21 - 364
TRANSMISSION/TRANSFER
CASE
SPECIFICATIONS
•
AUTOMATIC TRANSMISSION
GENERAL SPECIFICATIONS
TRANSMISSION
MODEL
32RHI42RH
'36RH/37RHI46RH
Oil Pump Clearances (all)
0.089-0.190
mm
(0.0035-0.0075
in)
0.089-0.190
mm
(0.0035-0.0075
in)
Planetary End Play
0.127-1.22
mm
(0.005-0.048
in)
0.15-1.22
mm
(0.006-0.048
in)
Input Shaft End Play
0.56-2.31
mm
(0.022-0.091
in)
0.86-2.13
mm
(0.034-0.084
in)
Clutch Pack Clearance: Front Clutch - 3
Disc
Front Clutch - 4
Disc
Front Clutch - 5
Disc
Rear Clutch - 3
Disc
Rear Clutch - 4
Disc
1.88-3.17
mm
(0.074-0.125
in)
1.70-3.40
mm
(0.067-0.134
in)
1.90-3.86
mm
(0.075-0.152
in)
0.81-1.40
mm
(0.032-0.055
in)
0.81-1.40
mm
(0.032-0.055
in)
1.78-3.28
mm
(0.070-0.129
in)
2.08-3.83
mm
(0.082-0.151
in)
0.64-1.14
mm
(0.025-0.045
in)
Clutch
Disc
Usage:
Front Clutch
Rear Clutch
Overdrive Clutch (Gas)
Overdrive Clutch (Diesel) Direct Clutch 32RH
42RH 36RH/37 RH 46RH
Clutch
Disc
Usage:
Front Clutch
Rear Clutch
Overdrive Clutch (Gas)
Overdrive Clutch (Diesel) Direct Clutch 4
4
4
4 4
6 3/4
4 3/4
4
4
5
8
Front Clutch Spring
Usage
1 1
9
9/11
Band
Adjustments:
(backed off from 72 in. lbs.) Front
Band
Rear
Band
2Vi
4 2Yi
4 214
2
Th
2
Recommended Fluid (all)
MOPAR
ATF
Plus,
Type 7176 Automatic Transmission Fluid
J9321-210
32RH/36RH/37RH
SPACER/THRUST
PLATE/SNAP
RING
SPECIFICATIONS
TRANSMISSION
MODEL
COMPONENT
32RH 36RH/37RH
Front Clutch Thrust Washer
(on reaction shaft
support
hub) .061 in.
.061 in
.084 in
.102 in
Rear Clutch Thrust Washer
(on clutch
retainer)
.061 in
.061 in
Output Shaft Thrust Plate (on Output shaft pilot hub)
.060-.063
in
.060-.063
in
Output Shaft Thrust Washer (in
rear
clutch hub)
.052-.054
in
.068-.070
in
.083-085
in
.068-.070
in
Rear Clutch Pack
Snap
Ring
.068 in
.060 in
.076 in
.098 in .060 - .062 in
.074 - .076 in
.088 - .090 in .106 - .108 in
Planetary Geartrain
Snap
Ring
(At
front
end of output shaft) .040 - .044 in
.062 - .066 in .082 - .086 in .048 - .052 in
.055 - .059 in .062 - .066 in
J922M42
TRANSMISSION/TRANSFER
CASE
SPECIFICATIONS
21 • 366
TRANSMISSION/TRANSFER
CASE
SPECIFICATIONS
•
Overdrive Clutch
Fourth Gear Only Pressure should be
469-496
kPa
(68-72
psi) with closed throttle and increase to
620-896
kPa
(90-130
psi) at 1/2 to 3/4 throttle.
Line Pressure
(at accumulator) Closed Throttle
1000
rpm and above
372-414
kPa
(54-60
psi)
648 kPa (94 psi)
Front Servo Third Gear Only No more than
21
kPa (3 psi) lower than line pressure.
Rear Servo
1
Range
R Range No more then
21
kPa (3 psi) lower than line pressure. 1103 kPa (160 psi) at idle,
builds to 1862 kPa (270 psi) at 1600 rpm.
Governor D Range
Closed Throttle Pressure should respond smoothly to changes in mph and return to 0-7 kPa
(0-1
Vi
psi) when stopped with transmission in D,
1,
2. Pressure
above
7
kPa
(IV2
psi)
at
standstill
will
prevent
transmission
from
downshifting.
J9321-192
AUTOMATIC
TRANSMISSION
TORQUE
SPECIFICATIONS
DESCRIPTION TORQUE DESCRIPTION TORQUE
Cooler Line Fittings 18 N-m (13 ft. lbs.)
Converter Bolts: 9.5 in.,
3-lug
converter 54 N-m (40 ft. lbs.
9.5 in., 4-lug converter 74 N-m (55 ft. lbs. 10.0 in., 4-lug converter 74 N-m (55 ft. lbs.
10.75 in., 4-lug converter 31 N-m (270 in. lbs.
Crossmember Bolts/Nuts 68 N-m (50 ft. lbs. Driveplate Bolts 75 N-m (55 ft. lbs.
Extension Housing Bolts 43 N-m (32 ft. lbs.
Front Band Reaction Pin Access Plug 17 N-m (13 ft. lbs.
Front Band Adjusting Screw Locknut 34 N-m (25 ft. lbs.
Governor Body-to-Park Gear Bolts 11 N-m (8 ft. lbs.
Lockup Module Screws 4 N-m (35 in. lbs.
Neutral Switch 34 N-m (25 ft. lbs.
Oil Filter Screws 4 N-m (35 in. lbs.
Oil Pan Bolt 17 N-m (13 ft. lbs.
