2020 MERCEDES-BENZ SPRINTER ignition

%
If
th e front axle is damaged, raise theve hicle
at the front axle and if there ar axle is dam‐
aged, raise theve hicle at there ar axle.
% Ve
hicles with automatic transmission
and rear-wheel drive: ifth ere is a malfunc‐
tion, the automatic transmission may be
loc ked in position 005D.
If th e automatic transmission cann otbe shif‐
te dto position 005C, transport theve hicle
(/ page 303). A towing vehicle with lifting
equipment is requ ired forve hicle transport. #
Obser vethe no tes on permissible towing
me thods (/ page 300). #
The propeller shafts tothe drive axles must
be remo ved if the maximum permissible tow‐
ing dis tance is exceeded. #
Vehicles with automatic transmission:
shift the automatic transmission toposition
005C. #
Release the parking brake. #
Switch off the ignition. Loading
theve hicle for transport #
Obser vethe no tes on permissible towing
me thods (/ page 301, 302). #
Connect theto w bar totheto wing eyeto load
th eve hicle. #
Vehicles with automatic transmission:
shift the automatic transmission toposition
005C.
% Ve
hicles with automatic transmission: in
th eeve nt of damage tothe electrics, the
automatic transmission may be loc ked in
position 005D.Toshift toposition 005C, provide
th e on-board electrical sy stem with po wer
( / page 295). #
Load theve hicle onto the transpor ter. #
Vehicles with automatic transmission:
shift the automatic transmission toposition
005D. #
Use the parking brake tosecure theve hicle
against rolling away. #
Only secure theve hicle bythe wheels. Ve
hicles with all-wheel drive/vehicles with
automatic transmission #
Make sure that the front and rear axles come
to rest on the same transpor tation vehicle.
* NO
TEDama getothe driv etra in due to
incor rect positioning #
Do not position theve hicle abo vethe
connection point of the transport vehi‐
cle. *
NO
TEVehicle damage due toimproper
loading An all-wheel drive
vehicle may be damaged if
it is tilted, pushed or mo ved while being loa‐
ded using a hydraulic platform. #
When loading a vehicle with all-wheel
drive, theve hicle should only be mo ved
and positioned byits own po wer. #
The vehicle and the sur face it is posi‐
tioned on should no longer be mo ved
when theke y is remo ved or if the door
is open. To
wing eyesto rage location The
towing eye is located in theve hicle tool kit in
th e front-passen gerfo ot we ll (/ page 305). Breakdown assis
tance 303

*
NO
TEDama geor malfunctions caused by
moisture Moisture may cause dama
getothe electrical
sy stem or cause it tomalfunction. #
When the fuse box is open, make sure
th at no moisture can enter the fuse box. #
When closing the fuse box, make sure
th at the seal of the lid is positioned cor‐
re ctly on the fuse box. If
th e new fuse which has been inser ted also
blo ws, ha vethe cause traced and rectified at a
qu alified specialist workshop.
Make sure of thefo llowing before replacing a
fuse:
R theve hicle is secured such that it does not
ro llaw ay
R all electrical consume rsare swit ched off
R the ignition is switched off
The fuses are located in various fuse bo xes:
R fuse box in the front-passenger foot we ll
(/ page 305)
R fuse box in the seat base of the driver's seat
(/ page 305) Opening
the fuse box in the seat base of the
dr iver's seat #
Toopen: press down and unclip fasteners 1
on the co ver. #
Remo vethe co ver. #
Toclose: pressthe co verfirm ly in tothe seat
base until fasteners 1clip in. Opening and closing
the fuse box in the co-
driver's foot we ll Opening
the fuse box #
Unlocking andremoving thestow age com‐
partment co ver in the co-driver's foot we ll
(/ page 306). Example:
vehicle tool kit insert #
Lift the insert at mar ked positions 1. #
Pull the insert out of clips 2.
Closing the fuse box #
Slide the insert into clips 2. #
Close the insert bypressing on mar ked posi‐
tions 1. #
Put on thestow age compartment co ver in the
co-driver's foot we ll and lock it (/ page 306). Ve
hicle tool kit Information on
theve hicle tool kit The
vehicle tool kit is located in thestow age com‐
partment in thefo ot we ll on the front-passenger
side (/ page 306).
