1996 TOYOTA TERCEL door lock

BO33P-01
H04285
BO1474
BO-24
- BODYLUGGAGE COMPARTMENT DOOR
1996 TERCEL (RM440U)
ADJUSTMENT
1. ADJUST LUGGAGE COMPARTMENT DOOR
(a) For forward/rearward and left/right adjustments, loosen
the bolts.
(b) For vertical adjustment of front end of door, increase or
decrease the number of washers.
2. ADJUST LOCK AND STRIKER
Loosen the mounting bolts to adjust the lock and striker.

BO342-01
Z16117
: 4 Clips
Z16118
: 2 Clips
: 5 Clips
N12584
N12581
N12585
- BODYQUARTER WINDOW GLASS
BO-39
1996 TERCEL (RM440U)
REMOVAL
1. REMOVE REAR SEAT CUSHION
2. REMOVE REAR SEATBACK
3. REMOVE FRONT SEAT OUTER BELT
4. REMOVE PACKAGE TRAY TRIM SIDE COVER
5. REMOVE REAR SEAT OUTER BELT
6. REMOVE QUARTER TRIM BOARD
7. REMOVE FRONT DOOR SCUFF PLATE
8. REMOVE ROOF SIDE INNER GARNISH
9. REMOVE QUARTER WINDOW GLASS
(a) Push piano wire through between body and glass from
the interior.
(b) Tie both wire ends to wooden blocks or similar object.
HINT:
Apply adhesive tape to the outer surface to keep the surface
from being scratched.
NOTICE:
When separating the glass, take care not to damage the
paint and exterior.
(c) Cut the adhesive by pulling the piano wire around it.
HINT:
Cut the adhesive areas as shown in the illustration, leaving the
adhesive where the pins are.
(d) Using piano wire, as shown in the illustration, cut off the
rest of the adhesive.
(e) Remove the glass.
NOTICE:
Leave as much of the adhesive on the body as possible
when cutting off the glass.

BO1IC-04
N15778
No.2 Heater to
Register Duct
Center Heater to
Register Duct
Instrument Panel Reinforcement
AG
AA
G
G
G
G
G
G
A
A Instrument Panel
Brace No.1
Instrument Panel
Brace No.2
Clock Hole Cover
C
CInstrument Panel
Heater
Control
B
B
B
B
DDD
Lower Center Finish Panel
Center Upper
Cluster Finish Panel
Combination
Mater
Steering Column Cover
Front Pillar Garnish
Combination Switch
Cowl Side
Trim
Front Door
Scuff Plate
Instrument Panel
Lower Pad
Lower Center Finish Panel
Steering Wheel
Center Cluster
Finish Panel
Shifting Hole
Bezel
F
F
Ash Receptacle BoxD
D
D
D
Console Box
Lower Instrument Cover
BB
BBHeater Control Panel
Knob
- BODYINSTRUMENT PANEL
BO-45
1139 Author
: Date
:
1996 TERCEL (RM440U)
INSTRUMENT PANEL
COMPONENTS

BO347-01
N12292
N12291
N12055
BO-48
- BODYINSTRUMENT PANEL
1996 TERCEL (RM440U)
REMOVAL
1. REMOVE FRONT PILLAR GARNISHES
2. REMOVE COWL SIDE TRIMS
3. REMOVE FRONT DOOR SCUFF PLATES
4. REMOVE STEERING WHEEL (See page SR-13)
5. REMOVE LOWER INSTRUMENT COVER
(a) Remove the 2 screws and the hood lock release lever.
(b) Remove the 2 hole covers.
(c) Remove the 4 bolts and the lower cover.
6. REMOVE INSTRUMENT PANEL LOWER PAD
7. REMOVE CENTER UPPER CLUSTER FINISH PANEL
8. REMOVE STEERING COLUMN COVERS
9. REMOVE COMBINATION SWITCH
10. REMOVE COMBINATION METER
11. REMOVE LOWER CENTER FINISH PANEL
(a) Remove the 4 bolts and 3 screws.
(b) Remove the instrument finish panel by pulling.
12. DISCONNECT FRONT PASSENGER AIRBAG CON-
NECTOR (See page RS-21)
13. REMOVE SHIFTING HOLE BEZEL
14. REMOVE CONSOLE BOX
15. REMOVE LOWER CENTER FINISH PANEL
16. REMOVE CENTER CLUSTER FINISH PANEL
17. REMOVE ASH RECEPTACLE BOX
18. REMOVE RADIO ASSEMBLY
19. REMOVE HEATER CONTROL PANEL (See page
AC-70)
20. REMOVE JUNCTION BLOCK NO. 1
Remove the 3 screws and J/B No. 1.