/s l ow t hrott le
Poor engi ne condi ti on Check t he int ake air s yst em, including the ai r
cl eaner element . Carry out a compl ete vehicl e
read for relat ed DTCs. Recti fy as neces sary.
P061A00 Internal cont rol module
t orque performance Ai r leakage in t he i nt ake
s ys tem aft er the MAF sens or
and t hrot tl e body Throt t le body faul t
Mas s ai r fl ow (MAF) s ens or
fault Engine coolant t emperature
(ECT) sens or fault Fl ywheel s ens or fault Retrieve t he fl ight recorder dat a and cus tomer
s tat ement for ret urn t o engineeri ng for analysi s .
Check t he int ake s ys t em for leakage. Check for
DTCs indicati ng a t hrot tl e body, s ensor or VVT
fault . Rect ify as neces s ary. Refer t o t he warrant y
pol icy and procedures manual if a modul e is
s us pect .

DT C
Description Possible Causes Action
Mani fold air pres s ure (MAP)
s ens or fault Cams haft res et valve fault
Variable val e ti mi ng (VVT)
fault ECM fault
P061A62
Internal cont rol module
t orque performance -
s ignal compare fai lure Ai r leakage in t he i nt ake
s ys tem aft er the MAF sens or
and t hrot tl e body Throt t le body faul t
Mas s ai r fl ow (MAF) s ens or
fault Engine coolant t emperature
(ECT) sens or fault Fl ywheel s ens or fault
Mani fold air pres s ure (MAP)
s ens or fault Cams haft res et valve fault
Variable val e ti mi ng (VVT)
fault ECM fault Retrieve t he fl ight recorder dat a and cus tomer
s tat ement for ret urn t o engineeri ng for analysi s .
Check t he int ake s ys t em for leakage. Check for
DTCs indicati ng a t hrot tl e body, s ensor or VVT
fault . Rect ify as neces s ary. Refer t o t he warrant y
pol icy and procedures manual if a modul e is
s us pect .
P061B64 Internal cont rol module
t orque performance -
s ignal plausi bil it y fai lure Ai r leakage in t he i nt ake
s ys tem aft er the MAF sens or
and t hrot tl e body Throt t le body faul t
Mas s ai r fl ow (MAF) s ens or
fault Engine coolant t emperature
(ECT) sens or fault Fl ywheel s ens or fault
Mani fold air pres s ure (MAP)
s ens or fault Cams haft res et valve fault
Variable val ve ti ming (VVT)
fault ECM fault Retrieve t he fl ight recorder dat a and cus tomer
s tat ement for ret urn t o engineeri ng for analysi s .
Check t he int ake s ys t em for leakage. Check for
DTCs indicati ng a t hrot tl e body, s ensor or VVT
fault . Rect ify as neces s ary. Refer t o t he warrant y
pol icy and procedures manual if a modul e is
s us pect .
P222700 Baromet ri c pres s ure
circui t -
range/performance BARO s ens or fai lure
- the BARO sens or is
i nternal t o t he ECM Refer to the warrant y policy and procedures
manual i f a module is s us pect.
P222721 Baromet ri c pres s ure
circui t range/performance
- s ignal ampli tude l es s
t han mini mum BARO s ens or fai lure
- the BARO sens or is
i nternal t o t he ECM Refer to the warrant y policy and procedures
manual i f a module is s us pect.
P222722 Baromet ri c pres s ure
circui t range/performance
- s ignal ampli tude
great er than maximum BARO s ens or fai lure
- the BARO sens or is
i nternal t o t he ECM Refer to the warrant y policy and procedures
manual i f a module is s us pect.
P222800 Baromet ri c pres s ure
circui t low BARO s ens or fai lure
- the BARO sens or is
i nternal t o t he ECM Refer to the warrant y policy and procedures
manual i f a module is s us pect.
P222900 Baromet ri c pres s ure
circui t high BARO s ens or fai lure
- the BARO sens or is
i nternal t o t he ECM Refer to the warrant y policy and procedures
manual i f a module is s us pect.