Oil Pump Bolt 20 N-m (15 ft. lbs.
Overrunning Clutch Cam Set Screw (36RH/46RH) 5 N-m (40 in. lbs. Overrunning Clutch Cam Bolts 17 N-m (150 in. lbs.
Overdrive Compounder-to- Transmission Case Bolts 34 N-m (25 ft. lbs.
Overdrive Piston Retainer Bolts (42RH/46RH) 17 N-m (150 in. lbs.
Pressure Test Port Plugs 14 N-m (10 ft. lbs.
Propeller Shaft Clamp Bolts 19 N-m (170 in. lbs.
Reaction Shaft Support Bolts 20 N-m (15 ft. lbs.
Rear
Band
Adjusting Screw Locknut 41 N-m (30 ft. lbs.
Rear Mount Bolts/Nuts 68 N-m (50 ft. lbs.
Rear Support Bolts (32RH/36RH) 17 N-m (150 in. lbs.
Solenoid Wiring Connector Screw 17 N-m (13 ft. lbs.
Solenoid-to-Transfer Plate Screw 4 N-m (35 in. lbs.
Speedometer Adapter Bolt 11 N-m (8 ft. lbs.
Valve Body Housing Screws 4 N-m (35 in. lbs.
Valve Body-to-Case Bolts 12 N-m (100 in. lbs.
J9221-157
AUTOMATIC TRANSMISSION PRESSURE TEST SPECIFICATIONS (42RH/46RH)
•
TRANSMISSION/TRANSFER
CASE
SPECIFICATIONS
21 - 367
DESCRIPTION
TORQUE
Backup Light Switch 22-34 N-m (193-300 in.
lbs.)
Countershaft Bearing Plate Bolts 19-26 N-m (170-230 in.
lbs.)
Fifth Gear Nut 339-475 N-m (250-350
ft. lbs.)
Drain
and
Fill Plugs 34-47 N-m (25-35
ft. lbs.)
Front Bearing Retainer Bolts 27-34 N-m (235-305 in.
lbs.)
Mainshaft Bearing Plate Bolts 19-26 N-m (170-230 in.
lbs.)
PTO
Cover Bolts 27-54 N-rn (20-40
ft.
lbs.)
Extension/Adapter Housing Bolts 41-68 N-m (30-50
ft.
lbs.)
Reverse Inhibitor Screws
8-14
N-m (75-115 in.
lbs.)
Shift Cover Bolts 27-31 N-m (216-276 in.
lbs.)
J9221-12
DESCRIPTION
TORQUE
Bearing Preload
Case
Bolts
Distance
Sensor
Coupling
Nut
Detent
Bolt
Drain/Fill
Plugs
Front/Rear Yoke Nuts Indicator Switch
Range
Lever
Locknut..
Rear
Retainer
Bolts
...
Speedometer Driven Gear
Nut
Transfer
Case
Mounting
Nuts.
. . . . 7-41
N»m
(5-30
in.
lbs.)
31
mm (23 ft. lbs.)
17
N»m
(150
in.
lbs.)
31
N»m (23 ft. lbs.) 54
N«m
(40 ft. lbs.) 176
N®m
(130 ft. lbs.)
24
N«m
(18 ft. lbs.)
10 N*m (90 in. lbs.)
54
N«m
(40 ft. lbs.)
11
N»m (100
in.
lbs.)
54
N«m
(40 ft. lbs.) J9221-250
G360
SET-TO
TORQUE
SPECIFICATIONS
NP241
TORQUE SPECIFICATIONS
Clutch Housing Bolts
47 N-m (35 ft. lbs.)
Drain/Fill Plugs
47 Nm (35 ft. lbs.)
Front/Rear Bearing
Retainer Bolts
.
22-30
N-m
(16-22
ft. lbs.)
Rear Crossmember Bolts/Nuts
. 68 N-m (50 ft. lbs.)
Shift Cover Bolts 22-30
N-m
(16-22
ft. lbs.)
Skid Plate
And
Crossmember Bolts/Nuts
41 N-m (30 ft. lbs.)
Transfer Case Attaching Nuts
47 Nm (35 ft. lbs.)
Transmission-To-Clutch Housing Bolts
68 N-m (35 ft. lbs.)
U-Joint Clamp Bolts
19 Nm (14 ft. lbs.)
Yoke
Nut 380 N-m (280 ft. lbs.)
J9321-333
DESCRIPTION
TORQUE
Oil Pump
Screws
1.4-1.8
N«m (12-15 in. lbs.)
Yoke
Nut (front/rear) 176-271 N»m (130-200 ft. lbs.)
Vacuum Switch
20-34 N«m (15-25 ft. lbs.)
Range
Lever
Nut
27-34 N»m (20-25 ft. lbs.)
Front
Case-To-Rear
Case
Bolts
.. 27-34 N»m (20-25 ft. lbs.)
Rear
Retainer
Bolts
47-61 N»m (35-45 ft. lbs.)
Extension
Housing
Bolts
35-46 N»m (26-34 ft. lbs.)
Drain/Fill
Plugs
41-54 N*m (30-40 ft. lbs.)
Detent
Plug
16-24
N@m
(12-18 ft. lbs.)
Front
Bearing
Retainer
Bolts
16-24 N»m (12-18 ft. lbs.)
Vacuum Switch
20-34 N*m (15-25 ft. lbs.)
Rear
Case
Stud
Nut 27-34 N*m (20-25 ft. lbs.)
Strut
Mounting Bracket Stud
Nut 27-34 N»m (20-25 ft. lbs.)
J9221-248
NV4500
TORQUE
SPECIFICATIONS
NP205
TORQUE
SPECIFICATIONS
