2014 MITSUBISHI OUTLANDER SPORT warning

Turn-signal lever
Instruments and controls 6-45
6
E00506502645
E00506602024
Use the hazard warning flasher switch whenthe vehicle has to be parked on the road forany emergency.The hazard warning flashers can always beoperated, regardless of the operation mode.Push the switch to turn on the hazard warningflashers, all turn signal lamps flash continu-ously. To turn them off, push the switchagain.
Tu r n - s i g n a l l e v e r 1- Turn-signals
When making a normal turn, use position(1). The lever will return automaticallywhen cornering is completed.
2- Lane-change signals
When moving the lever to (2) slightly tochange a lane, the turn-signal lamps andindicator lamp in the instrument clusterwill only flash while the lever is oper-ated.Also, when you move the lever to (2)slightly then release it, the turn-signallamps and indicator lamp in the instru-ment cluster will flash three times.
NOTE
zIf the lamp flashes unusually quickly, thebulb in a turn-signal lamp may have burnedout. We recommend you to have the vehicleinspected.zIt is possible to activate the following func-tions:•Flashing of the turn-signal lamps when thelever is operated with the operation mode isin ACC.•Deactivate the turn-signal lamp 3-flashfunction for lane changes•The time required to operate the lever forthe 3-flash function can be adjusted.For further information, we recommend youto consult a MITSUBISHI MOTORSAuthorised Service Point.On vehicles equipped
with Mitsubishi Multi-
Communication System (MMCS), screenoperations can be used to make the adjust-ment. Refer to the separate owner’s manualfor details.zIt is possible to change the tone of a sound-ing buzzer as the turn-signal lamps flash.Refer to “Changing the turn-signal sound”on page 6-20.
Hazard warning flasher switch
NOTE
zIf the switch is used for a long period whilethe ready indicator is not illuminated, theauxiliary battery coul
d go flat and the Plug-
in Hybrid EV System could be impossible tostart.
BK0203201EN.book 45 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

ECO mode switch6-46 Instruments and controls
6
E00531801049
ECO mode is an eco-driving support systemwhich automatically controls the Plug-inHybrid EV System and air conditioning sys-tem to improve fuel efficiency.Refer to “Automatic climate control air con-ditioner” on page 8-4.The ECO mode starts working by pressingthe ECO mode switch when operation modeof the power switch is in ON. Push the switchagain and the ECO mode will cancel.While the ECO mode is working, an ECOmode indicator will be turned on.
E00506700034E00508301741
The front fog lamps can be operated while theheadlamps or tail lamps are on. Turn the knobin the “ON” direction to turn on the front foglamps. An indicator lamp in the instrumentcluster will also come on. Turn the knob inthe “OFF” direction to turn off the front foglamps. The knob will automatically return toits original position when you release it.
zOn vehicles equipped with the emergencystop signal system, while the hazard warninglamps are blinking due to having manuallypushed the switch, the emergency stop signalsystem does not operate.Refer to “Emergency stop signal system” onpage 7-29.
ECO mode switch
NOTE
NOTE
zEven if the ECO mode is operating, you canselect normal operation of the air condi-tioner.For further informati
on, we recommend you
to consult a MITSUBISHI MOTORSAuthorised Service Point.On vehicles equipped
with Mitsubishi Multi-
communication System (MMCS), it is possi-ble to change the setting by means of screenoperations.Refer to the separate owner’s manual fordetails.
Fog lamp switch Front fog lamp switch LHD/RHD (Type 1)
BK0203201EN.book 46 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