ItemPart NumberDescription
1-Sol enoid-operated valve
2-Intake mani fold hel ical swirl port3-Vacuum-operat ed act uator
4-Intake mani fold fi ll ing port
5-But terfl y val ve (4 off)Port de-act ivati on is operat ed by 4-but terfl y val ves connect ed on a common shaft within t he i nt ake manifold. Eachbutt erfly valve i s housed wit hi n a corres ponding i ntake mani fold upper fi ll ing port . The common s haft i s connected t o avacuum-operated actuat or, and is operat ed by a sol enoi d val ve under t he cont rol of the ECM. The vacuum requi red for portde-acti vat ion i s s uppl ied from t he engi ne mounted vacuum pump.
For addit ional informat ion, refer t o:
Engi ne (303-01B Engine - TD4 2.2L Di esel , Des cri pti on and Operati on),Elect roni c Engi ne Cont rol s - 2.2L Dies el (303-14 Electronic Engine Controls - 2.2L Dies el, Des cript ion and Operat ion).
Port de-act ivati on (opening of t he fi ll ing port s ) onl y occurs when the coolant t emperature is greater t han 10°C, and undert he foll owing condit ions:
Engi ne s peed is great er than 1,800 rpm.Engi ne load i s great er than 15%.

t he ignit ion t imingt he engi ne load.
The ECM moni tors the MAF s ens or for faul ts and can s t ore fault rel ated codes. Thes e can be ret ri eved us ing a Land Roverapproved diagnos t ic s yst em.
Int ake Air Temperat ure (IAT) Sens or
The IAT s ens or measures the temperat ure of t he i nt ake air entering t he engine. The sens or is a temperat ure dependantres is t or (t hermi st or). The thermis t or i s a NTC sens or element. The el ement resi s tance decreas es as t he s ens ort emperature increas es. The ECM suppli es the sens or wit h a 5V reference volt age and a ground and meas ures the returneds ignal as a t emperature.
The res is t ance i n t he s ens or changes wi th i ntake air t emperat ure. A l ow i nt ake air temperature wi ll res ult i n a hi gh vol tagebeing returned t o t he ECM and hi gh int ake ai r temperature wil l ret urn a low volt age reading of bet ween 0 - 5V.
The ECM moni tors the IAT s ens or for fault s and can s tore faul t relat ed codes . Thes e can be retrieved us ing a Land Roverapproved diagnos t ic s yst em. If the IAT s ensor fails , t he ECM us es a defaul t temperature val ue usi ng the fuel railpres s ure/t emperat ure s ensor.
Knock Sensors
Two knock sens ors are located on the front of t he engi ne and are each s ecured to threaded holes in t he engine cylinderblock wit h a bol t. The knock sens ors are us ed by t he ECM t o monit or combus ti on knocking or vibrati on generat ed byignit ion combus ti on. The knock s ens ors are each connected t o t he ECM via a t wis t ed pai r of wires which reduces electricalint erference di s rupti ng t he si gnal produced.
Each knock s ens or cont ains a pei zo-ceramic crys t al whi ch produces a vol tage when an ext ernal force appli es pres s ure orload on it . W hen t he engi ne is runni ng, compres s ion waves produced by t he combus t ion proces s, creat es pres sure waveswhich pas s t hrough the engine cyli nder bl ock. Thes e press ure waves are detected by the knock s ens ors and the defl ect ionof the crys t al caus ed by the pres sure waves caus es the sens ors t o produce an out put s ignal. The s i gnals are pas s ed to theECM whi ch compares them wit h s tored mapped s ignal s i n it s memory.
The ECM can t hen det ermine when t he correct combus t ion occurs i n indivi dual cyl inders . If incorrect combus t ion detonat ionis det ect ed, the ECM can retard t he ignit ion ti ming on that cyl inder for a number of combus ti on cycl es . The i gni ti on ti mingwil l be gradually ret urned t o it s opti mal s et t ings. If t he knock is st il l det ected the ECM wi ll i ncreas e t he i nject ion period,which has a cooli ng effect on t hat cyl inder.
The s ignals from the knock s ens ors are us ed i n conjunct ion wi th the CMP sens ors and t he CKP s ens or t o det ermi ne theignit ion cycle and t herefore i dent ify which cylinder is knocki ng. The ECM is programmed to us e i gni ti on maps bas ed on highqual it y 95-98 RO N fuel . If fuel of a poor qual it y s uch as 91 RON i s us ed the engi ne may s uffer from knock (pinking) for aperi od of ti me. The ECM is capable of l earning and adapti ng to the l ow grade fuel and wil l modi fy it s int ernal ignit ionmapping t o compens at e for t he low grade fuel . Thi s feat ure of t he ECM i s called adapt ion.
