2015 LEXUS LS600H Owners Manual

952. Instrument cluster
2
Instrument cluster
LS600hL_U(OM50E41U)
◆Outside rear view mirrors (vehicles with BSM)
Warning lights inform the driver of ma lfunctions in the indicated vehicle’s
systems.
Warning lights
*1
(U.S.A.)
Brake system warning light
(  P. 4 9 3 )*1
Slip indicator ( P. 4 9 5 )
*1
(Canada)
Brake system warning light
( P. 4 9 3 )*1, 2Brake hold operated
indicator ( P. 495)
*1Charging system warning
light ( P. 4 9 4 )*1, 2
(U.S.A.)
Parking brake indicator
( P. 495)
*1
(U.S.A.)
Malfunction indicator
lamp ( P. 4 9 4 )*1, 2
(Canada)
Parking brake indicator
( P. 495)
*1
(Canada)
Malfunction indicator
lamp ( P. 4 9 4 )*1Brake system warning light
( P. 495)
*1SRS warning light
( P. 4 9 4 )Open door warning light
( P. 4 9 6 )

962. Instrument cluster
LS600hL_U(OM50E41U)
*1: These lights come on when the power switch is turned to ON mode to indicatethat a system check is being performed. They will go off after the hybrid system is
on, or after a few seconds. There may be a malfunction in a system if the lights do
not come on, or go off. Have the vehicle inspected by your Lexus dealer.
*2: The light flashes to indicate a malfunction.
*1
(U.S.A.)
ABS warning light
( P. 4 9 4 )Low fuel level warning light
( P. 4 9 6 )
*1
(Canada)
ABS warning light
( P. 4 9 4 )Seat belt reminder light
( P. 4 9 6 )
*1Electric power steering
system warning light
( P. 4 9 4 )*1Master warning light
( P. 4 9 6 )
*1, 2
(if equipped)
Pre-collision system warn-
ing light ( P. 495)*1
Tire pressure warning light
( P. 4 9 7 )

972. Instrument cluster
2
Instrument cluster
LS600hL_U(OM50E41U)
The indicators inform the driver of the operating state of the vehicle’s vari-
ous systems.
Indicators
Turn signal indicator
(  P. 2 2 7 )*1Brake hold standby indica-
tor ( P. 2 3 1 )
(U.S.A.)
Headlight indicator
( P. 2 3 4 )*1Brake hold operated indi-
cator ( P. 2 3 1 )
(Canada)
Tail light indicator
( P. 2 3 4 ) Cruise control “SET” indi-
cator (
P. 2 5 3 , 2 5 7 )
Headlight high beam indi-
cator ( P. 235) Cruise control indicator
(
 P. 2 5 3 , 2 5 7 )
Automatic High Beam
indicator ( P. 2 3 8 )
(if equipped)
Radar cruise control indi-
cator ( P. 2 5 7 )
Front fog light indicator
(  P. 2 4 3 )
(if equipped)
LKA (Lane-Keeping
Assist) indicator
( P. 2 7 3 )
“READY” indicator
(  P. 2 1 6 )
*1“HEIGHT HIGH” indica-
tor ( P. 2 8 7 )
EV indicator ( P. 7 8 )
*1, 2
Slip indicator ( P. 2 9 1 )
EV drive mode indicator
(  P. 2 2 1 )
*1VSC (Vehicle Stability
Control) OFF indicator
( P. 2 9 1 )
Snow mode indicator
(  225)
*1, 3
(if equipped)
Pre-collision system warn-
ing light ( P. 2 9 8 )

