Page 3718 of 4323

BO47M±02
H16771
± BODYREAR NO.2 SEAT
BO±157
3710 Author: Date:
2005 SEQUOIA (RM1146U)
DISASSEMBLY
CAUTION:
Wear safety gloves, because the sharp edges and surfaces
of the seat frame may cause injury to the hands.
HINT:
The procedures listed below are for the LH side.
A bolt without a torque specification is shown in the stan-
dard bolt chart (see page SS±2).
1. REMOVE HEADRESTS
2. REMOVE RECLINING ADJUSTER RELEASE HANDLE
3. REMOVE RECLINING PEDAL COVER
4. REMOVE NO. 2 REAR SEAT RECLINING COVER
(a) Remove the screw.
(b) Remove the No. 2 rear seat reclining cover as shown in
the illustration.
(c) Employ the same manner described above to the other
side.
5. REMOVE SEATBACK ASSEMBLY
Remove the 4 bolts and seatback assembly.
Torque: 43 N´m (440 kgf´cm, 32 ft´lbf)
6. REMOVE SEATBACK COVER
(a) Remove the seatback cover with pad from the seatback
frame.
(b) Remove the seatback cover from the seatback pad.
7. REMOVE NO. 2 SEAT RECLINING ADJUSTER
Remove the 4 nuts, 2 No. 2 seat reclining adjusters and reclin-
ing connecting pipe.
8. REMOVE NO. 2 SEAT LEG COVERS
9. REMOVE RECLINING REMOVE CONTROL LEVER
10. REMOVE SEAT TRACK HANDLE
11. REMOVE REAR SEAT CUSHION UNDER COVER
12. REMOVE SEAT CUSHION ASSEMBLY
Remove the 4 screws and seat cushion assembly
Torque: 19 N´m (195 kgf´cm, 14 ft´lbf)
13. REMOVE SEAT CUSHION COVER
(a) Remove the rear No. 2 seat inner belt.
Torque: 42 N´m (430 kgf´cm, 31 ft´lbf)
(b) Remove the seat cushion cover with pad from the seat
cushion frame.
(c) Remove the seat cushion cover from the seat cushion
pad.
Page 3720 of 4323
BO47O±02
H16779
Adjustable AnchorCenter Pillar Garnish
Assist Grip
No. 2 Assist Grip Plug
Rear Door Opening
Trim Weatherstrip
Front Door
Opening Trim
WeatherstripRear Door Scuff Plate
Front Seat
Outer Belt Lower Center
Pillar Garnish
Front Door
Scuff Plate
Front Seat
Inner Belt
Front Seat
Inner Belt
Power seat adjuster type:
42 (430, 31)
42 (430, 31)
42 (430, 31)
42 (430, 31)
42 (430, 31)
42 (430, 31)
42 (430, 31)
42 (430, 31)
N´m (kgf´cm, ft´lbf) : Specified torque
42 (430, 31)
± BODYSEAT BELT
BO±159
3712 Author: Date:
2005 SEQUOIA (RM1146U)
SEAT BELT
COMPONENTS
Page 3721 of 4323
H16780
42 (430, 31)
No. 2 Rear Window
Side Garnish
Rear Trim
Rear No. 1 Seat
Outer BeltRear Seat Shoulder
Belt Cover Rear Window
Side Garnish Adjustable Anchor
Rear Door
Opening Trim
Weatherstrip
Rear Door
Scuff PlateRear No. 2 Seat
Outer Belt
Rear Seat
Shoulder
Belt Guide
Rear
Outer BeltRear No. 2 Inner BeltChild Comfort Guide
Rear Seat LockDome Light
Lens
Rear Trim Cover
Rear Floor Mat
Support Plate Rear No. 2 Seat
Outer Center Belt
Quarter Trim
Panel
Rear No. 1
Inner Belt
42 (430, 31)
42 (430, 31)
42 (430, 31)
42 (430, 31)
8.5 (87, 76 in.´lbf)
8.5 (87, 76 in.´lbf)
N´m (kgf´cm, ft´lbf) : Specified torque
42 (430, 31)
42 (430, 31)
42 (430, 31)
Front
42 (430, 31)
42 (430, 31)
42 (430, 31)
42 (430, 31)
42 (430, 31)
42 (430, 31)
42 (430, 31)
BO±160
± BODYSEAT BELT
3713 Author: Date:
2005 SEQUOIA (RM1146U)
Page 3733 of 4323

BO47U±03
H20749
BO±172
± BODYSEAT BELT PRETENSIONER
3725 Author: Date:
2005 SEQUOIA (RM1146U)
INSTALLATION
NOTICE:
Never use seat belt pretensioner from another ve-
hicle. When replacing parts, replace them with new
parts.
