2019 MITSUBISHI L200 Owner's Manual (in English)

zDisable automatic air control
Even when the AUTO switch is pressed, the air selection switch is not controlled
automatically.

z Setting change method
Hold down the air selection switch for
approximately 10 seconds or more.

zDisable automatic air conditioning con-
trol
The air conditioning switch is not con-
trolled automatically as long as the air
conditioning switch is not operated.

z Setting change method
Hold down the air conditioning switch for approximately 10 seconds or more.

Demister switch
When this switch is pressed, the mode
changes to the “
” mode. The indication
lamp (A) will come on. The selected mode is shown in the display (B). (Refer to “Mode se-
lection” on page 7-03.)
NOTEz When the demister switch is pressed, the air
conditioning system automatically operates and outside air (as opposed to recirculated air) is selected. This automatic switching control is carried out to prevent misting of
the windows even if “Disable automatic air conditioning control” or “Disable automaticair control” is set. (Refer to “Customizing
the air conditioning switch” on page 7-13,
“Customizing the air selection” on page 7-12.)Operating the system in auto-
matic mode
In normal conditions, use the system in the
AUTO mode and follow these procedures: 1. Press the AUTO switch.
2. Set the temperature control switch to the
desired temperature.
The mode selection, blower speed adjust-
ment, recirculated/outside air selection, tem-
perature adjustment, and air conditioner ON/OFF status are all controlled automatical-
ly.
NOTEz If the blower speed selection switch, air con-
ditioning switch, Mode switch, or air selec- tion switch is operated while the system is
operating in the AUTO mode, the activated
function overrides the corresponding func- tion of automatic control. All other functions
remain under automatic control.Operating the system in man-
ual mode
Blower speed and ventilator mode may be
controlled manually by setting the blower speed selection switch and the MODE switchto the desired positions.
To return to automatic operation, press the AUTO switch.
Demisting of the windscreen
and door windowsCAUT,ONz For safety, make sure you have a clear view
through all the windows.
Automatic climate control air conditioner*
7-152.7((For pleasant driving7

For ordinary demisting
1. Set the air selection switch to the outsideposition.
2. Set the MODE switch to the “
” posi-
tion.
3. Select your desired blower speed by pressing the blower speed selection
switch.
4. Select your desired temperature by pressing the temperature control switch.
5. Press the air conditioning switch.
For quick demisting
1. Press the demister switch to change to the “
” position.
2. Set the blower to the maximum speed.
3. Set the temperature to the highest posi- tion.
NOTEz To demist effectively, direct the air flow
from the side ventilators towards the door
windows.
z Do not set the temperature to the max. cool
position. Cool air will blow against the win-
dow glasses and prevent demisting.NOTEz For vehicles with the Auto Stop & Go
(AS&G) system, if the demister switch is
pressed, the Auto Stop & Go (AS&G) sys- tem will not operate and the engine will notstop automatically even if the vehicle is stopped. This is to ensure that good visibility
is maintained.Important operation tips for
the air conditioning
z Park the vehicle in the shade.
Parking in the hot sun will make the ve-
hicle inside extremely hot, and it will re-
quire more time to cool the interior.
If it is necessary to park in the sun, open the windows for the first few minutes of
air conditioning operation to expel the
hot air.
z Close the windows when the air condi-
tioning is in use. The entry of outside air
through open windows will reduce the cooling efficiency.
z Too much cooling is not good for the
health. The inside air temperature should
only be 5 to 6

zWhen operating the system, make sure
the air intake, which is located in front of the windscreen, is free of obstructionssuch as leaves and snow. Leaves collec-
ted in the air-intake plenum may reduce
air flow and plug the plenum water drains.
Air conditioning system refrig-
erant and lubricant recommen- dations
If the air conditioning seems less effective
than usual, the cause might be a refrigerant leak. We recommend you to have the systeminspected.
The air conditioning system in your vehicle
must be charged with the refrigerant HFO- 1234yf and the lubricant YR20.Use of any other refrigerant or lubricant will
cause severe damage which will result in the
need to replace your vehicle’s entire air con- ditioning system. The release of refrigerant
into the atmosphere should be prevented.
It is recommended that the refrigerant be re- covered and recycled for further use.
During a long period of disuse
The air conditioning should be operated for at
least five minutes each week, even in cold weather. This is to prevent poor lubrication ofthe compressor internal parts and to maintain
the air conditioning in the best operating con- dition.
Air purifier*
An air filter has been incorporated into thisair conditioner so that dirt and dust are
cleaned from the air.
Replace the air filter periodically as its ability
to clean the air will be reduced as it collects pollen and dirt. For the maintenance interval,
refer to the “SERVICE BOOKLET”.
NOTEz Operation in certain conditions such as driv-
ing on a dusty road and frequent use of the air conditioner can lead to reduction of serv-
ice life of the filter. When you feel that the air flow is lower than normal or when the
windscreen or windows start to fog up easi- ly, replace the air filter.
We recommend you to have it checked.AM/FM radio/CD player
with AUX*
The audio system can only be used when the
ignition switch or the operation mode is in
ON or ACC.NOTEz For vehicles equipped with the Keyless op-
eration system, if the operation mode is left
in ACC, the accessory power will automati- cally turn off after a certain period of time
and you will no longer be able to use the au- dio system. The accessory power comes on again if the engine switch is operated with it
in the “ACC” position. Refer to “ACC pow- er auto-cutout function” on page 6-15.
z If a cellular phone is used inside the vehicle,
it may create noise from the audio equip-
ment. This does not mean that anything is wrong with your audio equipment. In such acase, use the cellular phone at a place as far
away as possible from the audio equipment.
z If foreign objects or water get into the audio
equipment, or if smoke or a strange odour comes from it, immediately turn off the au-
dio system. We recommend you to have it checked. Never try to repair it by yourself.
Avoid continuous usage without inspection
by a qualified person.
Air purifier*
7-172.7((For pleasant driving7