If one or bot h knock s ensors fai l or the s ignal becomes i mplaus ible, t he ECM wi ll cancel clos ed loop cont rol of t he ignit ions ys t em. The ECM wi ll us e a defaul t 's afe' ignit ion map to ens ure the pre-det onat ion does not damage the engine bys ett ing maxi mum retard cont rol on s park advance. The dri ver may not ice 'pinking' under certai n dri vi ng condi ti ons and alos s of performance. The ECM monit ors t he knock s ens ors for fault s and can st ore fault relat ed codes . Thes e can beret ri eved us i ng a Land Rover approved diagnos t ic s ys tem.
Engine Coolant Temperature (ECT) Sensor

The ECT s ens or is locat ed i n t he thermost at hous ing, on t he front of the engine, below t he i nl et manifol d. The ECT s ens oris a t hermis t or type s ens or us ed by the ECM t o monit or the engine coolant t emperature. The ECM uses t he t emperatureinformat ion for the foll owi ng functi ons:
regulat e t he inject ion peri ods et engi ne idle target s peedcont rol t he engi ne cool ing fan(s )determine operat ion of t he A/C compres sordetermine operat ion of t he purge valve and catal yt ic convert er heat ing funct ion.
The s ens or is a Negat ive Temperat ure Co-efficient (NTC) thermis tor element . The element res is t ance decreas es as thes ens or t emperature increas es. The ECM suppli es the sens or wit h a 5V reference volt age and a ground and meas ures theret urned s ignal as a t emperature.
The ECT s ens or is important to the correct running of t he engi ne as a richer mixt ure i s required at low engi ne cool antt emperatures for efficient s tarti ng and s mooth cold running. As t he engi ne cool ant temperat ure i ncreas es , the ECM usest he temperat ure si gnal from the sens or to l ean off t he fuel mi xt ure to maint ai n optimum emis s ions and performance.
The ECM moni tors the ECT sens or for faul ts and can s t ore faul t rel at ed codes . These can be ret ri eved us ing a Land Roverapproved diagnos t ic s yst em. If the ECT sens or fail s, t he ECM us es a defaul t val ue of 90°C (194°F). The electric fan cont rolmodule i s s ent a default coolant temperat ure val ue of 105°C (221°F) and s wit ches t he cooling fan on permanent ly.
Engine Oil Level/Temperature Sensor
The engi ne oil l evel/t emperature s ens or is locat ed on t he unders ide of t he engi ne and is secured i n t he engi ne oil pan wi th3 s crews and i s s eal ed wi th an O-ring s eal. The ECM suppli es the s ens or wit h a 5V reference volt age and two wires s uppl yt he temperat ure and oi l level si gnal s back t o t he ECM.
Two t ypes of engine oi l level /t emperat ure s ensor are us ed. On earli er model s a capacit ive oi l level s ens or i s fit ted and wasrepl aced by an ul trasound l evel s ens or on l at er models . The principl e of the temperat ure s ens or i s t he s ame in bot h s ens ort ypes . The sens ors can be i dent ified by di fferences in t he s ens or housi ngs ; t he capacit ive s ensor has t he electricalconnector moulded s quare t o t he bas e of the s ens or, t he ult ras oni c s ens or has the connect or moulded at a s li ght angle tot he bas e of t he s ens or.
The ECM us es both the oi l l evel and t emperature s ignals t o calculat e t he oil level. Temporary oil level changes caus ed byhil l driving or cornering are taken i nt o account by t he ECM us ing addit ional informat ion s uch as vehi cl e s peed and engi neload.
Engi ne Oi l Level Sens or - Capacit ance Type
The engi ne oil l evel s ens or compris es t wo capaci ti ve gauge el ement s . Thes e meas ure the resi s tance to elect rical currentpass i ng through t he engine oi l.
