2005 NISSAN 350Z Navigation Manual

Deleting the stored avoid areas1. Select the
Delete key on the screen shown
in step 5 under “Adjusting the stored avoid
areas”.2. Select the
Yes key when asked if you are
sure you want to delete the “avoid area”.
The “avoid area” is deleted.
If the route guidance is set, the display shows
the [AVOID AREA SETTING] screen.
INFO:
When the
No key is selected, the “avoid area”
will not be deleted, and the screen returns to the
previous one.3. Please refer to “Making the system guide the
route with detailed options” on page 5-32.
If the route guidance is not set, the display
shows the current vehicle location.
INV1675
INV1676
INV2456
How do I use the avoid area feature?
8-11


04.7.6/Z33-N


MEMO8-12
How do I use the avoid area feature?


04.7.6/Z33-N


9 How do I use the automatic rerouting
feature?Rerouting when the vehicle is off the suggested
route .......................................................................................... 9-2
Automatic rerouting ......................................................... 9-2
Detouring from the route temporarily .............................. 9-3


04.7.6/Z33-N


When you have strayed from the suggested
route during the route guidance, you can request
a reroute from the current location using the
automatic rerouting function.AUTOMATIC REROUTINGThis setting will reroute the vehicle automatically
when the driver deviates from the suggested
road. You will have to set the system for auto-
matic rerouting to enable this function.
1. Press the SETTING button.
2. Select the
Navigation key. 3. The display shows the [NAVIGATION SET-
TINGS] screen.
Select the
Auto Re-route On/Off key.
INV1466
INV2460
REROUTINGWHEN THE VEHICLE
IS OFF THE SUGGESTED ROUTE9-2
How do I use the automatic rerouting feature?


04.7.6/Z33-N


4. When turning on/off the auto reroute, select
the
On or
Off key.
When the PUSH ENTER button is pressed,
the selected key will be illuminated.
5. Press the MAP button.
The map screen will reappear, and the system
will start route calculation automatically.
INFO:

When optional routes are not found, the
original route will be displayed.

When the vehicle runs off the suggested
route with the automatic rerouting functionactivated, route recalculation will be at-
tempted so that the vehicle returns to the
original route. However, if the vehicle stays
off the route, the system will calculate a new
route.If you encounter a traffic jam, you can ask the
system to calculate a detour with the preset
distance.
NOTE:
The detour feature is only available when a
destination has been set.
1. Press the ROUTE button.
INV1680
DETOURINGFROM THE ROUTE
TEMPORARILY
How do I use the automatic rerouting feature?
9-3


04.7.6/Z33-N


2. Select the
Edit Route key. 3. Select the
Detour key. 4. Set the distance for detour calculation.
The system will look for a detour according to
the distance set from the current location.
INFO:

When the
Avoid the Current Street key is
selected, a detour route to approximately 20
miles (30km) will be calculated if the dis-
tance to the next guide point intersection
exceeds 20miles (30km).

If an alternative route cannot be found, the
previous route before calculation will be dis-
played.

If the vehicle is traveling at a high speed, the
INV1681
INV1682
INV1683
9-4
How do I use the automatic rerouting feature?


04.7.6/Z33-N


suggested detour may start from a point the
vehicle has already passed.
How do I use the automatic rerouting feature?
9-5


04.7.6/Z33-N


MEMO9-6
How do I use the automatic rerouting feature?


04.7.6/Z33-N