The vehicle tool kit contains:
R ato wing eye
R a scr ewdriver with Torx, Phillips and slotted
bits
The vehicle tool kit may also contain thefo llow‐
ing, forex ample:
R an open-end wrench
R a wheel wrench Breakd
own assi stance 305

Make sure
toobser vethefo llowing fur ther rela‐
te d subject:
R Notes on tire pressure (/ page310)
Checking the tire pressure with the tire pres‐
sure monitoring sy stem
Requ irements:
R The ignition is switched on.
On-board computer: 4 Service 5
Tires
One of thefo llowing displa ysappears:
R The cur rent tire pressure and tire temp era‐
ture of the individual wheels. Instrument Display with color display
R The cur rent tire pressure for each wheel. Instrument Display with black
and white display
R Tire pressure will be displayed after driving a
few minutes :th ete ach-in process of the sys‐
te m is not yet compl ete. The tire pressures
are already being monitored. #
Compare the tire pressure with there com‐
mended tire pressure forth e cur rent ope rat‐
ing condition (/ page 311). Obser vethe
no tes on tire temp erature (/ page310).
% The
values displa yed in the multifunction dis‐
play may deviate from those of the tire pres‐
sure gauge as they referto sea le vel.At high
altitudes, the tire pressure values indicated
by a pressure gauge are higher than those shown
bythe on-board computer. In this
case, do not reduce the tire pressure.
Make sure toobser vethefo llowing fur ther rela‐
te d subject:
R Notes on tire pressure (/ page310)
Rest arting the tire pressure monitor
Requ irements:
R The recommended tire pressure is cor rectly
set forth ere spective operating condition on
each of the wheels (/ page310).
R Rest
artthe tire pressure monitoring sys‐
te m in the following situations:
- The tire pressure has changed.
- The wheels or tires ha vebeen changed or
newly ins talled.
On-board computer: 4 Service 5
Tires #
Scroll down in the menu.
The Use Current Pressures as New Refer-
ence Values message appears in the multi‐
function displa y. #
Con firm the message toinitiate a restart.
The Tire Press. Monitor Restarted message
appears in the multifunction displa y.
Cur rent wa rning messages are dele ted and
th e0077 yellow warning lamp goes out.
Af teryo u ha vedriven for a few minutes, the
sy stem checks whe ther the cur rent tire pres‐
su res are within the specified range. The cur‐
re nt tire pressures are then accep ted as ref‐
erence values and monitored. 316
Wheels and tires

about one full turn. Do not unscr
ewthe wheel
nuts or bolts comple tely. #
Raise theve hicle (/ page 328). Ra
ising theve hicle when changing a wheel &
WARNING Risk of inju ryfrom jack tip‐
ping
If yo u park a vehicle with air suspension, the
air suspension may remain activated for up to
one hour, even when the ignition is switched
off. If youth en raise theve hicle with the jac k,
th e air suspension will attem pttoadjust the
ve hicle le vel.
The jack may tip. #
Press the Service button on the air sus‐
pension remo tecontrol before raising
th eve hicle.
This pr events au tomatic readjustment
of theve hicle le vel and pr events it from
being raised or lo wered manually. &
WARNING Risk of inju ryfrom incor rect
positioning of the jack
If yo u do not position the jack cor rectly at the
appropriate jacking point of theve hicle, the
jack could tip wi th theve hicle raised. #
Only position the jack at the appropriate
jacking point of theve hicle. The base of
th e jack must be positioned vertically
under the jacking point of theve hicle. &
WARNING Risk of inju ryfrom vehicle tip‐
ping
On slopes, the jack could tip with theve hicle
ra ised. #
Neverch ange a wheel on a slope. #
Consult a qualified specialist workshop. *
NO
TEVehicle damage from the jack If
yo u do not position the jack cor rectly at the
appropriate jack support point of theve hicle,
th e jack could tip over with theve hicle raised. #
The jack is designed exclusively for
jacking up theve hicle at the jack sup‐
port points. Re
quirements: R
There are no persons in theve hicle.
R The vehicle is prepared forch anging a wheel
(/ page 327).
Only position the jack on the jack support points
intended forth is purpose. You could otherwise
damage theve hicle.
