1997 TOYOTA CELICA Owners Manual

195
3. Install a new bulb and the connec-
tor into the mounting hole.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.1. Loosen the retainer screw and take
out the beam unit.2. Turn the cover counterclockwise
and remove it.
ÐFront fog lights
ProCarManuals.com

196
3. Disconnect the cords.4. Release the bulb retaining spring
and remove the bulb. Install a new
bulb and the bulb retaining spring.
To install the bulb, align the cutouts of the
bulb with the protrusions of the mounting
hole.5. Connect the cords, install the cover
and turn it clockwise so that two
triangle marks are aligned. Plug the
connector together. Install the beam
unit and tighten the screw.
ProCarManuals.com

197
Use a Phillips-head screwdriver.Use a Phillips-head screwdriver.
ÐParking and front turn
signal lights ÐFront side marker lights
ProCarManuals.com

198
a: Rear turn signal light c: Stop and tail light
b: Rear side marker, d: Back-up light
stop and tail light
ÐRear side marker, rear turn
signal, stop and tail, and back-up
lights (coupe and convertible)
ProCarManuals.com

199
a: Rear side marker light c: Stop and tail light
b: Rear turn signal light d: Back-up light
Use a Phillips-head screwdriver.
ÐRear side marker, rear turn
signal, stop and tail, and
back-up lights (liftback)ÐLicense plate lights
ProCarManuals.com

200
ÐHigh mounted stoplight
(coupe)ÐHigh mounted stoplight
(liftback)
ProCarManuals.com

201ProCarManuals.com

202ProCarManuals.com