2016 Citroen C4 PICASSO Owner's Manual

247
C4-Picasso-II_en_Chap06_securite_ed01-2016
Installation of child seats secured using the seat belt
In accordance with European regulations, this table indicates the options for installing child seats secured using the seat belt and universally approved (a )
  in   relation   to   the   weight   of   the   child   and   the   seat   in   the   vehicle.
Seat Weight of the child /
 

indicative   age
Groups 0 (b) and 0+ Bir th to 13 kg Group 1
From 9 to 18 kg Group 2
From 15 to 25 kg Group 3
From 22 to 36 kg
1
st row Front   passenger   seat   (
c )
- f ixed UUUU
-  
h
eight   adjustable U(R)U(R)U(R)U(R)
2
nd row Fixed   outer   rear   seats   (d)
UUUUOuter rear seats with
longitudinal a djustment (d ) ( e)U UUU
Centre rear seat ( d) UUUU
3
rd row Rear seats UUUU
6
Safety

248
C4-Picasso-II_en_Chap06_securite_ed01-2016
(a )   Universal   child   seat:   child   seat   which   can   be  i
nstalled   in   all   vehicles   using   the   seat   belt.
( b )
  
G
roup   0:   from   birth   to   10   kg.   Infant   car   seats  
a

nd "car cots" cannot be installed on the
front
  passenger   seat   or   in   the   3
rd row. When i
nstalled in the 2nd row, they may prevent
use
 
of
 
the
 
other
 
seats.
( c )
  
C

onsult
 
the
 
legislation   in   force   in   your  
c

ountry
 
before
 
installing   your   child   on   this  
sea

t.
( d )

T

o install a child seat on a rear seat,
rear ward
 
facing
 
or   for ward   facing,   move  
t

he
 
front
 
seat
 
for ward,   then   straighten   the  
b

ackrest
 
to
 
allow
 
enough   space   for   the   child  
s

eat
 
and
 
the
 
child's   legs.
( e )

T

o install a child seat on a rear seat,
rear ward
 
facing
 
or   for ward   facing,   adjust   the  
r

ear
 
seat
 
to
 
the
 
fully   back   position,   with   the  
b

ackrest
 
upright. Remove and stow the head restraint
before
  installing   a   child   seat   on   a  
p

assenger   seat.   Refit   the   head   restraint  
o

nce   the   child   seat   has   been   removed.
U
:   
s
eat   suitable   for   the   installation   of   a   child  
s

eat   secured   using   the   seat   belt   and  
u

niversally   approved   rear ward   facing   and/
or   for ward   facing,   with   the   passenger   seat  
a

djusted   to   the   midway   longitudinal   position.
U(R) :   s ame   as   U
,   with   the   passenger's  s
eat   adjusted   to   the   low   position  
w

ith 11 actions   on   the   height   control   lever  
a

nd   in   the   midway   longitudinal   position.
Safety

249
C4-Picasso-II_en_Chap06_securite_ed01-2016
"ISOFIX" mountings
Your vehicle has been approved in accordance with the latest ISOFIX regulations .
The   seats,   represented   below,   are   fitted   with   regulation   ISOFIX   mountings:
-
 
t
wo   rings   A, located between the vehicle
seat
  backrest   and   cushion,   indicated   by   a  
m

arking, -

a ring B,   located   under   a   cover   on   the   back  o
f   the   top   of   the   seat   backrest,   referred   to   as  
t

he TOP TETHER   for   fixing   the   upper   strap.
 Its  position   is   indicated   by   a   marking.
Located   on   the   back   of   the   seat   backrest,   the  
T

OP TETHER is used to secure the upper strap
of
  child   seats   that   have   one.   This   device   limits  
f

or ward   tipping   of   the   child   seat,   in   the   event   of  
a

  front   impact. The incorrect installation of a child seat
in
  a   vehicle   compromises   the   child's  
p

rotection   in   the   event   of   an   accident.
Observe
  strictly   the   fitting   instructions  
p

rovided   with   the   child   seat.
For information on the possibilities
for
  fitting   ISOFIX   child   seats   to   your  
v

ehicle,   refer   to   the   table   of   seating  
p

ositions.
The ISOFIX mountings are three rings for each seat:
This ISOFIX mounting system ensures fast, reliable   and   safe   fitting   of   the   child   seat   in   your  
v

