2019 MITSUBISHI L200 Owner's Manual (in English)

Enrollment commandsPhraseEnglishFrenchSpanishItalianGermanDutchPortugueseRussian1012345678901234567890123456789012345678901234567890123456789012345678901234567892888 555 1212888 555 1212888 555 1212888 555 1212888 555 1212888 555 1212888 555 1212888 555 12123CallAppelerLlamarChiamaAnrufenBellenLigarYu~hy4DialComposerMarcarComponiWlhlenNummer keuzeMarcardwxhj5SetupConfigurerConfiguraciynConfiguraEinrichtungSetupConfigurardwkljhcdw6CancelAnnulerCancelarAnnullaAbbrechenAnnulerenCancelarelf_gw7ContinueContinuerContinuarContinuaWeiterDoorgaanContinuarfjh{he}blv8HelpAideAyudaAiutoHilfeHelpAjudahijwydw

USB input terminal*
You can connect your USB memory device or iPod *
to play music files stored in the USB
memory device or iPod.* “iPod” is a registered trademark of Apple
Inc. in the United States and other coun-tries.The USB input terminal (A) is located in theindicated position.This section explains how to connect and re-
move a USB memory device or iPod.
See the following section for details on how to play music files.
Refer to “Listen to an iPod*” on page 7-30.
Refer to “Listen to Audio Files on a USB De-
vice” on page 7-56.
Refer to “To play iPod/USB memory device tracks via voice operation” on page 7-58.How to connect a USB memory
device
1. Park your vehicle in a safe place and
turn the ignition switch to the “LOCK”
position or put the operation mode in
OFF.
USB input terminal*
7-932.7((For pleasant driving7Vehicles without Smart-
phone Link Display Audio
Vehicles with Smartphone
Link Display Audio

2.Open the USB input terminal cover (A)
on the centre console.
3. Connect a commercially available USB
connector cable (C) to the USB memory
device (B).
4. Connect the USB connector cable to the
USB input terminal.NOTEz Do not connect the USB memory device to
the USB input terminal directly.
The USB memory device may be damaged.
5. To remove the USB connector cable,
turn the ignition switch to the “LOCK”
position or put the operation mode in
OFF first and perform the installation steps in reverse.
CAUT,ONz After removing the USB connector cable, be
sure to close the terminal cover. Entry of for- eign matter into the terminal may cause a
malfunction.How to connect an iPod
1. Park your vehicle in a safe place and
turn the ignition switch to the “LOCK”
position or put the operation mode in
OFF.
2. Open the USB input terminal cover (A)
on the centre console.
3. Connect the connector cable to the iPod.
NOTEz Use a genuine connector cable from Apple
Inc.
4. Connect the connector cable to the USB
input terminal.
5. To remove the connector cable, turn the
ignition switch to the “LOCK” position
or put the operation mode in OFF first and perform the installation steps in re-verse.
USB input terminal*
7-942.7((For pleasant driving7Vehicles without Smart-
phone Link Display Audio
Vehicles with Smartphone
Link Display Audio Vehicles without Smart-
phone Link Display Audio
Vehicles with Smartphone
Link Display Audio

CAUT,ONzAfter removing the connector cable, be sure
to close the terminal cover. Entry of foreign
matter into the terminal may cause a mal-
function.Types of connectable devices
and supported file specifica- tions
Except for vehicles equipped with the Bluetooth

NOTEzDo not connect to the USB input terminal
any device (hard disk, card reader, memory reader, etc.) other than the connectable devi- ces specified in the previous section. The de- vice and/or data may be damaged. If any of
these devices was connected by mistake, re- move it after turning the ignition switch to
the “LOCK” position or putting the opera-
tion mode in OFF.
File specifications
You can play music files of the following
specifications that are saved in a USB memo-ry device or other device supporting mass
storage class. When you connect your iPod, playable file specifications depend on the connected iPod.
ItemConditionFile formatMP3, WMA, AAC,
WAVMaximum number of
levels
(including the root)
Level 8
Number of folders700Number of files65,535HDMI terminal*
You can connect a commercially available HDMI device such as a video camera and a smart phone to the HDMI terminal (A).NOTEz For details, refer to the separate owner’s
manual for a Smartphone Link Display Au-
dio.
To connect
1. Park your vehicle in a safe place and
turn the ignition switch to the “LOCK”
position or put the operation mode in
OFF.
2. Open the terminal cover (A) on the cen-
tre console.
3. Connect a commercially available
HDMI cable to the HDMI device.
4. Connect a HDMI cable to the HDMI ter-
minal.
5. To remove the HDMI cable, perform the
installation steps in reverse.
CAUT,ONz After removing the HDMI cable, be sure to
close the terminal cover. Entry of foreign
matter into the terminal may cause a mal- function.
HDMI terminal*
7-962.7((For pleasant driving7

