Page 105 of 398
Downloaded from www.Manualslib.com manuals search engine i r
r
To set’ the parking brake: . .~ . ... I. . . ,-
Hold th,e regular brake pedal down with your right foot. Push down the
parking brake pedal with your left foot.
If the ignition .is on, the brake
system warning light will come on.
.- ” .
r
f- i
When you move out
of “P” (Park) or “N”
,.. (Neutral), if your
: engine is running,
,. your-parking brake
.:, should go off. If it
’ . doesn’t; ,you have a
,’: parking brake
.. problem and should
h\ave it fixed. In the
: meantime, you can
still release your
parking brake.
Just pull
on the manual release lever, as shown.
!
NOTICE:
Driving with-the parking brake on can cause your rear b,rakes to
overheat.
You may have to replace them, and you could also
damage other parts of your vehicle.
93
Page 106 of 398
Downloaded from www.Manualslib.com manuals search engine If you are towinr a trailer and are parking on any hill: See “Towing a
Trailer” in the Index. That section shows what to do first to keep the
trailer from moving.
SHIFTING INTO “P9’ (PARK)
Steering Column ShijZ Lever
1. Hold the brake pedal down with your right foot.
94
Page 107 of 398
Downloaded from www.Manualslib.com manuals search engine r:
2. Move the shift lever into “P” (Park) position like this:
r.
r
0 Move the lever
up as far as it
will go.
0 Pull the lever
toward
you.
r--- 1 3. With your right foot still holding the brake.peda1 down, set the
parking brake.
4. Move the ignition key to “Lock.”
.5. Remove -the key and take it with you. If you camwalk away from your
vehicle with the-ignition key in your hand, your vehicle is in “P”
1 (Park).
i
-
95
Page 108 of 398
Downloaded from www.Manualslib.com manuals search engine Lonsole Shift Lever
1. Hold the brake pedal down with your right foot.
2. Move the shift lever into “P” (Park) position like this:
Hold in the
button on the
lever, and push
the lever all the
way toward the
front
of your
vehicle.
3. With your right foot still holding the brake pedal down, set the
parking brake.
4. Move the ignition key to “Lock.”
5. Remove the key and take it with you. If you can walk away from your
vehicle with the ignition key in your hand, your vehicle is in “P”
(Park).
-
L-
96
Page 109 of 398

Downloaded from www.Manualslib.com manuals search engine r
i-
P
i 1
P
r
i
I?
P I i. 1
_... *- .*
If you have to leave your vehicle with the engine running, be sure your
vehicle is in “PYy (Park) and your parking brake is firmly set before you
leave it. After you’ve moved the shift lever into the “P” (Park) position,
hold the regular brake pedal down. Then, see if you can move the shift
lever away
from “P” (Park) without first pulling it toward you (or, if you
have the console shift
lever, without first pushing the button). If you can,
it means that the shift lever wasn’t fully locked into “P” (Park).
SHIFTING OUT OF “P” (PARK)
Your Cadillac has a brake-transaxle shift interlock. You have to fully
& your regular brake before you can shift from “P” (Park) when the
ignition is in the “Run” position. See “Automatic Transaxle” in the Index.
If you cannot shift out of “P” (Park), ease pressure on the shift lever --
push the shift lever all the way into “P” (Park) and also release the shift
lever button on floor shift models as you maintain brake application.
Then move the shift lever into the gear you want. (Press the shift lever
button before moving the shift lever.)
If you ever hold the brake pedal
down but still can’t shift out of “PYy (Park), try this:
1.
2.
3.
4.
Turn the key to “Off.” Open and close the driver’s door to turn off the
Retained Accessory Power feature.
Apply and hold the brake until the end of Step
4.
Shift to “N” (Neutral).
Start the vehicle and then shift to the drive gear you want.
i
Page 110 of 398
Downloaded from www.Manualslib.com manuals search engine Torque Lock
If you are parking on a hill and you don’t shift your transaxle into “P”
(Park) properly, the weight
of the vehicle may put too much force on the
parking pawl in the transaxle. You may find it difficult to pull the shift
lever out of “P” (Park). This is called “torque lock.”
To prevent torque
lock, set the parking brake and then shift into
“P” (Park) properly before
you leave the driver’s seat.
To find out how, see “Shifting Into ‘P’ (Park)”
in the Index.
If ‘?.orque lock” does occur, you may need to have another vehicle push
yours
a little uphill to take some of the pressure from the transaxle, so
you can pull the shift lever out of “P” (Park).
PARKING OKER THINGS TMTBURN
,,
-
98
Page 111 of 398
Downloaded from www.Manualslib.com manuals search engine r
r
-
Page 112 of 398
Downloaded from www.Manualslib.com manuals search engine RUNNING YOUR ENGINE WHILE YOU’RE
PARKED
It’s better not to park with the engine running. But if you ever have to,
here are some things to know.
Follow the proper steps to be sure your vehicle won’t
move. See “Shifting
Into
‘P’ (Park)” in the Index.
If you are parking on a hill and if you’re pulling a trailer, also see “Towing
a Trailer” in the Index.
100