2023 TOYOTA SEQUOIA HYBRID Owners Manual

3214-5. Using the driving support systems
Owners Manual_USA_M0C043_en
4
Driving
When the shift lever is in P.
Moving view
Press .
See-through view
Press .
When the shift lever is in a posi-
tion other than P.
Panoramic view & front view
Select the front view button and
then turn ON the panoramic
view button.
Wide front view
Select the front view button and
then turn OFF the panoramic
view button.
Front split view
Select the front split view button.
When the shift lever is in a posi-
tion other than P.
Display
Checking around the vehi-
cle
Checking the front and
around the vehicle
Checking the rear and
around the vehicle

3224-5. Using the driving support systems
Owners Manual_USA_M0C043_en
Panoramic view & rear view
Select the rear view button and
then turn ON the panoramic
view button.
Wide rear view
Select the rear view button and
then turn OFF the panoramic
view button.
Rear split view
Select the rear split view button. The moving view screen and the
see-through view screen pro-
vide support when checking the
areas of around the vehicle
while parking. These screens
display an image of the vicinity
of the vehicle combined from the
4 cameras. The screen will dis-
play a 360° view around the
vehicle from either inside the
vehicle or from a birds-eye view
at an angle.
To display the moving view/see-
through view screen, press
when the shift lever is in P and
the intuitive parking assist is
enabled.
Moving view
Checking around the
vehicle
Screen display

3234-5. Using the driving support systems
Owners Manual_USA_M0C043_en
4
Driving
See-through view Display mode switching but-
ton
Select to change t he display mode
between the moving view and the
see-through view.
Rotation pause switch
Select to pause t he rotation of the
screen.
To resume rotation, select .
Body color setting switch
Select to display the body color set-
ting screen and change the color of
the vehicle displa yed on the pan-
oramic view monitor. ( P.338)
●Pressing on the screen or
again changes the screen back to
the previously displayed screen,
such as the navigation screen.

3244-5. Using the driving support systems
Owners Manual_USA_M0C043_en
The panoramic view & front view/wide front view/front split view
screen provides support when checking the areas in front of the
vehicle and around the vehicle when taking-off at T-intersectio ns or
other intersections during poor visibility.
To display the screen, press when the shift lever is in D or N with
the vehicle moving approximat ely 10 mph (16 km/h) or less.
This screen will be displayed if the intuitive parking assist d etects an
object in front of your vehicle (i ntuitive parking assist linked display).
Each time the display mode switching button is selected, the mo de
will change as follows:
Panoramic view & front view
Distance guide lines
Shows distance in front of the vehicle.
• Display points approximately 3 ft. (1 m) from the edge of the bumper.
Intuitive parking assist
When a sensor detects an obstacle, the direction of and the app roximate
distance to the obsta cle are displayed and the buzzer sounds.
Estimated course lines
Shows an estimated course when the steering wheel is turned.
• This line will be displayed when the steering wh eel is turned by 90° or
more from the cen ter (straight-line) position.
Guide line switching button
Select to change the guide line mode between the distance guide line mode
and the estimated course line mode. ( P.327)
Checking the front a nd around the vehicle
Screen display

3254-5. Using the driving support systems
Owners Manual_USA_M0C043_en
4
Driving
Automatic display button
Select to turn automatic display mode on/off. (P.328)
Display mode switching buttons
The display can be changed to var ious screens from button combinations.
Wide front view
Distance guide lines
Shows distance in front of the vehicle.
• Display points approximately 3 ft. (1 m) from the edge of the bumper.
Intuitive parking assist
When a sensor detects an obstacle, the direction of and the app roximate
distance to the obsta cle are displayed and the buzzer sounds.
Automatic display button
Select to turn automatic display mode on/off. (P.328)
Display mode switching buttons
The display can be changed to var ious screens from button combinations.
Front split view
Distance guide lines
Shows distance in front of the vehicle.

3264-5. Using the driving support systems
Owners Manual_USA_M0C043_en• Split view: Display points appro
ximately 1.5 ft. (0.5 m) from the edge of
the bumper.
• Panoramic view: Display points approximately 3 ft. (1 m) from the edge of the bumper.
Vehicle width guide lines
Shows guide lines of the vehicle’ s width including the outside rear view mir-
rors.
Front tire guide lines
Shows guide lines of where the f ront tire touches the ground.
Automatic display button
Select to turn automatic display mode on/off. (P.328)
Intuitive parking assist
When a sensor detects an obstacle, the direction of and the app roximate
distance to the obsta cle are displayed and the buzzer sounds.
●Pressing on the screen or changes the screen to the previousl y
displayed screen, such as the navigation screen.
●For details about the intuitive parking assist ( P.294).
●The display position of the intuitive parking assist and the po sition of
obstacles displayed in the camera image do not match.
WARNING
●When a sensor indicator on the in tuitive parking assist display illumi-
nates in red or a buzzer sounds continuously, be sure to check the area
around the vehicle immediately a nd do not proceed any further until
safety has been ensured, otherwise an unexpected accident may o ccur.
●As the intuitive parking assist display is displayed over the c amera view,
it may be difficult to see the intuitive parking assist display depending on
the color and brightness of the surrounding area.

3274-5. Using the driving support systems
Owners Manual_USA_M0C043_en
4
Driving
Each time the guide line switch-
ing button is selected, the mode
will change as follows:
Distance guide line
 Only the distance guide lines
are displayed.
Estimated course line
 Estimated course lines will be
added to the distance guide
lines.
The front split view screen dis-
plays images from the cameras
installed on each outside rear
view mirror. This screen is
designed to support the driver in safe driving in situations such as
when driving on a narrow road,
by allowing them to check the
areas around the sides of the
vehicle.

Check the positions and dis-
tance between the vehicle
width guide line and a target
object such as the obstacle or
curb of the road.
Switching the guide line
mode (panoramic view &
front view mode)
Using the vehicle width
guide line (front split view
mode)

3284-5. Using the driving support systems
Owners Manual_USA_M0C043_en
Pull over to the curb as shown
in the illustration above, tak-
ing care not to let the vehicle
width guide line overlap the
target object.
 Ensure that the vehicle width
guide line is parallel to the tar-
get object.
In addition to screen switching
by operating , automatic dis-
play mode is available. In this
mode, the screen is switched
automatically in response to
vehicle speed.
Each time is selected, auto-
matic display mode is
enabled/disabled.
In automatic display mode, the monitor will automatically dis-
play images in the following situ-
ations:

When the shift lever is shifted
to D or N.
 When vehicle speed is
reduced to approximately 10
mph (16 km/h) or less.
Automatic display mode