2016 Citroen C4 PICASSO Owner's Manual

303
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
Dipped beam headlamps
(halogen model)
F Remove the protective plastic cover by pulling   the   tab.
F
 
P
ush   the   connector.
F
 
R
emove   the   bulb   and   change   it.
For reassembly, carry out these operations in
reverse
 o

rder.
Main beam headlamps
(halogen model)
F Turn the protective plastic cover to remove   it.
F
 
D
isconnect   the   connector.
F
 
R
elease   the   clips.
F
 
R
emove   the   bulb   and   change   it.
For reassembly, carry out these operations in
reverse
 o

rder.
8
In the event of a breakdown

304
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
The direction indicator bulb is located below
the  front   lamp.
F

T
urn the bulb holder a quarter turn anti-
clockwise.
F
 
R
emove   the   bulb   holder.
F
 
C
hange   the   failed   bulb.
For reassembly, carry out these operations in
reverse
 o

rder.
Direction indicators Front foglamps
F Unclip  the   finisher   by   pulling   at   the   top.
F  R emove   the   two   screws   to   remove   the   unit.
F
 
T
urn   the   bulb   holder   a   quarter   turn.
F
 
R
emove   the   bulb   holder.
F
 
C
hange   the   failed   bulb.
For reassembly, carry out these operations in
reverse
  order,   pressing   on   the   finisher   to   refit   it.
Faster
 
flashing
 
of
 
a
 
direction
 
indicator
 
w

arning
 
lamp
 
(left
 
or
 
right)
 
indicates
 
a
 
f

ailed
 
bulb
 
on
 
that
 
side.
Direction indicators (light
emitting diodes - LED)
For the replacement of this type of lamp,
contact a CITROËN dealer or a qualified
workshop.
In the event of a breakdown

305
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
You should contact a CITROËN dealer or a
qualified  workshop   for   the   replacement   of   the  
l

ight-emitting   diode   -   LED.
Door mirror spotlamps
Integrated direction indicator
side repeaters
You should contact a CITROËN dealer or a
qualified  workshop   for   the   replacement   of   these  
b

ulbs. 1.
D

irection indicators (PY21W amber)
.
2.
 S
idelamps   /   foglamps   (P21/5W)
.
Rear lamps
Light-emitting diodes -
LEDs
For replacement, contact a CITROËN
dealer
  or   qualified   workshop.
3.
 B

rake
 
lamps
 
/
 
sidelamps
 
(light-emitting
 d
iodes
 
-
 
LEDs).
4. R
eversing
 
lamps
 
(W16W).
5.
 D

irection
 
indicators
 
(PY21W).
Model with LED lamps
3. Sidelamps ( 5W5).
4. B rake   lamps   (P21/ W).
5.
 D

irection   indicators   (W Y16W).
6.
 R

eversing   lamps   (W16W).
Model with conventional bulb lamps
8
In the event of a breakdown

306
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
Lamps on the tailgate
Contact a CITROËN dealer or a
qualified  workshop   for   the   replacement  
o

f   reversing   lamp   and   direction   indicator  
b

ulbs.
Identify
 
the
 
failed
 
bulb.
F
 
O

pen
 
the
 
boot.
F
 
R

emove
 
the
 
access
 
cover.
F
 
R

emove
 
the
 
three
 
lamp
 
fixing
 
screws
 
A
.
F
 
D

isconnect
 
the
 
lamp
 
connector.
F

C

arefully remove the lamp from the outside
by
 
pressing
 
the
 
retaining
 
clip
 
B
.
F

T

urn the bulb holder a quarter of a turn
anti-clockwise   and   pull   the   bulb   out.
F
 
C

hange   the   bulb.
For reassembly, carry out these operations in
reverse
 o
rder.
Model with LED lamps
Model with conventional bulb lamps
In the event of a breakdown

