Page 117 of 3641
AV-112
< SYMPTOM DIAGNOSIS >[DISPLAY AUDIO]
NORMAL OPERATING CONDITION
The other party’s voice cannot be heard by hands-free phone.When the radio wave condition is not ideal or ambient sound is too
loud, it may be difficult to hear the other person’s voice during a
call.
Poor sound quality. Do not place the cellular phone in an area surrounded by metal or
far away from the in-vehicle phone module to prevent tone quality
degradation and wireless connection disruption.
Symptom
Cause and Counter measure
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 118 of 3641
AV
AUDIO UNITAV-113
< REMOVAL AND INSTALLATION > [DISPLAY AUDIO]
C
D
E
F
G H
I
J
K L
M B A
O P
REMOVAL AND INSTALLATION
AUDIO UNIT
Exploded ViewINFOID:0000000012432977
Removal and InstallationINFOID:0000000012432978
REMOVAL
1. Remove the battery negative terminal. Refer to PG-70, "Removal and Installation (Battery)".
2. Remove cluster lid C. Refer to IP-22, "
Removal and Installation".
3. Remove the audio unit screws, the pull out the audio unit.
4. Disconnect the harness connectors from the audio unit and remove.
INSTALLATION
Installation is in the reverse order of removal.
1. Audio unit bracket (LH) 2. Audio unit 3. Audio unit bracket (RH)
AWNIA3579ZZ
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 119 of 3641
AV-114
< REMOVAL AND INSTALLATION >[DISPLAY AUDIO]
FRONT DOOR SPEAKER
FRONT DOOR SPEAKER
Removal and InstallationINFOID:0000000012432979
REMOVAL
1. Remove the front door finisher. Refer to
INT-15, "Removal and Installation".
2. Remove the front door speaker screws (A).
3. Disconnect the harness connector from front door speaker (1) and remove.
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3062ZZ
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 120 of 3641
AV
REAR DOOR SPEAKERAV-115
< REMOVAL AND INSTALLATION > [DISPLAY AUDIO]
C
D
E
F
G H
I
J
K L
M B A
O P
REAR DOOR SPEAKER
Removal and InstallationINFOID:0000000012432980
REMOVAL
1. Remove the rear door finisher. Refer to INT-18, "Removal and Installation".
2. Remove the rear door speaker screws (A).
3. Disconnect the harness connector from the rear door speaker (1) and remove.
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3089ZZ
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 121 of 3641
AV-116
< REMOVAL AND INSTALLATION >[DISPLAY AUDIO]
USB INTERFACE
USB INTERFACE
Removal and InstallationINFOID:0000000012432981
REMOVAL
1. Remove the center console assembly. Refer to
IP-18, "Removal and Installation".
2. Release the pawls (A) from the back of the center console assembly (2) using a suitable tool and remove the USB interface
(1).
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3069ZZ
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 122 of 3641
AV
AUXILIARY INPUT JACKAV-117
< REMOVAL AND INSTALLATION > [DISPLAY AUDIO]
C
D
E
F
G H
I
J
K L
M B A
O P
AUXILIARY INPUT JACK
Removal and InstallationINFOID:0000000012432982
REMOVAL
1. Remove the center console assembly. Refer to IP-18, "Removal and Installation".
2. Release the pawls (A) from the back of the center console assembly (2) using a suitable tool and remove the auxiliary input
jack (1).
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3069ZZ
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 123 of 3641
AV-118
< REMOVAL AND INSTALLATION >[DISPLAY AUDIO]
REAR VIEW CAMERA
REAR VIEW CAMERA
Removal and InstallationINFOID:0000000012432983
REMOVAL
1. Remove the back door outer finisher. Refer to
EXT-48, "Removal and Installation".
2. Disconnect the harness connector from rear view camera.
3. Remove the nuts (A) from the rear view camera and remove.
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3070ZZ
Revision: August 2015 2016 Versa Note
cardiagn.com
Page 124 of 3641
AV
BLUETOOTH® CONTROL UNITAV-119
< REMOVAL AND INSTALLATION > [DISPLAY AUDIO]
C
D
E
F
G H
I
J
K L
M B A
O P
BLUETOOTH® CONTROL UNIT
Removal and InstallationINFOID:0000000012432984
REMOVAL
1. Remove the luggage side lower finisher (RH). Refer to INT-34, "LUGGAGE SIDE LOWER FINISHER :
Removal and Installation".
2. Disconnect the harness connectors from the Bluetooth® control unit.
3. Remove the Bluetooth® antenna screws (A) and the Bluetooth® antenna (1).
4. Remove the Bluetooth® control unit bracket screws (A) and the Bluetooth® control unit (1).
5. Remove the Bluetooth® control unit screws (A) and separate the Bluetooth® control unit (1) from the bracket (2).
INSTALLATION
Installation is in the reverse order of removal.
AWNIA3095ZZ
AWNIA3122ZZ
AWNIA3097ZZ
Revision: August 2015 2016 Versa Note
cardiagn.com