1998 NISSAN GT-R Service Manual

SERVICEMANUAL

NISSAN
MODEL R34 SERIES
FOREWORD
This Sewice Manual contains infor-
mation concerning necessary ser-
vice procedures and relevant data
for the model
R34 series.
All information, illustrations and
specifications contained in this Ser-
vice Manual are based on the latest
product information available at the
time of publication. If your NISSAN
model differs from the specifications
contained in this
Sewice Manual,
consult your NISSAN distributor for
information.
The right is resewed to make
changes in specifications and meth-
ods at any time without notice.
QUICK REFERENCE INDEX I
0 1998 KISSAN MOTOR CO., LTD. Printed in Japan
A11 rights reserved. No part of this Service Manual may be reproduced or stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of Nissan Motor Company Ltd.. Tokyo, Japan.

HOW TO USE THIS MANUAL
b This Service Manual only contains the service data specifications and trouble diagnosis informa-
tion such as self-diagnosis,
CONSULT, circuit diagram and so on.
b For other information not specified in this manual, refer to Japanese version Service Manual (Pub.
No. A006029) and wiring diagram manual (Pub. No.
WD8EOR34JO).
IMPORTANT SAFETY NOTICE
The proper performance of service is essential for both the safety of the technician and the efficient
functioning of the vehicle.
The service methods in this Service Manual are described in such a manner that the service may be
performed safely and accurately.
Service varies with the procedures used, the skills of the technician and the tools and parts available.
Accordingly, anyone using service procedures,
took or parts which are not specifically recommended
by
NISSAN must first be completely satisfied that neither personal safety nor the vehicle's safety will
be jeopardized by the service method selected.

GENERAL INFORMATION
SECTION
GI
CONTENTS
CONSULT CHECKING SYSTEM .................................... 2 IDENTIFICATION INFORMATION ................................... 3
Function and System Application ................................ 2 Model Variation ............................................................ 3
Lithium Battery Replacement ..................................... .2 Vehicle Identification Number ...................................... 4
.................................................... Checking Equipment 2 Vehicle Identification Plate ........................................... 4

CONSULT CHECKING SYSTEM
Function and System Application
Diagnostic test mode
Work support
Self-diagnostic results
Trouble diagnostic record Function
This mode enables a technician to adjust some devices faster
and more accurately by following the indications on CONSULT.
ECU discriminated
No.
Data monitor
I I whether each system is "OK" or 'NG". lxH-1-
Conducted by CONSULT instead of a technician to determine
Function test Self-diagnostic
results can be read and erased quickly.
Current self-diagnostic results and all trouble diagnostic records
previously stored can be read.
Active test
ECM part number
L x: Applicable ENGINE
x
Classification
number of a replacement ECU can be read to pre-
vent an incorrect ECU from being installed.
InputIOutput data in the ECM can be read.
Lithium Battery Replacement
x
Diagnostic Test Mode in which CONSULT drives some actuators
apart from the
ECMs and also shifts some parameters
in a
specified range.
ECM part number can be read.
CONSULT contains a lithium battery. When replacing the battery obey the following:
WARNING:
Replace the lithium battery with SANYO Electric Co., Ltd.,
CR2032 only. Use of another battery may
present
a risk of fire or explosion. The battery may present a fire or chemical burn hazard if mistreated.
Do not recharge, disassemble or dispose of in fire.
Keep the battery out of reach of children and discard used battery conforming to the local regulations.
AfT
-
-
x
Checking Equipment
x
-
x
x
When ordering the below equipment, contact your NlSSAN distributor. Air
bag
-
-
-
x
!
Tool name ABS
-
x
X
-
x
NISSAN CONSULT
@ CONSULT unit
and accessories
@ Program card
UE990: For Automatic
transmission of
Dual
rnatic M-ATx
EE980: Except for Auto-
matic transmission
of Dual
matic
M-Atx
x
-
--
X
-
Description
-
x
-
-
x
x

IDENTIFICATION INFORMATION
Model Variation
Model
Body Grade Engine Transmission Rear differential carrier
RH drive
GGKBRTFR34UDA FS5R30A
2-door 25GT TURBO
RB25DET
. R200V
GGKBRTAR34UDA
RE4RO1
B
RB20DE
GGHAREARMEDA
1 GGKAREFRMEDA 1 RB25DE
GGKAREARMEDA
GGKBRTFRMUDA
25GT TURBO
RB25DET R200V
GGKBRTARMUDA
RE4RO1 B
BGHAREFR34EDA FS5W71 C
20GT
RB20DE
BGHAREARMEDA RE4RO1 B R200
i%
I
BGKBRTFR34UDA FS5R30A $#i 25GT TURBO RB25DET
R200V
BGKBRTAR34UDA RE4RO1 B
Prefix and suffix designations:
A: Standard
- 1 TEG, TDestlon' U: intercooler turbocharger
Model
F:
&speed
manual transmission
A: 4-speed automatic transmission
20GT,
25GT,
25GT-X T: 25GT TURBO
k: Right-hand drive
2WD B: 2WD
+ ELECTRIC SUPER HlCAS
GH:
RB20DE
GK:
RB25DE, RB25DET
4-door Sedan G: 2-door Coupe

IDENTIFICATION INFORMATION
-2 L .I Vehicle identification plate Vehicle Identification Number
The stamping position for vehicle identification number is at the
right side of cowl top panel.
GF-HR34: From HR34-000001
GF-ER34:
From ER34-000001
GF-ENR34:
From ENR34-000001
--
Vehicle Identification Plate
-- -
NISSAN MOTOR CO,LTD.JAPAN
CHASSlS NO YO DE CHASSIS A MOOEL WDELO A n7- me4 W I
~YLCOLOAWUIWQW( AA 0
z; ENGINE QA cc 2; Mom 2 I ;mi TRANS AXLE T77.b TRANS EJE A& PLANT
nrwrr
A TYP~ A Chassis No.
A Model
A ~ody color
A Inner trim color
A Engine type
Displacement
A Transmission type
A Transaxle type

ENGINE CONTROL SYSTEM
SECTION EC
CONTENTS
ENGINE AND EMISSION CONTROL OVERALL
SYSTEM..
....................................................................... \
..2
System Description ...................................................... 2
Description of Engine Control ...................................... 2
System Diagram
.......................................................... 3
Component Parts Location .......................................... 6
Vacuum Hose Drawing ................................................ 8
Circuit Diagram
........................................................ 11
.................................... ECM (.EM) Terminal Layout 13
TROUBLE DIAGNOSES ............................................... 15
Fail-safe and Backup Functions 15 RS ...............................
Self-diagnosis .......................................................... 16
CONSULT .................................................................. I9 MA ............................................... Symptom Matrix Chart 28
Idle Speed Inspection and Adjustment
..................... ;35
................ Ignition Timing Inspection and Adjustment 36
AirIFuel Ratio Inspection ........................................... 37
Fuel Pressure Inspection ........................................... 38
ECM (.TCM) InpuVOutput Signal Reference 9D
........................................................................\
. Value .39