1997 RENAULT KANGOO Sheet Metal Work Workshop Manual

LOWER STRUCTURE
Front half unit
41D
12894R113010R4
CAA11538R8
C
1
2
CAN11689R3
D
3
4
41-15

LOWER STRUCTURE
Front half unit
41D
13005R4
CAB11539R3
E
4
3
CAA11536-4R2
F
43
CAS13029-4R1
G
4 5
3
41-16

LOWER STRUCTURE
Front side cross member
41E
PRB4125
INTRODUCTION
The replacement of this part is a complementary
operation to the replacement of a front pillar or a
sill panel with a lining for a side impact.
In the operation described below there are only
descriptions of the joints specific to the part
concerned.
Information concerning the other parts will be
dealt with in the respective sections.
The repair bench must be used.
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
Part assembled with jack support.
JOINTS WITH:
Bulkhead
Floor
Windscreen wiper motor mounting
Rear side member, front section
Rear side member, rear section
Sill panel closure panel
Sill panel reinforcement
Sill panel
Front sub-frame rear mounting
PARTS CONCERNED (thickness in mm) :
1Front side cross member 1
2Bulkhead 1
3Floor 1
4Windscreen wiper motor mounting 1.5
5Front side member, rear section 1.8
6Front side member
reinforcement, rear section 2.5
7Sill panel closure panel 1.2
8Sill panel reinforcement 0.7
9Sill panel 1
10Front sub-frame rear mounting 2.5
41-17

LOWER STRUCTURE
Front side cross member
41E
12893R2
CAT13321-2R3
A
1 2
CAG11548-2R8
B
5
1 3
CAF11547-2R1
C5
1 6
3
41-18

LOWER STRUCTURE
Front side cross member
41E
12904R
CAA11538R5
D
1 7
CAS13024-1R5
E
1 5
CAM11557-5R6
F
10 5
CAT13329-1R8
G
17
CAE11546-2R8
H
1 7 88 9
61 6
41-19

LOWER STRUCTURE
Front side cross member
41
13020R
E
CAA11538R5
I
1 3
CAA11538-2AR8
J
1
7
1
21
2
41-20

LOWER STRUCTURE
Front side member, rear section
41F
PRB4126
INTRODUCTION
The replacement of this part is a complementary
operation to the replacement of the front half
unit.
In the operation described below, there are only
descriptions of the joints specific to the part
concerned.
Information concerning the other parts will be
dealt with in the respective sections.
The repair bench must be used.
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
Part assembled with :
- sub-frame front mounting,
- front side cross member,
- side member reinforcement.
JOINTS WITH:
Bulkhead
Floor
Sill panel closure panel
PARTS CONCERNED (thickness in mm):
1Bulkhead 1
2Floor 1
3Front side member, rear section 1.8
4Sill panel closure panel 1.2
5Sill panel reinforcement 0.7
6Sill panel 1
7Side member closure panel
reinforcement 2.5
8Front side cross member 1
41-21

LOWER STRUCTURE
Front side member, rear section
41F
12898R1
CAD11545R3
A
1
2
3
CAT13324R1
B
7 2
3
CAA11538R5
C
4
8
41-22