Impor tant no tes on using the jack:
R Only use theve hicle-specific jack that has
been tested and appr ovedby Mercedes-Benz
to raise theve hicle. If the jack is used incor‐
re ctl y,it could tip over while theve hicle is
ra ised.
R The jack is designed only toraise theve hicle
fo r a short time while a wheel is being
ch anged and is not suitable for car rying out
maintenance workunder theve hicle.
R Avoid changing a wheel on uphill and downhill
slopes.
R The jack must be placed on a firm ,fl at and
non-slip sur face. If necessar y,use a lar ge,
fl at, load bearing and non-slip unde rlay.
R The base of the jack is positioned vertically
under the jack support point.
Saf ety instructions while theve hicle is raised:
R Do not put your hands or feet under theve hi‐
cle.
R Do not lie underneath theve hicle.
R Do not start theve hicle and do not release
th e parking brake.
R Do not open or close any doors.
Ve hicles with rear wheel drive Jack
support points 328
Wheels and tires

Engine number
The engine number is
stamped onto the crank‐
case. You can obtain fur ther information from any
qu alified specialist workshop. Operating fluids and capacities
Note
s on operating fluids &
WARNING Risk of inju ryfrom operating
fl uids harmful to your health
Operating fluids may be poisonous and harm‐
ful to yo ur health. #
Obse rveth ete xt on the original contain‐
ers when using, storing or disposing of
operating fluids. #
Alwaysst ore operating fluids sealed in
th eir original containers. #
Alwayske ep children away from operat‐
ing fluids. +
ENVIRONMEN
TALNO TEEnvironmental
pollution due todisposing of operating
fl uids in a non-environmen tally responsi‐
ble manner Operating
fluids include thefo llowing:
R fuels
R exhaust gas af tertre atment additives, e.g.
DEF
R lubricants
Incor rect disposal of ope rating fluids can
cause considerable damage tothe environ‐
ment. #
Dispose of operating fluids in an envi‐
ro nmentally responsible manner. Operating
fluids include thefo llowing:
R Fuels
R Exhaust gas af tertre atment additives, e.g.
DEF
R Lubricants
R Coolant
R Brake fluid
R Windshield washer fluid
R Climate control sy stem refrigerants
Use only products recommended byMercedes-
Benz. Damage caused bythe use of products that ha
ve not been appr oved is not co veredby the
Mercedes-Benz guarantee or goodwill gestures.
Yo u can identify operating fluids appr oved by
Mercedes-Benz bythefo llowing insc ript ions on
th e container:
R MB-F reigabe (e.g. MB- Freigabe 229. 51 )
R MB-Appr oval (e.g. MB-App rova l 229.51)
Fu rther information on appr oved operating fluids
is available at thefo llowing locations:
R Inthe MB Specifications for operating fluids
at http://be vo.mercedes-benz.com (by enter‐
ing the designation)
R Ataqu alified specialist workshop &
WARNING Risk offire or explosion from
fuel
Fu els are highly flammable. #
Fire, open flames, smoking and creation
of spar ksmust be avoided. #
Swit choff the ignition and, if available,
th est ationary heater, before and while
re fueling theve hicle. &
WARNING Risk of inju ryfrom fuels
Fu els are poisonous and hazardous to your
health. #
Do not swallow fuel or let it come into
contact wi thskin, eyes or clo thing. #
Do not inhale fuel vapor. #
Keep children away from fuel. #
Keep doors and windo wsclosed du ring
th ere fueling process.
If yo u or other people come into contact with
fuel, obser vethefo llowing: #
Immediately rinse fuel off your skin with
soap and water. #
If fuel comes into contact with your
ey es, immediately rinse them thor‐
oughly with clean water.Seek medical
attention immediately. #
Ifyo u swallow fuel, seek medical atten‐
tion immediatel y.Do not induce vomit‐
ing. #
Change immediately out of clo thing that
has come into con tact wi thfuel. 340
Tech nical da ta

Fu
el Note
s on fuel grades on vehicles with a gaso‐
line engine
Obser vethe no tes on operating fluids
(/ page 340).
* NO
TEDo not use diesel torefuel vehicles
with a gasoline engine. If
yo u acciden tally refuel with the wrong fuel:
R Do not switch on the ignition. Otherwise
fuel can enter the engine.
