1997 RENAULT KANGOO Sheet Metal Work Workshop Manual

UPPER FRONT STRUCTURE
Windscreen aperture lower cross member
42H
13014R1
CAB11539-1R5
A
1 2
or
CAB11539R3
B
6 2
CAF11547-2R7
C
62 7
42-29

UPPER FRONT STRUCTURE
Windscreen aperture lower cross member
42H
13224R
CAA11538R8
D
6
2
CAS13030R6
E
2
1 3
CAF11547-4R1
F1
4 2
42-30

UPPER FRONT STRUCTURE
Windscreen aperture lower cross member
42H
13014R2
CAA11536-3R1
G
1
5
CAS13025R3
H
2
3or
CAB11539-1R5
I
1 2 1
42-31

UPPER FRONT STRUCTURE
Steering column mounting
42I
PRB4216
INTRODUCTION
The replacement of this part is a complementary
operation to the replacement of the windscreen
aperture lower cross member.
In the following operation there are only descrip-
tions of the joints specific to the part concerned.
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
Steering mounting:
Part only.
JOINTS WITH :
Steering column mounting
Steering column mounting height adjuster
Bulkhead
PARTS CONCERNED (thickness in mm) :
1Steering column mounting 2
2Steering column mounting height
adjuster 1.5
3Bulkhead 1
42-32

UPPER FRONT STRUCTURE
Steering column mounting
42I
13224R1
CAA11538-1R8
A
1
2
CAA11536R7
B
1
2
CAA11536-3R1
C
1 3
42-33

UPPER FRONT STRUCTURE
Bulkhead
42J
PRB4217
INTRODUCTION
The replacement of this part is a complementary
operation to the replacement of :
1 - for a frontal impact :
- the wheel arch with the cowl side panel,
- the plenum chamber ,
2 - for a side impact:
- the front pillar with lining,
- the windscreen aperture lower cross mem-
ber,
- the plenum chamber .
This part may be partially replaced (see diagram
and method below).
In the following operation there are only descrip-
tions of the joints specific to the part concerned.
Information concerning other parts is dealt with
in the respective section.
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
Part assembled with :
- windscreen wiper mounting,
- windscreen wiper mounting reinforcement.
JOINTS WITH :
Floor
Windscreen wiper mounting
Windscreen wiper motor mounting
Windscreen pillar
Windscreen pillar lining
Front side cross member
PARTS CONCERNED (thickness in mm) :
1Bulkhead 0.7
2Floor 0.8
3Windscreen wiper motor mounting 1.5
4Windscreen pillar 1
5Windscreen pillar lining 1
6Rear side member, front section 2.5
7Front side cross member 1
8Front pillar 0.8
or
42-34

UPPER FRONT STRUCTURE
Bulkhead
42J
12893R1
CAG11548-1R8
A
1
2 7
CAA11536-1R8
B
1
2
CAS13031R7
C
1
2 6
42-35

UPPER FRONT STRUCTURE
Bulkhead
42J
13003R
or
CAA11536-2R4
D
1
2
CAD11545-3R2
E
12
1
CAA11536-2R1
F
1
1
or
42-36