2015 LEXUS LS600H Owners Manual

5357-2. Steps to take in an emergency
7
When trouble arises
LS600hL_U(OM50E41U)
Stop the hybrid system. Set the parking brake and shift the shift lever to
P.
Remove the mud, snow or sand from around the rear wheels.
Place wood, stones or some other material under the rear wheels to
help provide traction.
Restart the hybrid system.
Shift the shift lever to D or R and release the parking brake. Then, while
exercising caution, depress the accelerator pedal.
■When it is difficult to free the vehicle
If the vehicle becomes stuck
Carry out the following procedures if the tires spin or the vehicle
becomes stuck in mud, dirt or snow:
Press to turn off TRAC.
1
2
3
4
5

5367-2. Steps to take in an emergency
LS600hL_U(OM50E41U)
CAUTION
■When attempting to free a stuck vehicle
If you choose to push the vehicle back and forth to free it, make sure the surround-
ing area is clear to avoid striking other vehicles, objects or people. The vehicle may
also lunge forward or lunge back suddenly as it becomes free. Use extreme cau-
tion.
■When shifting the shift lever
Be careful not to shift the shift leve r with the accelerator pedal depressed.
This may lead to unexpected rapid acceleration of the vehicle that may cause an
accident resulting in death or serious injury.
NOTICE
■To avoid damaging the transm ission and other components
●Avoid spinning the rear wheels and depressing the accelerator pedal more than
necessary.
●If the vehicle remains stuck even after these procedures are performed, the vehi-
cle may require towing to be freed.

537
Vehicle specifications8
LS600hL_U(OM50E41U)8-1. Specifications
Maintenance data (fuel, oil level, etc.)...................538
Fuel information..........................550
Tire information ........................... 553
8-2. Customization Customizable features ............ 564

538
LS600hL_U(OM50E41U)
8-1. Specifications
*1: Unladen vehicles
*2: Vehicles with 18-inch tires
*3: Vehicles with 19-inch tires
*4:5-seat models
*5:4-seat models
Maintenance data (fuel, oil level, etc.)
Dimensions and weight
Overall length205.1 in. (5210 mm)
Overall width73.8 in. (1875 mm)
Overall height*158.3 in. (1480 mm)
Wheelbase121.7 in. (3090 mm)
Tr e a d
Front63.6 in. (1615 mm)*2
63.4 in. (1610 mm)*3
Rear63.6 in. (1615 mm)*2
63.4 in. (1610 mm)*3
Vehicle capacity weight
(Occupants + luggage)825 lb. (375 kg)*4
660 lb. (300 kg)*5

5398-1. Specifications
8
Vehicle specifications
LS600hL_U(OM50E41U)
■Vehicle identification number
The vehicle identification number (VIN) is the legal identifier for your
vehicle. This is the primary ident ification number for your Lexus. It is
used in registering the ownership of your vehicle.
This number is stamped on the top le ft of the instrument panel and in
the engine compartment.
This number is also on the Certifi-
cation Label.
■Engine number
The engine number is stamped
on the engine block as shown.
Vehicle identification

5408-1. Specifications
LS600hL_U(OM50E41U)
Engine
Model5.0 L 8-cylinder (2UR-FSE)
Ty p e8-cylinder V type, 4-cycle, gasoline
Bore and stroke3.70  3.52 in. (94.0  89.5 mm)
Displacement303.2 cu. in. (4969 cm3)
Valve clearance
(engine cold)Automatic adjustment
Drive belt tensionAutomatic adjustment
Fuel
Fuel typePremium unleaded gasoline only
Octane Rating91 (Research Octane Number 96) or higher
Fuel tank capacity
(Reference)22.2 gal. (84 L, 18.4 Imp. gal.)
Electric motor (traction motor)
Ty p ePermanent magnet synchronous motor
Maximum output165 kW
Maximum torque221.3 ft•lbf (300 N•m, 30.6 kgf•m)
Hybrid battery (traction battery)
Ty p eNickel-Metal hydride battery
Vo l t a g e14.4 V/module
Capacity6.5 Ah (3HR)
Quantity20 modules
Overall voltage288 V

5418-1. Specifications
8
Vehicle specifications
LS600hL_U(OM50E41U)
*: The engine oil capacity is a reference quantity to be used when changing the
engine oil. Warm up the engine and turn off the hybrid system, wait more than 5
minutes, and check the oil level on the dipstick.
■Engine oil selection
“Toyota Genuine Motor Oil” is used in your Lexus vehicle. Use Lexus
approved “Toyota Genuine Motor Oil” or equivalent to satisfy the fol-
lowing grade and viscosity.
Oil grade: ILSAC GF-5 multigrade engine oil
Lubrication system
Oil capacity
Drain and refill (Reference
*)
With filter
Without filter
9.5 qt. (9.0 L, 7.9 Imp. qt.)
8.9 qt. (8.4 L, 7.4 Imp. qt.)

5428-1. Specifications
LS600hL_U(OM50E41U)
Recommended viscosity: SAE 0W-20
SAE 0W-20 is the best choice
for good fuel economy and good
starting in cold weather.
If SAE 0W-20 is not available,
SAE 5W-20 oil may be used.
However, it must be replaced
with SAE 0W-20 at the next oil
change.
Oil viscosity (0W-20 is explained here as an example):
• The 0W in 0W-20 indicates the ch aracteristic of the oil which allows
cold startability. Oils with a lower value before the W allow for easier
starting of the engine in cold weather.
• The 20 in 0W-20 indicates the visc osity characteristic of the oil
when the oil is at high temperature. An oil with a higher viscosity (one
with a higher value) may be better su ited if the vehicle is operated at
high speeds, or under extreme load conditions.
How to read oil container label:
The International Lubricant
Specification Advisory Commit-
tee (ILSAC) Certification Mark is
added to some oil containers to
help you select the oil you should
use.
Outside temperature