There are t wo capacit ors , one meas uring t he permit ti vi ty of t he oil and a second with t wo pl at es s et verti cal ly meas uri ngt he hei ght . The s econd capaci tor wil l have a proport ion of oil and ai r bet ween t he plates and s i nce t he permit ti vi ty of ai r isdifferent t o t hat of oi l, t he permi tt ivit y readi ng wil l change as t he level of oi l decreas es and the ai r between t he plat e gapincreas es. This permi tt ivit y readi ng is compared t o t hat of the oi l (t aken by t he first capaci tor) and an oil level is derived.
Engi ne Oi l Level Sens or - Ult ras ound Type

The s peed control inhibit swi tch i s att ached to t he brake pedal bracket , adjacent t o t he s top l amp s wit ch. W hen the brakepedal i s pres s ed, a pl ate on the pedal moves away from t he s wit ch plunger al lowing the pl unger to ext end and completet he swit ch contact s.
The s wit ch receives a power s upply from t he CJB which s enses the complet ed ground path when the s wi tch i s operated.The s wit ch has two functi ons ; it is us ed for s t art ing purpos es when the brake pedal mus t be pres s ed before engi necranking i s allowed and it is used t o s us pend speed cont rol operat ion when s peed cont rol i s act ive and t he brake pedal ispres s ed.
The CJB can diagnos e t he operat ion of t he speed control i nhibit s wi tch and t he s tat us of the s wi tch can read us ing a LandRover approved diagnost ic sys tem.
Main Relay
The main rel ay is l ocat ed in the BJB. The operati on of the mai n rel ay is cont roll ed by t he ECM which provi des a groundpath for the main relay coil , energi zing t he rel ay and cl osi ng t he rel ay cont act s.
The main rel ay suppli es bat t ery volt age to the foll owing engine s ensors and act uators:
Electric t hrot tl e - TP s ensor (via ECM)Fuel i njectorsIgni ti on coi lsCoil Capaci torVari abl e inl et cam profile swit ching sol enoi d - front and rearInt ake tract variable mani fol d mot orPlenum variable i ntake manifold motorHO2SPurge valveFuel t ank leakage monit oring pump (NAS onl y).
Air Conditioning (A/C) Pressure Sensor
The refri gerant pres sure s ens or provides t he Air Temperat ure Cont rol (ATC) module wit h a press ure input from t he highpres s ure s ide of t he refrigerant s ys t em. The refri gerant press ure s ens or is hardwired to the ECM, which us es t he s ignal t ocont rol operat ion of t he A/C compress or and to cal cul at e t he addit ional l oad on t he engi ne when t he A/C compress or isoperati ng.
The ECM al so broadcas ts the refrigerant high press ure val ue over t he high s peed Controller Area Network (CAN) bus t o t heCJB. The CJB relays the si gnal t o t he ATC module over t he medium speed CAN bus t o i ncreas e the amount of recircul at edair i f required.
Air Conditioning (A/C) Relay
The A/C rel ay is l ocat ed in the BJB. The operati on of the A/C relay i s cont roll ed by t he ECM whi ch provi des a ground pat hfor t he A/C rel ay coi l, energizi ng the relay and clos ing the relay cont acts .
W hen t he rel ay cont act s are clos ed, batt ery vol tage i s s uppl ied via the relay t o t he A/C compress or clut ch. The ECMcont rol s the operat ion of t he vari abl e dis placement compress or us ing a s i gnal li ne to t he compress or and received s ignalsfrom the A/C pres s ure sens or.
Air Conditioning Compressor Control
Compres s or di spl acement is cont roll ed by t he ECM bas ed on current evaporator t emperature and target evaporat ort emperature s ignals received from t he ATC module. From thes e values t he ECM calcul ates t he requi red compres s ordis placement and provi des a Puls e W idt h Modul ated (PW M) s i gnal t o t he compress or s olenoi d valve. The compress ors olenoi d valve i s mounted on the rear of t he compres s or and i nterprets the PW M s ignal as a dis placement val ue and alt erst he pos i ti on of the i nternal s wash plate accordi ngl y.
The ECM wi ll als o reduce t he dis placement of the A/C compres s or to i ts mini mum l evel i f 'ful l throt t le' or aut omati ct ransmis s ion 'ki ck down' is request ed. Thi s feat ure i s not pres ent on Gul f s pecificati on vehi cl es. Compress or clutchengagement is cont roll ed by t he ECM.