ehicle.
The ISOFIX child seats are fitted with two
latches which are secured easily on the two
rings
 A .
S

ome also have an upper strap which is
attached
  to   ring   B. To secure the child seat to the TOP TETHER
:
-
r
emove and stow the head restraint before
installing   the   child   seat   on   this   seat   (refit   it  
a

fter the child seat has been removed),
-
r
emove the TOP TETHER   cover   by   pulling  
a

t its cut-out,
-
p
ass the child seat strap behind the seat
backrest,   centred   between   the   holes   for   the  
h

ead restraint rods,
-  
s
ecure   the   upper   strap   fixing   to   the   ring   B,
-  
t
ighten   the   upper   strap.
6
Safety

250
C4-Picasso-II_en_Chap06_securite_ed01-2016
"RÖMER Baby- Safe Plus" and its ISOFIX base
(size
  category:   E)
Group 0+: from bir th to 13 kg
Installed
  rear ward   facing   using   an   ISOFIX  
b

ase
 
which   is   attached   to   the   rings   A.
The
 
base   has   a   support   leg,   adjustable   for  
h

eight,   which   sits   on   the   vehicle's   floor.
This child seat can also be secured with a
seat
 
belt.   In   this   case,   only   the   shell   is   used  
a

nd
 
attached   to   the   vehicle's   seat   by   the  
t

hree-point   seat   belt.
ISOFIX child seats recommended by CITROËN
CITROËN offers a range of ISOFIX child seats listed and type approved for your vehicle.
R efer   also   to   the   child   seat   manufacturer's   fitting   instructions   for   information   on   installing   and   removing   the   seat.
Baby P2C Mini and its ISOFIX base (size
 c

ategories:
 C
, D, E)
Group 0+: from bir th to 13 kg
Installed
  rear ward   facing   using   an   ISOFIX  
b

ase   which   is   attached   to   the   rings   A.
The
  base   has   a   support   leg,   adjustable   for  
h

eight,   which   sits   on   the   vehicle's   floor.
This seat can also be secured with a seat
belt.
In this case only the seat shell is used and is
attached
  to   the   vehicle's   seat   by   the   three-
point
  seat   belt."Baby P2C Midi" and its ISOFIX base
(size categories:
 D

, C, A, B, B1)
Group 1: from 9 to 18 kg
Installed
  rear ward   facing   using   an   ISOFIX  
b

ase   which   is   attached   to   the   rings   A.
The
  base   has   a   support   leg,   adjustable   for  
h

eight,   which   sits   on   the   vehicle's   floor.
This child seat can also be used for ward
facing.
This seat can not be secured with a seat
belt.
We recommend that you use the seat in the
rear ward
  facing   position   up   to   the   age   of  
3 ye

ars.
Safety

251
C4-Picasso-II_en_Chap06_securite_ed01-2016
Locations for installing ISOFIX child seats
In accordance with European Regulations, this table indicates the options for installing ISOFIX child seats on seats in the vehicle fitted with ISOFIX mountings.
In
  the   case   of   universal   and   semi-universal   ISOFIX   child   seats,   the   ISOFIX   size   category,   determined   by   a   letter   from   A to G, is indicated on the child
seat
  next   to   the   ISOFIX   logo. Weight of the child
  /   indicative   age
Less than 10 kg (group 0)
Up
  to   approx.  
6

monthsLess than 10 kg
(group 0)
Less than 13 kg (group 0+)
Up
  to   approx.   1   yearFrom 9 to 18 kg (group 1)
From
  approx.   1   to   3   years
Type of ISOFIX child seat Sleeper cot*rearward facing rearward facing forward facing
ISOFIX size categor y F G C D E C D A B B1
Front
 p

assenger
 sea
t Not ISOFIX
Outer
  rear   seats,   fixed IL- SU**IL- SUIL- SUX IUF / IL- SU
Outer
 r

ear
 s
eats,
 a
djustable
 l
ongitudinallyIL- SU**IL- SUIL- SUIUF / IL- SU
(1) IUF / IL- SU
Centre rear seat XIL- SU IL- SUIUF / IL- SU IUF / IL- SU
*
  
S
leeper   cots   cannot   be   fitted   to   the   front   passenger's   seat. **
  