Important Points on Usage
iPod/iPhone Playback Func-tion*
z This product supports audio playback
from iPod/iPhone devices, however dif- fering versions mean that playback can-not be guaranteed.
z Please be aware that depending on the
iPod/iPhone model or version, operation may differ.
How to Clean
z If the product becomes dirty, wipe with a
soft cloth.
z If very dirty, use a soft cloth dipped in
neutral detergent diluted in water, and
then wrung out. Do not use benzene,
thinners, or other chemical wipes. This may harm the surface.
Trademarks
z Product names and other proper names
are the trademarks or registered trade-marks of their respective owners.
z Furthermore, even if there is no specific
denotation of trademarks or registered
trademarks, these are to be observed in their entirety.

“Made for iPod”, “Made for iPhone” mean that an electronic accessory has been de-signed to connect specifically to iPod or
iPhone, respectively, and has been certified
by the developer to meet Apple performance standards.
iPhone, iPod, iPod classic, iPod nano, and
iPod touch are trademarks of Apple Inc., reg- istered in the U.S. and other countries.
Apple is not responsible for the operation of this device or its compliance with safety and
regulatory standards.
NOTEz iPod and iTunes licensing allows individual
users to privately reproduce and play non-copyrighted material as well as material
that may be legally copied and reproduced.
Infringement of copyright is prohibited.
Supported models
z iPhone5S
z iPhone5c
z iPhone5
z iPhone4S
ziPhone4
z iPhone3GS
z iPhone3G
z iPhone
z iPod Nano (3 rd
Generation ~ 7 th
Genera-
tion)
z iPod Touch (1 st
Generation ~ 5 th
Genera-
tion)
z iPod ClassicHandling of Discs
This explains care that should be taken in the
handling of discs.
Important Points on Handling
z Fingerprints or other marks on the read
surface of the disc may result in its con-
tent being more difficult to read. When
holding the disc, grip both edges, or one edge and the centre hole, in order that
the read surface is not touched.
z Do not affix paper or stickers, or other-
wise damage the disc.
z Do not forcefully insert a disc if another
is already within the device. This can re-
sult in damage to discs, or malfunction.
Handling of Discs
7-182.7((For pleasant driving7

Cleaning
zPeriodically clean the read surface of the
disc. When cleaning, do not wipe in a
circular motion. Instead, wipe gently outwards from the centre of the disc to
the outer edge.
z New discs may have burring around the
outer edge or in the hole in the centre. Ensure you check for these. If there are
burrs, these may lead to faulty operation, therefore ensure these are removed.
Important Points on Storage
z When not using discs, ensure these are
kept in cases, and stored out of direct
sunlight.
z If discs are not going to be used for a
long period of time, remove these from
the product.
Disc Playback Environment
In cold environments such as in mid-winter when the interior of the vehicle is cold, turn-
ing the heater on and immediately trying to
use the product may cause condensation (wa- ter droplets) to form on the disc and internaloptical components, and this may prevent the
product from operating correctly.
In these conditions, remove the disc, and wait a short time before use.
Copyright
Actions such as unauthorized reproduction,
broadcast, public performance, or rental of discs that comprise other than personal use are prohibited by law.
Types of Disc That Can Be
Played
The following marks are printed on the disc
label, package, or jacket.
TypeSize
Maxi- mum
playing time
Comments
CD-DA12 cm74 mi-
nutes

zDepending on the disc, some functions
may not be used, or the disc may not be
played.
z Do not use discs with cracks or warps.
z If the disc has stickers affixed, remains
from removed stickers, or affixed adhe-
sive, then do not use the disc.
z Discs that have decorative labels or
stickers may not be used.
Nonstandard CDs
This product will play audio CDs, however, please be aware of the following points re- garding CD standards.
z Ensure that you use discs with
on the
label surface.
z Playback of other than standard CDs is
not guaranteed. Even if the audio can be played, the audio quality cannot be guar-
anteed.
z When playing other than standard CDs,
the following may occur.