2004 DACIA SUPERNOVA Repair Manual

71
INTRENAL BODY TRIM
72 - 8
MIDDLE PILLAR LOWER COVERING
DISMOUNTING
Dismo unt :
- the obturator (2);
- the attachment screws (1 ) of the middle
pillar lower covering (3) from the upper and lower
area of the safety belt mounting.
REMOUNTING
Perform in the reverse order the dismounting
operations.
vnx.su

71
INTRENAL BODY TRIM
72 - 9
REAR SIDE PANEL COVERING
DISMOUNTING
Dismo unt :
- rear door frame gasket;
- hatchback frame gasket;
- the attachment screws (1) and (2) of the
rear side panel covering (3) on the panel lining.
- the protecting and the attachment screw
of the rear safety belt on the rear side panel. Detach from clips (4) and (5) and release.
REMOUNTING
Per f o r m in the reverse order the
dismounting operations.
vnx.su

71
INTRENAL BODY TRIM
72 - 10
ROOF GASKET
DISMOUNTING
Dismount: the turn handles, front/rear safety
belts attachment on the upper area, ceiling lamps,
interior rear view mirror, sun visors, stop lamp,
volumetric sensors and the upper covering on
the roof outliner. Dismount the roof gasket (1 ) by detaching
from the clips (2).
REMOUNTING
Perform in the reverse order the dismounting
operations.
vnx.su

71
INTRENAL BODY TRIM
72 - 11
CARPETS
DISMOUNTING
Remove : - the complete t runk carpet (1 ) ;
- the rear carpet (2 ) after dismounting
the left/right rear coverings;
- the fron t carpet (3) after the
dismounting of the left/right door thresholds
coverings.
REMOUNTING
Perform in the reverse order the
dismounting operations.
vnx.su

71
INTRENAL BODY TRIM
72 - 12
DISMOUNTING
Detach the attachment clips
(1) of the noise
absorbent pad (2) on the cowl panel.
Release the noise absorbent pad.
REMOUNTING
Per f o r m in the reverse order the
dismounting operations. C
OWL PANEL NOISE ABSORBENT
vnx.su

72
SIDE OPENINGS ELEMENTS TRIM
72-1
DISMOUNTING
Fr
ont door panel replacement i s performed without t he dismounting of the door, and the
operations that must be performed are the following: Dismount the window regulator crank (2) that is mounted by clips attachment on the window
regulator axle. Dismount the inner opening mechanism (3), by dismounting the screw (4) and detaching from
the inner opening mechanism, the front door opening control rod, this rod being fixed on the plate
with the other end. Dismount the locking handle (8).
Dismount the screws (5) and remove the panel by clips detaching from the caisson of t he door.
Dismount the guiding case (6) and the locking button. (7).
REMOUNTING
Pe rform in the reverse order the dismounting operations taking into account the following
recommendations: -for the mounting of the inner opening mechanism, the opening control rod will be placed
in the position where the assembled plate with electric control is unblocked.
-after mounting, check the operation of the inner opening mechanism and its alignment
with the front door panel.
NOTE
The window regulator crank must be placed in horizontal position with the button
oriented toward front, the window being closed.
FRONT DOOR PANEL
vnx.su

72
SIDE OPENINGS ELEMENTS TRIM
72-2
DISMOUNTING
Rear door panel replacement is pe rformed without the dismounting of t he door, a nd the
following operations are to be performed :
Dismount the window regulator crank (2) that is mounted by clips attachment on the window
regulator axle. Dismount the inner opening mechanism (3), by dismounting the screw (4) and detaching from
the inner opening mechanism, the rear door opening control rod, which is fixed on the plate with
the other end.
Dismount the locking handle (5).
Dismount the screws (6 ) remove the panel by detaching it from the caisson of the door.
Dismount the guiding case (8) and the locking button (7).
REMOUNTING
Pe rform in the reverse order the dismounting operations taking into account the following
recommendations: -for the m ounting of t he outside opening mechanism, t he opening control rod will be
placed in the position where the assembled plate with electric control is unblocked. -after mounting, check the operation of the internal opening mechanism and its alignment
w ith the rear door panel.
NOTE
The window regulator crank must be placed in horizontal position with the button
oriented toward front, the window being closed.
REAR DOOR PANEL
vnx.su

74
BACK SEAT TABLES AND PARCEL SHELVES
74-1
DISMOUNTING
Extract the panel
(1 ) .
Dismount the attachment screws (3) of the
lateral supports (2) on the l ateral fra mes
linings.
REMOUNTING
Per f o r m in the reverse order the
dismounting operations. U
PPER BACK PANEL REPLACEMENT
vnx.su