T
he   ISOFIX   sleeper   cot,   secured   to   the   lower   rings   of   an   ISOFIX   seat,  
o

ccupies   the   full   width   of   the   rear   seats.
6
Safety

252
C4-Picasso-II_en_Chap06_securite_ed01-2016
I UF: seat suitable for the installation of an
ISOFIX U niversal seat, F or ward
  facing  
s

ecured   using   the   upper   strap   to   the   top  
t

ether   on   ISOFIX   seats.
IL- SU:

s
eat suitable for the installation of an
I sofix
  Semi- Universal
 sea

t
 ei
ther:
-
 
r
ear ward   facing   fitted   with   an   upper   strap  
o

r   a   support   leg,
-
 
f
or ward   facing   fitted   with   a   support   leg,
-

a s
leeper cot fitted with an upper strap or a
support
  leg.
Remove and stow the head restraint
before
  installing   a   child   seat   on   a  
p

assenger   seat.   Refit   the   head   restraint  
o

nce   the   child   seat   has   been   removed.
For more information on ISOFIX mountings

and
  in   particular   on   securing   the   upper   strap,  
r

efer   to   the   corresponding   section.
X:

s
eat not suitable for the installation of a
child
  seat   or   sleeper   cot   for   the   weight   group  
i

ndicated.
(1) :
  
T
he   outer   seat   in   row   2   must   be   adjusted  
t

o   3   notches   back   from   the   fully   for ward  
p

osition.
Safety

253
C4-Picasso-II_en_Chap06_securite_ed01-2016
Locations for installing ISOFIX child seats
In accordance with European Regulations, this table indicates the options for installing ISOFIX child seats on seats in the vehicle fitted with ISOFIX mountings.
In
  the   case   of   universal   and   semi-universal   ISOFIX   child   seats,   the   ISOFIX   size   category,   determined   by   a   letter   from   A to G, is indicated on the child
seat
  next   to   the   ISOFIX   logo.
*
  Sleeper   cots   cannot   be   fitted   to   the   front   passenger's   seat.**
  
A
n   ISOFIX   sleeper   cot,   secured   to   the   lower   rings   of   an   ISOFIX   seat,  
o

ccupies   the   full   width   of   the   rear   seats.
Weight of the child
  /   indicative   age
Less than 10 kg (group 0)
Up
  to   approx.  
6

monthsLess than 10 kg
(group 0)
Less than 13 kg (group 0+)
Up
  to   approx.   1   yearFrom 9 to 18 kg (group 1)
 

From   approx.   1   to   3   years
Type of ISOFIX child seat Sleeper cot*rearward facing rearward facing forward facing
ISOFIX size categor y F G C D E C D A B B1
Front
 p

assenger
 sea
t Not ISOFIX
Outer
  rear   seats,   fixed IL- SU**IL- SUIL- SUIUF / IL- SU IUF / IL- SU
Outer
 r

ear
 s
eats,
 a
djustable
 l
ongitudinallyIL- SU**IL- SUIL- SUIUF / IL- SU IUF / IL- SU
Centre rear seat XIL- SU IL- SUIUF / IL- SU IUF / IL- SU
Rear
  seat   in   the   3
rd row Not ISOFIX
6
Safety

254
C4-Picasso-II_en_Chap06_securite_ed01-2016
I UF: seat suitable for the installation of an
ISOFIX U niversal seat, F or ward
  facing  
s

ecured   using   the   upper   strap   to   the   top  
t

ether   on   ISOFIX   seats.
IL- SU:

s
eat suitable for the installation of an
I sofix
  Semi- Universal
 sea

t
 ei
ther:
-
 
r
ear ward   facing   fitted   with   an   upper   strap  
o

r   a   support   leg,
-
 
f
or ward   facing   fitted   with   a   support   leg,
-

a s
leeper cot fitted with an upper strap or a
support
  leg.
Remove and stow the head restraint
before
  installing   a   child   seat   on   a  
p

assenger   seat.   Refit   the   head   restraint  
o

nce   the   child   seat   has   been   removed.
For more information on ISOFIX mountings

and
  in   particular   on   securing   the   upper   strap,  
r

efer   to   the   corresponding   section.
X:

s
eat not suitable for the installation of a
child
  seat   or   sleeper   cot   for   the   weight   group  
i

ndicated.
Safety