Even small amounts of the wrong fuel
could result in damage tothe fuel sy stem
and the engine. The repair costs are high. #
Contact a qualified specialist workshop. #
Have the fuel tank and fuel lines drained
comple tely. Only
refuel using lo w-sulfur regular fuel with at
least 87AKI/91 RON.
% E10 fuel contains an additive of up
to10%
et hanol. Your vehicle is suitable for use with
E10 fuel. You can fuel your vehicle with E10
fuel.
* NO
TEDama gecaused bythe wrong fuel Even small amounts of
the wrong fuel could
re sult in damage tothe fuel sy stem, engine
and exhaust sy stem. #
Only refuel with there commended fuel. *
NO
TEDama gecaused bythe wrong fuel Even small amounts of
the wrong fuel could
re sult in damage tothe fuel sy stem, engine
and exhaust sy stem.
Ne verre fuel with thefo llowing:
R Diesel
R Gasoline with more than 10%ethanol by
vo lume, e.g. E15, E20, E85, E100
R Gasoline with more than 3% me thanol by
vo lume, e.g. M15, M30, M85, M100
R Gasoline with additives con taining me tal #
Do not mix su chfuels with the fuel rec‐
ommended foryo ur vehicle. %
To
ensure the long evity and per form ance of
th e engine, only unleaded regular gasoline
may be used. No
tethat the higher quality premium grade
ga soline can be refueled at any time.
If yo u are using drums or canis ters to refuel the
ve hicle, you should filter the fuel before filling.
This will pr event malfunctions in the fuel sy stem
due tocontaminated fuel.
Usually you will find information about the fuel
grade on the fuel pump. If there is no identifica‐
tion on the fuel pump, consult a gasst ation
attendant.
% Fo
r fur ther information, contact a qualified
specialist workshop or visit http://
www.mbusa.com (USA only).
Note s on additives in gasoline
Obser vethe no tes on operating fluids
(/ page 340).
* NO
TEDama gefrom use of unsuitable
additives Even small amounts of
the wrong additive
may lead tomalfunctions. #
Only add cleaning additives recommen‐
ded byMercedes-Benzto the fuel. Mercedes-Benz
recommends using brand-name
fuels wi thadditives.
In some countries, theav ailable fuel may not con‐
ta in suf ficient amounts of additi ves. Deposits
could build up in the fuel injection sy stem as a
re sult.
In this case, in consultation with an authorized
Mercedes-Benz Center, the fuel should be mixed
with the cleaning additive recommended by
Mercedes-Benz.
Yo u must obse rveth e no tes and mixing ratios
indica ted on the container.
Note s on fuel grades on vehicles with diesel
engines
Gene ral no tes
Obser vethe no tes on operating fluids
(/ page 340). &
WARNING Risk offire from fuel mixture
If yo u mix diesel fuel with gasoline, theflash
point of the fuel mixture is lo werth an that of
pure diesel fuel.
While the engine is running, component pa rts
in theex haust sy stem may overheat without
wa rning. Te
ch nical da ta341

#
Neverre fuel using gasoline in diesel
engines. #
Never mix gasoline with diesel fuel. *
NO
TEDama gedue toincor rect fuel Even small amounts of
the wrong fuel could
re sult in damage tothe fuel sy stem, the
engine and emission cont rol sy stem.
Ne verre fuel with:
R Gasoline
R Marine diesel
R Heating oil
R Pure bio-diesel or vege tab le oil
R Paraffin or kerosene #
Do not mix such fuels with diesel fuel
and do not use any special additives.
If yo u ha veaccidentally refueled with the
wrong fuel, obser vethefo llowing: #
Do not switch on the ignition. #
Consult a qualified specialist workshop. *
NO
TEMalfunctions due tocontaminated
fuel Fu
el contamination can lead tomalfunctions
in the fuel sy stem. #
Ifyo u are using drums or canis ters to
re fuel theve hicle, you should filter the
fuel before filling. *
NO
TEDama gedue toincor rect fuel Incor
rect fuel can lead toengine damage. #
Refuel only ULSD or diesel fuel with a
sulfur content of maximum 15ppm. Usually
you will find information about the fuel
grade on the fuel pump. If there is no identifica‐
tion on the fuel pump, consult a gasst ation
attendant.
