2001 TOYOTA SEQUOIA oil gasket

F19232


N´m (kgf´cm, ft´lbf)
: Specified torque
 Non±reusable part

Precoated partTransfer Extension Housing Collar Snap Ring
Transfer Output WasherRear Output Shaft
Companion Flange
24 (245, 18)
Driven Sprocket Front Drive Chain
19 (194, 14)
Shift Shaft Stopper Rear Output Shaft
Sub±assy
 Gasket
37 (377, 27)
(Filler Plug) Clamp
28 (286, 21)
x12
Gear Shift Fork No. 1
Rear No. 2 Stopper
Shift ShaftSnap RingTransfer Shift
Actuator
 Gasket
 Oil Seal High and Low
Clutch Sleeve
Gear Shift Fork No. 2
x5 Front No. 2 Stopper Shift ShaftShift Inter±lock PinFront Drive Shift Fork ShaftTransfer Case Rear Snap Ring20 (204, 15)
No. 1 Plug
37 (377, 27)
(Drain Plug) No. 1 Plug
 Oil Seal
12 (122, 9)
20 (204, 15)
118 (1,203, 87)
TR±8
± TRANSFERTRANSFER ASSEMBLY
2946 Author: Date:
2005 SEQUOIA (RM1146U)

F06628
 Oil Seal
 Snap Ring
Bearing
Intermediate
Shaft No. 2
Differential
Tube

78 (800, 58)
78 (800, 58)


A.D.D. Actuator
21 (210, 15)
 Snap Ring
Intermediate
Shaft No. 1
Clutch Case
Sleeve
 Snap Ring
 O±ring
Clutch Hub

Oil Slinger
 Spacer
Companion
Flange
 Dust Deflector
 Oil Seal
Rear Bearing
Washer
Drive
Pinion
Front
Bearing
Differential Carrier
 Side Oil Seal
Drain Plug
65 (660, 48) Gasket
Filler Plug
39 (400, 29)
Ring Gear
69 (700, 51)
x10Side Bearing
Retainer
Side Bearing
x10
x5
 Plate Washer
97 (985, 71)
 Lock Plate
 Bearing
Differential
Case
 Bearing
Side Bearing
Straight Pin
 Plate Washer
Thrust Washer
Side Gear
Pinion Shaft
Pinion Gear
Thrust Washer
 Non±reusable part

Precoated part
N´m (kgf´cm, ft´lbf): Specified torque
78 (800, 58)
223 (2,273, 164)
± SUSPENSION AND AXLEFRONT DIFFERENTIAL CARRIER
SA±41
3037 Author: Date:
2005 SEQUOIA (RM1146U)

SA17R±04
F14272
122 (1,244, 90)

Oil Seal

O±ring
Parking Brake Assembly
Disc Brake Caliper

Bearing Retainer

Speed Sensor Rotor

Snap Ring

Bearing Retainer

Spring Washer
Backing PlateSerration Bolt

Hub Bolt
Oil Deflector

GasketAxle Shaft
N´m (kgf´cm, ft´lbf): Specified torque

Non±reusable partx6
105 (1,070, 77)
15.5 (158, 11)
Clip
Parking Brake Cable

Hub Bolt
8.0 (82, 71 in.´lbf)

Bearing Assembly SA±94
± SUSPENSION AND AXLEREAR AXLE SHAFT
3090 Author: Date:
2005 SEQUOIA (RM1146U)
REAR AXLE SHAFT
COMPONENTS

SA24A±02
F14277
F14278
F14279
F05103
SST
F14280
± SUSPENSION AND AXLEREAR AXLE SHAFT
SA±97
3093 Author: Date:
2005 SEQUOIA (RM1146U)
DISASSEMBLY
1. REMOVE BEARING RETAINER (DIFFERENTIAL SIDE)
AND SPEED SENSOR ROTOR
(a) Attach the 4 nuts to the serration bolts and remove the
serration bolts from the backing plate using a hammer.
NOTICE:
Do not reuse the nuts previously removed from the vehicle.
(b) Grind the retainer and sensor rotor surfaces using a grind-
er, then pry them out with a chisel and hammer.
2. REMOVE SNAP RING FROM AXLE SHAFT
Using a snap ring expander, remove the snap ring.
3. REMOVE REAR AXLE SHAFT FROM BACKING
PLATE AND BEARING ASSEMBLY
(a) Attach the washers and nut to the serration bolts, then
torque the nuts to install the serration bolts to the backing
plate.
(b) Remove the 4 nuts from the serration bolts.
(c) Position SST on the backing plate with the 4 nuts.
SST 09521±25011, 09521±25021
(d) Using a press, remove the rear axle shaft, spring washer
and bearing retainer from the backing plate.
(e) Remove the SST.
SST 09521±25011, 09521±25021
4. REMOVE OIL DEFLECTOR AND GASKET
Using a brass bar and hammer, remove the 6 hub bolts, oil de-
flector and gasket.

