SIDE OPENING ELEMENTS
Front door
REMOVAL
47A
PRB4706
13021R
Disconnect the connection of the door wiring by
pushing the clip upwards.
Remove the door handle bolt (A).
13021R1
Remove the door hinge pins using tool Car. 1415
Parts Department number 00 00 141 500 (opera-
tion must be carried out by two people).
REFITTING
Refit in the opposite way to the to removal and
refer to the section on opening clearances, to
make any adjustments.
47-1
NON-SIDE OPENING ELEMENTS
Tailgate
48D
13474R
REFITTING
Refit in the opposite way to removal and refer to
section 40 (opening clearances) to make correct
adjustments.
ADJUSTMENT
Height and tilt adjustment are made by fitting
shims under the mounting bolts (A).
Clearance adjustment is carried out by adjusting
the play of the same bolts in their mounting holes.
REMOVAL
PRB4811
After removal of trim and wiring, remove the ba-
lancers then the mounting bolts (A) from the roof
rear cross member (this operation should be car-
ried out with two people).
48-4