Engine Cooling Fan Control
The ECM has a hardwired connect ion wit h t he cooli ng fan cont rol module. The ECM output s a PW M s ignal to the fan cont rolmodule whi ch rel at es t o t he required fan s peed. The fan s peed is det ermi ned by factors s uch as engi ne coolantt emperature and A/C operati on. The fan cont rol module react s t o t he received s ignal by cont roll ing t he operat ing volt age of

Symptom(general)Symptom (specific)Possible causesAction
faultIgnit ion s ys tem faultSt icking vari able valve t iming(VVT) hubAccelerat or pedal posi ti on(APP) s ens or fault
Engine s urgesFuel pump faul tFuel li ne faultMas s ai r fl ow (MAF) s ens orfaultThrott le pos it ion (TP) s ens orsfaultThrott le motor faul tIgnit ion s ys tem fault
Check t he fuel pump and l ines. Check forDTCs indicati ng a s ens or or ignit ion sys temfault . Rect ify as neces s ary.
Engine detonates /knocksFuel pump faul tFuel li ne faultFuel qual it yKnock s ens or (KS)/ci rcuitmalfuncti onMas s ai r fl ow (MAF) s ens orfaultHeat ed oxygen s ensor (HO2S)faultSt icking vari able valve t iming(VVT) hubBarometric press ure (BARO)sens or malfuncti on (internalengine cont rol module (ECM)fault )
Check t he fuel pump and l ines. Check thefuel for cont aminat ion and correct grade.Check for DTCs i ndi cat ing a s ens or, VVT orECM fault . Rect ify as neces s ary. Refer t o t hewarrant y policy and procedures manual if anECM is sus pect .
No t hrot tl e res ponseAccelerat or pedal posi ti on(APP) s ens or faultThrott le pos it ion (TP) s ens orsfaultThrott le motor faul t
Check for DTCs i ndi cat ing a s ens or orthrot tl e mot or fault . Rect ify as neces s ary.
Speed cont rol inhibi ted ordis abledDefault mode enabledSpeed control s wi tch(es )Thrott le pos it ion (TP) s ens orsfaultCont roll er area network (CAN)fault
Check t he mes sage center for defaul tmess ages. Check for DTCs i ndi cat ing a speedcontrol, s ensor or CAN fault . Rect ify asnecess ary.
Poor throt tl e respons eBreather s ys t emdi s connect ed/res t ri ct edAccelerat or pedal posi ti on(APP) s ens or faultThrott le pos it ion (TP) s ens orsfaultEngine coolant t emperature(ECT) s ens or faultMas s ai r fl ow (MAF) s ens orfaultTransmis si on mal funct ion
Check t he engi ne breather s yst em. Check forDTCs indicati ng a s ens or or transmis s ionfault . Rect ify as neces s ary.
Engine default s , warningli ght and mess ages. Refert o t he owner handbook
Thrott le pos it ion (TP) s ens orsfaultMas s ai r fl ow (MAF) s ens orfaultEngine coolant t emperature(ECT) s ens or fault
Check for DTCs i ndi cat ing a s ens or fault .Rect ify as neces sary.
DTC Index
• NOTE: If a cont rol module or component i s s uspect and the vehicl e remai ns under manufacturer warrant y, refer t o t heW arranty Pol icy and Procedures manual (s ect ion B1.2), or determine i f any pri or approval program is i n operat ion, beforet he replacement of a component.
• NOTE: Generic scan t ool s may not read the codes li st ed, or may read only fi ve digit codes . Mat ch the five di git s from t hes can tool to the firs t fi ve di git s of the seven digi t code l is ted to ident ify t he faul t (t he las t t wo digi ts gi ve addi ti onalinformat ion read by the manufact urer approved diagnos t ic s ys tem).
• NOTE: W hen performing volt age or res is t ance t est s , always use a digi tal mult imeter (DMM) accurat e t o t hree deci malplaces, and wi th an up-t o-date cal ibrat ion cert ificate. W hen tes ti ng res is t ance al ways take t he res is t ance of t he DMMleads i nt o account .
• NOTE: Check and recti fy bas ic faul ts before beginni ng diagnos t ic rout ines i nvol vi ng pinpoint t es t s.
• NOTE: Ins pect connect ors for s igns of water ingres s , and pins for damage and/or corros ion.