The fuel grade recommended foryo ur vehicle is
fo und on the instruction label in the fuel filler
fl ap . Note
s on low outside temperatures &
WARNING Risk offire and explosion due
to fuel igniting
If yo u heat fuel sy stem components, e.g. with
a heat gun or open flame, these components
could be damaged.
Fu el may leak out and ignite. Depending on
th e type of damage, fuel might not escape
until the engine is running. #
Never heat fuel sy stem components. #
Consult a qualified specialist workshop
to have the malfunction rectified. Re
fill only with commercially available ULTRA-
LO W SULFUR DIESEL (ULSD, maximum sulfur
content 15ppm), which fulfills the ASTM D9 75
st andard.
The flow properties of diesel fuel may be inade‐
qu ate at low outside temp eratures due toparaf fin
separation.
% Malfunctions
resulting from paraf fin separa‐
tion can only be rectified byheating the
entire fuel sy stem. Park theve hicle in a
heated garage ,fo rex ample.
To prev ent malfunctions, diesel fuel with
impr oved flow ch aracteristics is available in the
winter mon ths. Yo u can obtain fur ther informa‐
tion on this at thega sst ation or from your fuel
supplier.
Yo ur vehicle is equipped with a fuel preheating
sy stem. This additionally impr ovesth eflow char‐
acteristics of the diesel fuel byabout 14.5 °F
(8 °C). ULTR A-LO W SULFUR DIESEL can be used
without risk of malfunction down toan outside
te mp erature of appr oximately 14.5 °F (-10 °C).
* NO
TEDama gedue togasoline or paraf fin Gasoline or paraf
fin in diesel fuel impairs the
lubricity of the fuel. This can result in damage
to the fuel injection sy stem, forex ample. #
Do not add any gasoline or paraf fin to
diesel fuel toimpr oveitsflow character‐
istics. B20 fuels with bio-diesel content
* NO
TEDama gedue toincor rect fuel Continuous use of fuels wi
thbio-diesel con‐
te nt ove r 5% (B20 fuels) can lead tofuel filter 342
Tech nical da ta

Saf
ety sy stems Display messages
Possible causes/consequences and 0050 0050Solutions
0075
Left Side Curtain Airbag
Malfunction Service
Required (exa mp le) *T
herespective window cur tain airbag is malfunctioning
(/ page 35). &
WARNING Risk of inju ryor fata l injury due tomalfunctions
in the window airbag
If th e window airbag is malfunctioning, it might be triggered
unintentionally or might not be triggered at all in theeve nt of an
accident wi thhigh deceleration. #
Have the window airbag checked and repaired immediately
at a qualified specialist workshop. #
Consult a qualified specialist workshop immediatel y.
0075 Front Left Malfunction
Service Required (exa m‐
ple) *T
herespective restra int sy stem is malfunctioning (/ page31). &
WARNING Risk of inju rydue tomalfunctions in there stra int
sy stem
If th ere stra int sy stem is malfunctioning, restra int sy stem com‐
ponents may be triggered unintentionally or may not deploy as
intended during an accident. This may af fect the Emer gency Ten‐
sioning Devices or airbags, forex ample. #
Have there stra int sy stem checked and repaired immedi‐
ately at a qualified specialist workshop. Re
cognition of a restra int sy stem malfunction:
R The 0075 restra int sy stem warning lamp does not light up when
th e ignition is switched on.
R The 0075 restra int sy stem warning lamp lights up continuously
or repeatedly during a journe y. #
Consult a qualified specialist workshop immediatel y.
0075 SRS Malfunction Service
Required *T
herestra int sy stem is malfunctioning (/ page31). &
WARNING Risk of inju rydue tomalfunctions in there stra int
sy stem
If th ere stra int sy stem is malfunctioning, restra int sy stem com‐
ponents may be triggered unintentionally or may not deploy as
intended during an accident. This may af fect the Emer gency Ten‐
sioning Devices or airbags, forex ample. #
Have there stra int sy stem checked and repaired immedi‐
ately at a qualified specialist workshop. Re
cognition of a restra int sy stem malfunction:
R The 0075 restra int sy stem warning lamp does not light up when
th e ignition is switched on.
R The 0075 restra int sy stem warning lamp lights up continuously
or repeatedly during a journe y. #
Consult a qualified specialist workshop immediatel y. 356
Display messages and warning and indicator lamps