Sun visors
1- To eliminate front glare
2- To eliminate side glare
Card holder*
Cards can be slipped into the holder (A) on
the back of the sun visor.
Vanity mirror*
A vanity mirror is fitted to the back of the sun visor on the passenger side.
AshtrayCAUT,ONz Put out matches and cigarettes before they
are placed in the ashtray.
z Don’t put papers and other things that burn
into your ashtrays. If you do, cigarettes or
other smoking materials could set them on fire, causing damage.
z Always close the ashtray. If left open, other
cigarette butts in the ashtray may be rekin-
dled.
To use the moveable ashtray, open the lid.
Sun visors
7-972.7((For pleasant driving7 Type 1 Type 2

Mounting position for movea-ble ashtray
The moveable ashtray can be fitted at the in- dicated position.
Cigarette lighter
The cigarette lighter can be used while the ig- nition switch or the operation mode is in ON or ACC.
1- Push all the way in.
The cigarette lighter will automatically return to its original position with a “click” when ready. Pull it out for use.
After use, insert the cigarette lighter to its
original position in the socket.
NOTEz Do not leave the cigarette lighter removed
from its socket, because the socket might be- come clogged by foreign material and be
short-circuited.CAUT,ONz Do not touch the heating element or the cig-
arette lighter housing, hold the knob only to prevent burns.
z Do not allow children to operate or play with
the cigarette lighter as burns may occur.
z Something is wrong with the cigarette light-
er if it does not pop back out within approxi-
mately 30 seconds of being pushed in.
Pull it out and have the problem corrected at MITSUBISHI MOTORS Authorized Serv-
ice Point.
z Do not use any electric appliance that is not
approved by MITSUBISHI MOTORS . Do-
ing so could damage the socket. If you used the cigarette lighter after damaging the sock-
et, the cigarette lighter might pop out or fail to come out after being pushed in.
z When the cigarette lighter socket is used as a
power source for an electric appliance, be sure that the electric appliance operates at
12 V and has an electric capacity of 120 W or less. In addition, long use of the electricappliance without running the engine may
run down the battery.Accessory socket
The accessory socket can be used while the
ignition switch or the operation mode is in
ON or ACC.
Cigarette lighter
7-982.7((For pleasant driving7For the front seat
For the rear seat

To use a plug-in type accessory, open the lid,
and insert the plug in the accessory socket.CAUT,ONz Be sure to use a “plug-in” type accessory op-
erating at 12 V and at 120 W or less.
When using more than one socket at the same time, make sure that the electrical ac-
cessories are 12 V accessories and that the total power consumption does not exceed
120 W.
z Long use of the electric appliance without
running the engine may run down the bat- tery.
z When the accessory socket is not in use, be
sure to close the lid, because the socketmight become clogged by foreign materialand be short-circuited.Digital clock*
The digital clock indicates the time with the ignition switch or the operation mode is in
ON or ACC.
To set the time
Set the time by pressing the various buttons
as described below.
1- To adjust the hour
2- To adjust the minutes
3- To reset the minutes to zero

10:30 - 11:29...... Changes to 11:00
11:30 - 12:29...... Changes to 12:00
NOTEz If the battery cables are disconnected during
repairs or for any other reason, reset the
clock to the correct time after they are recon-
nected.Interior lamps
1- Front room & map lamps*
2- Rear room lamp
NOTEz If you leave the lamps on without running
the engine, you will run down the battery.
Before you leave the vehicle, make sure that
all the lamps are off.
Digital clock*
7-992.7((For pleasant driving7

Room lampsPosition of
lamp switchOn/off control1-ON
(
)
The lamp illuminates re-
gardless of whether a door
is open or closed.Position of
lamp switchOn/off control2-DOOR
(
)
Delayed off function[Vehicles without central
door lock system@
The lamp illuminates when
a door is opened. It goes off
about 7 seconds after all
doors are closed.
However, the lamp goes off
immediately when the igni-
tion switch is turned to the
“ON” position with all
doors closed.
[Vehicles with central door
lock system@
The lamp illuminates when
a door is opened. It goes off
about 15 seconds after the
all doors are closed.
However, the lamp goes off
immediately with all doors
closed in the following ca-
ses:
Interior lamps
7-1002.7((For pleasant driving7Front* Rear (Type 1)* Rear (Type 2)*