SA24B±02
F14284
Socket Wrench
F14286
F14287
SST
SST
F14288
SST
SST
± SUSPENSION AND AXLEREAR AXLE SHAFT
SA±101
3097 Author: Date:
2005 SEQUOIA (RM1146U)
REASSEMBLY
1. INSTALL BEARING ASSEMBLY
Position the backing plate on the bearing assembly and using
a press and 2 socket wrenches, install the serration bolts.
2. INSTALL OIL DEFLECTOR AND GASKET
Position a new gasket and oil deflector on the axle shaft and
install a washer and nut to a new hub bolt, as shown in the il-
lustration, and install the hub bolt by torquing the nut.
3. INSTALL REAR AXLE SHAFT TO BACKING PLATE
(a) Install the backing plate, spring washer and bearing re-
tainer on the rear axle shaft.
(b) Using SST and a press, install the rear axle shaft into the
backing plate.
SST 09631±12090, 09950±60020 (09951±01030)
4. INSTALL SNAP RING TO AXLE SHAFT
Using a snap ring expander, install a new snap ring.
5. INSTALL SPEED SENSOR ROTOR AND BEARING RE-
TAINER (DIFFERENTIAL SIDE)
Using SST and a press, install a new speed sensor rotor and
bearing retainer.
SST 09631±12090, 09950±60020 (09951±01030)
Standard length: 132.8 ± 1.0 mm (5.228 ± 0.039 in.)

SA15R±13
± SUSPENSION AND AXLEREAR DIFFERENTIAL CARRIER
SA±129
3125 Author: Date:
2005 SEQUOIA (RM1146U)
INSTALLATION
1. INSTALL DIFFERENTIAL CARRIER ASSEMBLY
(a) Install a new gasket.
(b) Install the differential carrier assembly with the 10 washers and nuts.
NOTICE:
Be careful not to damage the installation surface.
Torque: 73 N´m (740 kgf´cm, 54 ft´lbf)
2. CONNECT REAR PROPELLER SHAFT
2WD: See page PR±5
4WD: See page PR±9
3. INSTALL REAR AXLE SHAFTS (See page SA±102)
4. FILL DIFFERENTIAL WITH HYPOID GEAR OIL (See page SA±105)

F06720
Pressure Port Union
83 (850, 61)

O±Ring
Flow Control Valve
Spring

O±Ring
Suction Port Union
13 (130, 9)
Vane Pump Shaft
with Vane Pump Pulley

Oil Seal
Front Housing

Gasket
24 (240, 17)
Rear Housing

O±Ring
Wave Washer
Side Plate
Cam Ring

Straight Pin
Vane Pump
Rotor



Snap Ring x10Vane Plate
N´m (kgf´cm, ft´lbf): Specified torque

Non±reusable part
Power steering fluid
± STEERINGPOWER STEERING VANE PUMP
SR±27
3254 Author: Date:
2005 SEQUOIA (RM1146U)

Rack Housing Cap
59 (600, 43)
F13619
Turn Pressure TubeDust Cover
Turn Pressure Tube O±RingControl Valve
Housing
 Oil Seal
 Bearing
 Teflon Ring
Rack Guide Spring
Rack Guide
Sub±assembly
 Self±locking Nut  Bearing
N´m (kgf´cm, ft´lbf): Specified torque
Non±reusable part
Precoated part
Molybdenum disulfide lithium base grease
Power steering fluid
For use with SSTRack Housing Bearing
 GasketControl Valve Assembly



* Oil seal
15 (150, 11)
*13 (135, 10)18 (185, 13)


59 (600, 43)
*44 (450, 32)
Rack Guide
Spring Cap

25 (250, 18)
18 (185, 13)
15 (150, 11)
*13 (135, 10)
15 (150, 11)
*13 (135, 10)
15 (150, 11)
*13 (135, 10)
Rack Guide Spring
Cap Lock Nut  O±Ring
± STEERINGPOWER STEERING GEAR
SR±39
3266 Author: Date:
2005 SEQUOIA (RM1146U)