2000 TOYOTA CAMRY window

INSTALLATION
Body Sealer
Braze
(Both sides)
[Foamed Material
Application Areas]
1. Before temporarily installing the new parts,
apply body sealer to the windshield header
panel, roof panel reinforcement and back
window frame.
HINT: Apply just enough sealer for the new parts
to make contact.
2. Braze the quarter panel connection.
HINT: Before performing these operations, place
a wet rag on the roof panel to protect it from dam-
age.
BODY PANEL REPLACEMENTRE-67

INSTALLATION
Body Sealer
Braze
(Both sides)
[Foamed Material
Application Areas]
1. Before temporarily installing the new parts,
apply body sealer to the windshield header
panel, roof paneI reinforcement and back
window frame.
HINT: Apply just enough sealer for the new parts
to make contact.
2. Braze the quarter panel connection.
HINT: Before performing these operations, place
a wet rag on the roof panel to protect it from dam-
age.
BODY PANEL REPLACEMENTRE-69

CAMRY ± OUTLINE OF NEW FEATURES
CAMRY
2
OUTLINE OF NEW FEATURES
The Camry is a high-quality family sedan with advanced technology and sporty performance. The following
changes are made for the 1998 model year.
1. Model Line-Up
The SXV20L-AEPNKK and MCV20L-A (C) EPGKK models have been added.
The MCV20L-CEPNKK model has been discontinued.
2. Interior Equipment
An extensible assist grip has been newly provided for the front passenger.
3. 5S-FE Engine
ORVR (On-Board Refueling Vapor Recovery) System has been adopted.
4. 1MZ-FE Engine
The 1MZ-FE engine with automatic transaxle on the California specification model uses the air-fuel ratio
sensor and the WU-TWC (Warm Up-Three-Way Catalytic Converters) to reduce exhaust emissions.
5. Body
The cross section shape of the outside windshield moulding has been changed to reduce the wind noise.
The front door window glass has been increased in thickness to reduce the amount of noise transmitted
from the outside of the vehicle.
Front seat belt with pretensioner and force limiter has been adopted.
6. Engine Immobiliser System
An engine immobiliser system has been newly provided to help improve the vehicle's theft prevention perfor-
mance.
7. Theft Deterrent System
The starter cutoff function has been discontinued along with the adoption of the engine immobiliser sys-
tem.
The illumination pattern of the indicator light which indicates the condition of the system has been
changed.

CAMRY ± NEW FEATURES
BATT
BATTERY
PS
IMLD
EGR
EVP1
TPC
W
ELS
STP
PTNK
TRC
TXCT
KSW
TC
SIL
EFI MAIN RELAY
+B
EFI ELS2 POWER STEERING OIL
PRESSURE SWITCH
TAILLIGHT & REAR WINDOW
DEFOGGER
STOP LIGHT SWITCH
VAPOR PRESSURE SENSOR
ABS & TRAC ECU*
1
TRANSPONDER KEY
AMPLIFIER*2
UNLOCK WARNING SWITCH*2
DATALINK CONNECTOR 1
DATALINK CONNECTOR 3EGR CONTROL
VSV
EVAP CONTROL
VSV
VAPOR PRESSURE CONTROL
VSV
THEFT DETERRENT INDICATOR
LIGHT*2
MALFUNCTION INDICATOR
LAMP
HTSOXYGEN SENSOR HEATER
CONTROL
HEATED OXYGEN SENSOR
HEATER (Bank 1, Sensor 2)
RXCK
CODE
12
*1: Applicable only to vehicles equipped with the TRAC System.
*
2: Applicable only to vehicles equipped with the Engine Immobiliser System.

CAMRY ± NEW FEATURES
150NF103 150NF102'98 Camry '97 Camry
A ± A' Cross Section
150IN101
Windshield
GlassWindshield
Moulding
Windshield
GlassWindshield
Moulding AA' 14
BODY
1. Low Vibration Low Noise Body
The front door window glass has been increased in thickness from 4.0mm (0.16 in.) to 5.0mm (0.20 in.)
to reduce the amount of noise transmitted from the outside of the vehicle.
The cross section shape of the outside windshield moulding has been changed to direct the airflow smooth-
ly from the front to the side of the vehicle. As a result, the wind noise has been reduced.

'99camry U
2
Instrument panel overview
1. Rear view mirror remote control levers
2. Side defroster outlets
3. Side vents
4. Instrument cluster
5. Center vents
6. Glove box
7. Electric moon roof switch and
personal light
8. Garage door opener box or
miscellaneous box
9. Power door lock switches
10. Power window switches
11. Cup holders
12. Cup holder or rear ashtray
13. Parking brake lever
14. Automatic transmission selector lever
or manual transmission gear shift lever
15. Auxiliary box
16. Hood lock release lever

'99camry U
3
1. Power rear view mirror control switch
2. Headlight and turn signal switch
3. Wiper and washer switches
4. Clock
5. Emergency flasher switch
6. Car audio
7. Rear window and outside rear view
mirror defoggers switch
8. Air conditioning controls
9. Front ashtray
10. Power outlet
11. Cigarette lighter
12. Ignition switch
13. Cruise control switch
14. Tilt steering lock release lever
15. Traction control system off switch
16. Instrument panel light control knob

'99camry U
7
Part 1
OPERATION OF
INSTRUMENTS AND
CONTROLSÐ
Chapter 1±2
Keys and Doors

Keys

Engine immobiliser system

Side doors

Power windows

Trunk lid

Hood

Theft deterrent system

Fuel tank cap

Electric moon roof
Your vehicle is supplied with two kinds
of key.
1. Master keyÐThis key works in every
lock.
2. Sub keyÐThis key will not work in the
glove box and trunk.
To protect things locked in the glove box
or trunk when you have your vehicle
parked, leave the sub key with the atten-
dant.
Since the doors and trunk lid can be
locked without a key, you should always
carry a spare master key in case you
accidentally lock your keys inside the ve-
hicle.KEY NUMBER PLATE
Your key number is shown on the plate.
Keep the plate in a safe place such as
your wallet, not in the vehicle.
If you should lose your keys or if you
need additional keys, duplicates can be
made by a Toyota dealer using the key
number.
We recommend you to write down the key
number and keep it in safe place.
Keys (without engine
immobiliser system)