UPPER FRONT STRUCTURE
Front wing
INTRODUCTION
The replacement of this part is a basic operation for a frontal impact.
It is a removable bodywork component.
COMPOSITION OF THE PART FROM THE PARTS DEPARTMENT
Part assembled with:
- mudguard skirt,
- bumper mounting support .
42A
13330R
Remove :
- the plastic cover at (A) on the wing side (see section 55),
- the wheel arch plastic mudguards (see section 55),
- the bumper and its mounting blade (see section 55),
- the indicator repeater,
- the front wing : 8 hexagonal-head bolts Ø 6 mm and a torx bolt Ø 6 mm.
42-1
