Page 208 of 527

206
C4-Picasso-II_en_Chap05_eclairage-visibilite_ed01-2016
Lighting control stalk
Main lighting
The various front and rear lamps of the vehicle
are designed to adapt the driver's visibility
p
rogressively according to the climatic
c
onditions:
-
s
idelamps, to be seen,
-
d
aytime running lamps to be more visible
d
uring the day,
-
d
ipped beam headlamps to see without
dazzling
o
ther
d
rivers,
-
m
ain beam headlamps to see clearly when
the
road is clear.
Additional lighting
Other lamps are provided to meet the
requirements of particular driving conditions:
-
r
ear
fo
glamps,
-
f
ront foglamps with cornering lighting,
-
d
irectional headlamps for improved
visibility
w
hen
c
ornering,
-
g
uide-me-home and welcome lighting to
f
acilitate access to the vehicle,
-
p
arking lamps as vehicle position markers.
Programming
The setting of some functions can be adjusted:
- a utomatic illumination of headlamps,
-
a
utomatic headlamp dipping,
-
g
uide-me-home lighting,
-
w
elcome lighting,
-
c
ornering lighting,
-
d
irectional
l
ighting.
In
some
weather
conditions
(e.g.
low
t
emperature or humidity), the presence
of
misting
on
the
internal
sur face
of
the
g
lass
of
the
headlamps
and
rear
lamps
i
s
normal;
it
disappears
after
the
lamps
h
ave
been
on
for
a
few
minutes.
Travelling abroad
Halogen headlamps
For motoring in countries that drive
o
n the other side of the road, it is
necessary
to adapt the adjustment of
t
he dipped beams so as to not dazzle
the
drivers of approaching vehicles.
C
ontact a CITROËN dealer or qualified
workshop.
Xenon headlamps
The
design of the dipped beam
h
eadlamps allows you to drive in a
country that drives on the other side
of the road, without the need for any
modification.
In the event of the failure of one or more
bulbs,
a
message
advises
you
to
check
t
he
lamp(s)
in
question.
Selection
and
control
of
the
various
front
and
rear
lamps
providing
the
vehicle's
lighting.
Lighting and visibility
Page 303 of 527

301
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
Changing a bulb
For H7 type bulbs with lugs... take care to observe their correct installation
so
as to ensure the best lighting
p
erformance.
Risk of electrocution
Xenon bulbs (D5S-25W) must be
replaced by a CITROËN dealer or a
qualified
w
orkshop.
Front lamps
Model with xenon headlamps
1. Directional dipped beam headlamps (D5S-25W).
2.
M
ain beam headlamps (H7-55W).
3.
D
aytime running lamps / sidelamps
(
6 light emitting diodes - LEDs).
4.
D
irection indicators
(
6 light emittng diodes - LEDs).
5.
F
ront foglamps (H11-55W).
Model with halogen headlamps
1. Dipped beam headlamps (H7-55W).
2. M ain beam headlamps (H7-55W).
3.
D
aytime
r
unning
lam
ps/sidelamps
(
4 light emitting diodes - LEDs).
4.
D
irection indicators (PW Y24W).
5.
F
oglamps
(
H11-55W). In
some weather conditions (e.g. low
t
emperature or humidity), the presence
of misting on the internal sur face of the
g
lass of the headlamps and rear lamps
i
s normal; it disappears after the lamps
h
ave been on for a few minutes.
Light- emitting diodes - LEDs
For replacement, contact a CITROËN dealer or
qualified w
orkshop.
8
In the event of a breakdown
Page 306 of 527
304
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
The direction indicator bulb is located below
the front lamp.
F
T
urn the bulb holder a quarter turn anti-
clockwise.
F
R
emove the bulb holder.
F
C
hange the failed bulb.
For reassembly, carry out these operations in
reverse
o
rder.
Direction indicators Front foglamps
F Unclip the finisher by pulling at the top.
F R emove the two screws to remove the unit.
F
T
urn the bulb holder a quarter turn.
F
R
emove the bulb holder.
F
C
hange the failed bulb.
For reassembly, carry out these operations in
reverse
order, pressing on the finisher to refit it.
Faster
flashing
of
a
direction
indicator
w
arning
lamp
(left
or
right)
indicates
a
f
ailed
bulb
on
that
side.
Direction indicators (light
emitting diodes - LED)
For the replacement of this type of lamp,
contact a CITROËN dealer or a qualified
workshop.
In the event of a breakdown
Page 307 of 527
305
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
You should contact a CITROËN dealer or a
qualified workshop for the replacement of the
l
ight-emitting diode - LED.
Door mirror spotlamps
Integrated direction indicator
side repeaters
You should contact a CITROËN dealer or a
qualified workshop for the replacement of these
b
ulbs. 1.
D
irection indicators (PY21W amber)
.
2.
S
idelamps / foglamps (P21/5W)
.
Rear lamps
Light-emitting diodes -
LEDs
For replacement, contact a CITROËN
dealer
or qualified workshop.
3.
B
rake
lamps
/
sidelamps
(light-emitting
d
iodes
-
LEDs).
4. R
eversing
lamps
(W16W).
5.
D
irection
indicators
(PY21W).
Model with LED lamps
3. Sidelamps ( 5W5).
4. B rake lamps (P21/ W).
5.
D
irection indicators (W Y16W).
6.
R
eversing lamps (W16W).
Model with conventional bulb lamps
8
In the event of a breakdown
Page 309 of 527
307
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
1. Direction indicators (PY21W amber).
2. S idelamps / foglamps (P21/5W).
Rear lamps
3. Sidelamps (light-emitting diodes - LEDs).
4. B rake lamps (light-emitting diodes - LEDs).
5.
D
irection indicators (PY21W).
6.
R
eversing lamps (light-emitting diodes -
L
ED s).
Model with LED lamps
3. Sidelamps ( W5W).
4. B rake lamps / sidelamps (P21W).
5.
D
irection indicators (W Y16W).
6.
R
eversing lamps (W16W).
Model with conventional bulb lamps
Light-emitting diodes -
LEDs
For replacement, contact a CITROËN
dealer or qualified workshop.
8
In the event of a breakdown
Page 311 of 527
309
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
Direction indicator, sidelamp and
foglamp
Access is by passing a hand under the bumper.
F T urn the bulb holder a quarter of a turn and
pull
it out.
F
C
hange the bulb.
For reassembly carry out these operations in
reverse
o
rder.
You can also contact a CITROËN dealer or a
qualified
workshop for the replacement of these
b
ulbs. For the replacement of this type of lamp,
contact a CITROËN dealer or a qualified
workshop.
Third brake lamp (light emitting
diodes-LED)
Number plate lamps (W5W)
To refit, press on the lens to clip it in place.
F
I
nsert a thin screwdriver into one of the cut-
outs in the lens.
F
P
ush it outwards to unclip it.
F
R
emove the lens.
F
C
hange the faulty bulb.
8
In the event of a breakdown