REMOTE CONTROL ENTRY SYSTEM
Remote Control Entry Control Unit
Terminal No.
InputIOutput Signal specifications
Signal name Operation or cond~t~on Specificatton
Close the driver door. (OFF) Approx.
12V Driver door
switch input signal . @ Open the driver door. (ON) Approx. OV
Close
all the doors. (OFF) Approx. 12V All door
switch input signal Ec Open one of the doors. (ON) Approx. OV
Driver door
lock actuator lock
output signal Lock with the remote control. Changes from
approx. 0 to 12V and back to approx. OV. t
Ground - Approx. OV BR Locked (OFF) Approx. 5V Driver door lock switch signal
Unlocked (ON) Approx. OV
Key-in detection switch input Insert (ON) Approx. 12V 87
signal
Ignition key Remove (OFF)
Approx. OV
ACC power supply Ignition switch to ACC Approx. 12V Rs
Passenger door and rear RH & Press the lock switch on the remote control. Changes
from approx. 5 to OV LH door lock output signal
and back to approx. 5V.
Passenger door and rear RH & Changes from approx. 5 to OV HA
LH door unlock output signal Press the unlock switch
on the remote control.
and back to approx. 5V.
Driver door lock actuator
Unlock with the remote control. Changes from approx. 0 to
unlock output signal 12V and back to approx. OV.
System Check
Easy way to confirm the func+ion of the remote control: Works
properly.
Program the remote control (A) to another vehicle
of the
same type and check if the remote control works properly. Does not work. is OK.
Turn
a radio ON. Touch the radio aerial with the remote
control (A). Press a switch on the remote control with . is heard.
the
remote
control on the aerial. Listen for noise.
(Radio frequency: around
78.6, 78.7, 78.8 MHz)
B f ' Works properly.
I
Program another remote control (6) to the vehicle
concerned and check if the remote control works properly. No noise
is heard. t The vehicle is OK.
Does not work.
Check item
Operation check
Remote control
(A) is OK. Remote control (A)
is
NG.
r The vehicle is NG. 0CC3078D
I
I System check A
Remote control
(A) is OK.
Remote control (A) is
NG.
System check B
The vehicle is OK.
Remote control (A) is NG. Program the remote control
(A) to the vehicle concerned again and check
for proper operation.
The vehicle is NG.
The vehicle is OK. Perform trouble diagnosis
to determine what causes the problem.
Check the remote control
(A) battery voltage.
The vehicle is NG. Check the
remote control (A) battery voltage and then perform trouble
diag- nosis to determine what causes the problem.