Make sure that the front seat outer belt is installed to
the specified torque.
If the front seat outer belt has been dropped, or there
are cracks, dents or other defects in the case or con-
nector, replace the front seat outer belt with a new
one.
When installing the front seat outer belt, take care that
the wiring does not interfere with other parts and is
not pinched between other parts.
1. Other front seat outer belts:
INSTALL RETRACTOR OF FRONT SEAT OUTER BELT
(a) Install the retractor of front seat outer belt with the 2 bolts.
Torque: 42 N´m (430 kgf´cm, 31 ft´lbf)
(b) Connect the pretensioner connector as shown in the il-
lustration.
2. INSTALL LOWER CENTER PILLAR GARNISH
(a) Install the lower center pillar garnish.
(b) Install the front seat outer belt floor anchor.
Torque: 42 N´m (430 kgf´cm, 31 ft´lbf)
3. INSTALL REAR DOOR OPENING TRIM WEATH-
ERSTRIP
4. INSTALL REAR DOOR SCUFF PLATE
5. INSTALL FRONT DOOR OPENING TRIM WEATH-
ERSTRIP
6. INSTALL FRONT DOOR SCUFF PLATE
7. CONNECT CABLE TO NEGATIVE BATTERY TERMI-
NAL
8. PERFORM INITIALIZATION (See page IN±20)
Some systems need initialization when disconnecting the cable
from the negative battery terminal.
Page 3734 of 4323
BO47V±04
H16752
Center Leg Cover
Front Leg
Front Leg CushionNo. 1 Roof Inner Rack
Bracket Center SupportRoof Inner Rack Retainer
Weatherstrip
Front Leg Cover
Front Leg
Front Leg Cushion Front Leg CoverRear Leg CoverFront StayRoof Rack Bar Joint
Center Support
Sub±assemblyRoof Inner
Rack Retainer
Rear Leg Cover
Rear Leg
Rear Leg Cover
Center Leg Cover
Rear Leg
Rear Leg Cushion
11 (115, 8)
N´m (kgf´cm, ft´lbf) : Specified torque
11 (115, 8)
11 (115, 8)
11 (115, 8)
11 (115, 8)
11 (115, 8)
± BODYROOF RACK
BO±173
3726 Author: Date:
2005 SEQUOIA (RM1146U)
ROOF RACK
COMPONENTS
Page 3735 of 4323
BO47W±01
H16756
Service Hole Plug
Rear Trim Rear Spoiler
Service Hole PlugHigh Mounted
Stop Light
N´m (kgf´cm, ft´lbf) : Specified torque
12 (120, 8)
12 (120, 8)
12 (120, 8)
12 (120, 8)
BO±174
± BODYSPOILER
3727 Author: Date:
2005 SEQUOIA (RM1146U)
SPOILER
COMPONENTS
Page 3756 of 4323
AC3GU±02
I21436
Suction Tube
Suction Hose
5.4 (55, 48 in.´lbf)
Liquid Tube
N´m (kgf´cm, ft´lbf) : Specified torque Single A/C:
Discharge Hose
Liquid Tube
Liquid
Tube
Dual A/C:
Front Side:
Suction Tube
Suction Hose
Discharge Hose
Liquid
Tube
5.4 (55, 48 in.´lbf)
5.4 (55, 48 in.´lbf)
5.4 (55, 48 in.´lbf)
10 (100, 7)
5.4 (55, 48 in.´lbf)
5.4 (55, 48 in.´lbf)
10 (100, 7)
± AIR CONDITIONINGREFRIGERANT LINE
AC±21
3748 Author: Date:
2005 SEQUOIA (RM1146U)
LOCATION
Page 3757 of 4323
I21437
Dual A/C:
Rear Side:
Liquid Tube
Suction Tube
5.4 (55, 48)
N´m (kgf´cm, in.´lbf) : Specified torque
AC±22
± AIR CONDITIONINGREFRIGERANT LINE
3749 Author: Date:
2005 SEQUOIA (RM1146U)