1997 FORD F250 Owners Manual

Page 121 of 377

FORD F250 1997  Owners Manual 121
*
[SS26100(F )01/96]
RWARNING
Do not install a child seat in a center
facing jump seat.
*
[SS26200(F )01/96]
RWARNING
Safety belts and seats can become hot in a
vehicle that has been closed up in

Page 122 of 377

FORD F250 1997  Owners Manual 122 [SS26800(F )04/96]
RWARNING
If the shoulder belt cannot be properly
positioned, move the child to one of the
seats with a lap belt only (preferably in a
rear seat) and use the lap belt.
*
[SS26900

Page 123 of 377

FORD F250 1997  Owners Manual 123
*
[SS28400(F )03/96]
RWARNING
If you do not properly secure the safety
seat, the child occupying the seat may be
injured during a collision or sudden stop.
An unsecured safety seat could also inju

Page 124 of 377

FORD F250 1997  Owners Manual 124 [SS28800(F )01/96]
half page art:0021377-B
*
[SS28900(F )01/96]
Installing Child Safety Seats
[SS29000(F )01/96]
Your vehicle is equipped with a dual locking
mode retractor on the shoulder belt po

Page 125 of 377

FORD F250 1997  Owners Manual 125
*
[SS29400(F )01/96]
For seating positions equipped with a
dual-locking mode retractor, use the following
procedure:
*
[SS29800(F )05/96]
1. Position the child seat in the center of the
passenger

Page 126 of 377

FORD F250 1997  Owners Manual 126
*
[SS30100(F )01/96]
3. While holding the shoulder and lap belt
portions together, route the tongue through
the child seat according to the child seat
manufacturers instructions. See Figure 2. Be

Page 127 of 377

FORD F250 1997  Owners Manual 127
*
[SS30300(F )01/96]
4. Insert the belt tongue into the buckle for that
seating position until you hear and feel the
latch engage. See Figure 3. Make sure tongue
is latched securely to buckle by p

Page 128 of 377

FORD F250 1997  Owners Manual 128
*
[SS30500(F )01/96]
5. Grasp the shoulder portion of the belt and
pull downward until all of the belt is
extracted and a click is heard. At this time,
the retractor is in the automatic locking
mo