2023 TOYOTA VENZA HYBRID Owners Manual

Page 377 of 560

TOYOTA VENZA HYBRID 2023  Owners Manual 3776-1. Maintenance and care
6
Maintenance and careRemove dirt using a water-
dampened soft cloth or syn-
thetic chamois.
 Wipe the surface with a dry, 
soft cloth to remove any 
remaining moist

Page 378 of 560

TOYOTA VENZA HYBRID 2023  Owners Manual 3786-1. Maintenance and care
vacuum cleaner.
 Wipe off any excess dirt and 
dust with a soft cloth damp-
ened with diluted detergent.
Use a diluted water solution of 
approximately 5% neutral wool

Page 379 of 560

TOYOTA VENZA HYBRID 2023  Owners Manual 3796-2. Maintenance
6
Maintenance and care
6-2.Maintenance
■Repair and replacement
It is recommended that genuine 
Toyota parts be used for repairs to 
ensure performanc e of each sys-
tem. If non-T

Page 380 of 560

TOYOTA VENZA HYBRID 2023  Owners Manual 3806-2. Maintenance
■Resetting the message indicat-
ing maintenance is required
After the required maintenance is 
performed according to the mainte-
nance schedule, please reset the 
reminder light

Page 381 of 560

TOYOTA VENZA HYBRID 2023  Owners Manual 3816-2. Maintenance
6
Maintenance and care
General maintenance
Listed below are the general 
maintenance items that 
should be performed at the 
intervals specified in the 
“Owner’s Warranty Infor

Page 382 of 560

TOYOTA VENZA HYBRID 2023  Owners Manual 3826-2. Maintenance
Brake pedal
• Does the brake pedal move 
smoothly?
• Does the brake  pedal have 
appropriate 
clearance from 
the floor?
• Does the brake  pedal have the 
correct amount 
of

Page 383 of 560

TOYOTA VENZA HYBRID 2023  Owners Manual 3836-2. Maintenance
6
Maintenance and care
The OBD system determines 
that a problem exists some-
where in the emission control 
system. Your vehicle may not 
pass the I/M test and may need 
to be rep

Page 384 of 560

TOYOTA VENZA HYBRID 2023  Owners Manual 3846-2. Maintenance
loose
The malfunction indicator 
lamp comes on indicating a 
temporary malfunction and 
your vehicle may not pass the 
I/M test.
The error code in the OBD sys-
tem will not be clea