Fig. 85: Installing Cooler Refrigerant Discharge Hose No. 1
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
16.INSTALL FAN AND GENERATOR V BELT (See REPLACEMENT
)
17.INSTALL AIR CLEANER INLET NO. 1 (See step 25 in REPLACEMENT
)
18.CONNECT NEGATIVE TERMINAL CABLE TO BATTERY
19.CHARGE REFRIGERANT (See REPLACEMENT
)
20.WARM UP ENGINE
21.INSPECT FOR REFRIGERANT LEAKAGE (See REPLACEMENT
)
ON-VEHICLE INSPECTION
1.INSPECT COOLER CONDENSER ASSY
a. If the fins of the cooler condenser assy are dirty, clean them with water and dry them with
3.REMOVE V-BANK COVER
4.REMOVE ENGINE ROOM SIDE COVER
5.DISCONNECT RADIATOR HOSE NO. 1
6.REMOVE TIMING BELT COVER SUB-ASSY NO. 3 LH (See step 18 in REPLACEMENT
)
7.REMOVE CAMSHAFT POSITION SENSOR
a. Remove the bolt, stud bolt and sensor.
Fig. 14: Removing Camshaft Position Sensor
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
8.INSTALL CAMSHAFT POSITION SENSOR
a. Install a new sensor with the bolt and stud bolt.
Torque: 7.5 N.m (76 kgf.cm, 66 in.lbf)
9.INSTALL TIMING BELT COVER SUB-ASSY NO. 3 LH (See step 33 in REPLACEMENT
)
10.CONNECT RADIATOR HOSE NO. 1
11.INSTALL AIR CLEANER INLET NO. 1 (See step 145 in REPLACEMENT
)
12.INSTALL ENGINE ROOM SIDE COVER
13.INSTALL V-BANK COVER