307
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
1. Direction  indicators   (PY21W   amber).
2. S idelamps   /   foglamps   (P21/5W).
Rear lamps
3. Sidelamps  (light-emitting   diodes   -   LEDs).
4. B rake   lamps   (light-emitting   diodes   -   LEDs).
5.
 D

irection   indicators   (PY21W).
6.
 R

eversing   lamps   (light-emitting   diodes   -  
L

ED s).
Model with LED lamps
3. Sidelamps ( W5W).
4. B rake   lamps   /   sidelamps   (P21W).
5.
 D

irection   indicators   (W Y16W).
6.
 R

eversing   lamps   (W16W).
Model with conventional bulb lamps
Light-emitting diodes -
LEDs
For replacement, contact a CITROËN
dealer  or   qualified   workshop.
8
In the event of a breakdown

308
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
Lamps on the tailgateModel with LED lamps
Model with conventional bulb lamps
Identify
 
the
 
failed
 
bulb.
F
 
O

pen
 
the
 
boot.
F
 
R

emove
 
the
 
access
 
cover. F
 
R

emove
 
the
 
three
 
lamp
 
fixing
 
screws
 
A .
F
 
D

isconnect
 
the
 
lamp
 
connector.
F
 
C

arefully
 
r

emove
 
t

he
 
l

amp
 
f

rom
 
i

ts
 
h

ousing.
F

T

urn the bulb holder a quarter of a turn
anti-clockwise
 
and
 
pull
 
the
 
bulb
 
out.
F
 
C

hange
 
the
 
bulb.
For reassembly, carry out these operations in
reverse
 o

rder.
In the event of a breakdown

309
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
Direction indicator, sidelamp and
foglamp
Access is by passing a hand under the bumper.
F T urn the bulb holder a quarter of a turn and
pull
  it   out.
F
 
C
hange   the   bulb.
For reassembly carry out these operations in
reverse
 o

rder.
You can also contact a CITROËN dealer or a
qualified
  workshop   for   the   replacement   of   these  
b

ulbs. For the replacement of this type of lamp,
contact a CITROËN dealer or a qualified
workshop.
Third brake lamp (light emitting
diodes-LED)
Number plate lamps (W5W)
To refit, press on the lens to clip it in place.
F
I
nsert a thin screwdriver into one of the cut-
outs   in   the   lens.
F  
P
ush   it   outwards   to   unclip   it.
F  
R
emove   the   lens.
F  
C
hange   the   faulty   bulb.
8
In the event of a breakdown

310
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
Before changing a fuse:
F t he cause of the failure must be identified
and rectified,
F

a
ll electrical consumers must be switched
of f,
F

t
he vehicle must be immobilised with the
ignition
 o

ff,
F
 
i
dentify   the   failed   fuse   using   the   tables   and  
l

ayout   drawings   in   the   following   pages.
Changing a fuse
GoodFailed
The replacement of a fuse not shown in
the tables below may cause a serious
malfunction
  of   your   vehicle.   Contact  
a C

ITROËN dealer or a qualified
workshop. Tw e e z e r
Changing a fuse
The extraction tweezer is located in the d
ashboard f usebox c ompartment.
For
  access   to   it:
F
 
u
nclip   the   cover   by   pulling   at   the   top   right,  
t

hen left,
F
 
d
isengage   the   cover   completely,   by  
c

arefully   pulling   in   the   direction   indicated  
b

y the arrow,
F
 
r
emove   the   tweezer.
Access to the tools
To replace a fuse, you must:
F  u se   the   special   tweezer   to   extract   the   fuse  
f

rom   its   housing   and   check   the   condition   of  
it

s
 f
ilament.
F

a
lways replace the failed fuse with a fuse of
the
  same   rating   (same   colour);   using   a   fuse  
o

f   a   different   rating   could   cause   faults   (risk  
o

f   fire).
If
  the   fuse   fails   again   soon   after   replacement,  
h

ave   the   vehicle's   electrical   system   checked   by  
a

  CITROËN   dealer   or   a   qualified   workshop.
In the event of a breakdown