982. Instrument cluster
LS600hL_U(OM50E41U)
*1: These lights come on when the power switch is turned to ON mode to indicatethat a system check is being performed. They will go off after the hybrid system is
on, or after a few seconds. There may be a malfunction in a system if the lights do
not come on, or go off. Have the vehicle inspected by your Lexus dealer.
*2: The light flashes to indicate that the system is operating.
*3: The light comes on when the system is turned off. The light flashes faster than
usual to indicate that the system is operating.
*4: In order to confirm operation, the BSM ou tside rear view mirror indicators illumi-
nate in the following situations:
• When the power switch is turned to ON mode while the BSM main switch is set to ON.
• When the BSM main switch is set to ON while the power switch is in ON mode.
If the system is functioning correctly, the BSM outside rear view mirror indicators
will turn off after a few seconds.
If the BSM outside rear view mirror indicato rs do not illuminate or do not turn off,
there may be a malfunction with the system.
If this occurs, have the vehicle inspected by your Lexus dealer.
*1
(U.S.A.)
Parking brake indicator
(  P. 2 2 8 )
*4
(if equipped)
BSM (Blind Spot Monitor)
outside rear view mirror
indicators ( P. 3 0 8 )
*1
(Canada)
Parking brake indicator
( P. 2 2 8 )*1“A I R B A G O N /
OFF” indicator
( P. 5 5 )
CAUTION
■If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS warning light not come on
when you start the hybrid system, this co uld mean that these systems are not avail-
able to help protect you in an accident, wh ich could result in death or serious injury.
Have the vehicle inspected by your Lexus dealer immediately if this occurs.

992. Instrument cluster
2
Instrument cluster
LS600hL_U(OM50E41U)
When driving mode is in other than sport mode (P. 283)
When driving mode is in sport mode ( P. 283)
The units used on the speedometer and the tachometer may differ depending on
the target region.
Gauges and meters

1002. Instrument cluster
LS600hL_U(OM50E41U)
Engine coolant temperature gauge
Displays the engine coolant temperature
Hybrid System Indicator
Displays hybrid system output or regeneration level ( P. 1 0 3 )
ECO lamp and SPORT lamp
Changes colors or brightness according to driving mode or way of driving
( P. 1 0 3 )
Speedometer
Displays the vehicle speed
Fuel gauge
Displays the quantity of fuel remaining in the tank
Odometer/trip meter and trip meter reset switches
Multi-information display
Presents the driver with a variety of driving-related data ( P. 105)
Outside Temperature
Displays the outside temperature within the range of -40°F (-40°C) to 122°F
(50°C)
Odometer and trip meter display
Odometer:
Displays the total distance the vehicle has been driven
Tr i p m e t e r :
Displays the distance the vehicle has been driven since the meter was last reset.
Trip meters “A” and “B” can be used to record and display different distances inde-
pendently.
Shift position and shift range
Displays the selected shift position or selected shift range ( P. 2 2 3 )
Instrument panel light control switches
Tachometer
Displays the engine speed in revolutions per minute
1
2
3
4
5
6
7
8
9
10
11
12

1012. Instrument cluster
2
Instrument cluster
LS600hL_U(OM50E41U)
Switches the display
Resets the trip meter currently
displayed to “0”
The brightness of the instrument panel lights can be adjusted.
Darker
Brighter
Changing the odometer and trip meter display
Ty p e A
Ty p e B1
2
Instrument panel light control
1
2

1022. Instrument cluster
LS600hL_U(OM50E41U)
■The meters and display illuminate when
The power switch is in ON mode.
■Instrument panel brightness adjustment
●Meters:
The brightness level of the meters when the surroundings are bright (day mode)
and dark (night mode) can be adjusted in dividually. However, when in day mode,
adjusting the brightness level will also ch ange the brightness level of night mode.
●Clock, air conditioning temperature display and switch lights:
The brightness level of the clock, air conditioning temperature display and switch
lights are linked with the brightness level of meter night mode.
■Light dimmer control (Changing to night mode)
The brightness level of the meter, clock and air conditioning temperature display
lights will change to night mode only wh en the surroundings are dark and the tail
lights are on.
■Automatic adjustment of the brightness level of the meters
The brightness level of the meters will be adjusted automatically according to the
brightness of the surroundings detected by the light sensor. However, the brightness
level of the meters will not be adjusted automatically in the following conditions.
●Day mode: When the brightness of the meter is adjusted to the brightest manually
●Night mode: When the brightness of the meter is adjusted to the brightest or dark-
est manually