7
Starting and drivingEconomical driving ...........................................................................7-2Driving, alcohol and drugs ...............................................................7-2Floor mat *........................................................................................ 7-3Safe driving techniques..................................................................... 7-4Parking brake .................................................................................... 7-4Parking .............................................................................................. 7-5Steering wheel height and reach adjustment..................................... 7-6Inside rear-view mirror .....................................................................7-6Outside rear-view mirrors .................................................................7-7Power switch ...................................................................................7-10Starting and stopping the Plug-in Hybrid EV System .................... 7-12Selector Lever (Joystick Type) .......................................................7-14Select Position indicator .................................................................7-15Electrical Parking switch ................................................................7-16Regenerative braking level selector (paddle) * ..............................7-17S-AWC (Super All Wheel Control) ................................................7-184-wheel drive operation ..................................................................7-20Inspection and maintenance following rough road operation.........7-21Cautions on the handling of 4-wheel drive vehicles.......................7-22Battery save switch .........................................................................7-22Battery charge switch......................................................................7-23Acoustic Vehicle Alerting System (AVAS) ...................................7-24Braking ...........................................................................................7-26Hill start assist.................................................................................7-27Brake assist system .........................................................................7-28Emergency stop signal system * .....................................................7-29Anti-lock brake system (ABS)........................................................7-29Electric power steering system (EPS).............................................7-32
Active stability control (ASC) ........................................................ 7-32Cruise control * .............................................................................. 7-35Speed Limiter * .............................................................................. 7-39Adaptive Cruise Control System (ACC) * ..................................... 7-43Forward Collision Mitigation System (FCM) * ............................. 7-55Lane Departure Warning (LDW) *................................................. 7-60Reversing sensor system *.............................................................. 7-63Rear-view camera * ........................................................................ 7-67Cargo loads ..................................................................................... 7-70Towing caravans and trailers .......................................................... 7-71
BK0203201EN.book 1 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Parking
Starting and driving 7-5
7
E00600602645
To p a r k t h e v e h i c l e , f u l l y e n g a g e t h e p a r k i n gbrake, and then press the electrical parkingswitch to lock the wheels.To p r e v e n t t h e v e h i c l e f r o m r o l l i n g , f o l l o wthese procedures:Turn the front wheels towards the kerb andmove the vehicle forward until the kerb sidewheel gently touches the kerb.Apply the parking brake and press the electri-cal parking switch.If necessary, apply chocks to wheels.Turn the front wheels away from the kerb andmove the vehicle back until the kerb sidewheel gently touches the kerb.Apply the parking brake and press the electri-cal parking switch.If necessary, apply chocks to wheels.
NOTE
zApply sufficient force to the parking brakelever to hold the vehicle stationary after thefoot brake is released.zIf the parking brake does not hold the vehiclestationary after the foot brake is released,have your vehicle checked immediately.
To r e l e a s e 1- Firmly depress and hold the brake
pedal, then pull the lever up slightly.
2- Push the button at the end of hand grip.3- Lower the lever fully.
CAUTIONzBefore driving, be sure that the parkingbrake is fully released and brake warninglamp is off.If you drive without the parking brake fullyreleased, the warning display will appear onthe information screen in the multi informa-tion display and a buzzer sound when thevehicle speed exceeds 8 km/h.If a vehicle is driven without releasing theparking brake, the brake will be overheated,resulting in ineffectiv
e braking and possible
brake failure.Wa r n i n g l a m pWa r n i n g d i s p l a yzIf the brake warning lamp does not extin-guish when the parking brake is fullyreleased, the brake system may be an abnor-mal.Have your vehicle
checked immediately.
For details, refer to “Brake warning lamp”on page 6-37.
Parking Parking on a hill Parking on a downhill slope Parking on an uphill slope
BK0203201EN.book 5 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Power switch7-10 Starting and driving
7
E00631801079
In order to prevent theft, the Plug-in HybridEV System will not start unless a preregis-tered keyless operation key is used. (Immobi-lizer function)If you are carrying the keyless operation key,you can start the Plug-in Hybrid EV System.
The indicator lamp on the power switch turnsoff.The operation mode cannot be put in OFFunless the electrical parking switch ispressed.Electrical devices such as the audio andaccessory socket can be operated. Can beused when the Ready indicator is off.The indicator lamp on the power switch illu-minates orange.All vehicle’s electrical devices can be oper-ated.The indicator lamp on the power switch illu-minates blue. The indicator lamp turns offwhen the Plug-in Hybrid EV System is oper-ating.
NOTE
zThe heater mirrors can be turned on automat-ically.For further information, we recommend youto consult a MITSUBISHI MOTORSAuthorised Service Point. On vehiclesequipped with Mitsubishi Multi-Communi-cation System (MMCS), screen operationscan be used to make the adjustment. Refer tothe separate owner’s manual for details.
Power switch
CAUTIONzThe indicator lamp (A) will flash orangewhen there is a problem or malfunction inthe keyless operation system. Never drive ifthe indicator lamp on the power switch isflashing orange. Immedi
ately contact a MIT-
SUBISHI MOTORS Authorised ServicePoint.zIf the power switch operation is not smoothand feels like it is stic
king, do not operate the
switch. Immediately contact a MITSUBISHIMOTORS Authorised Service Point.NOTE
zWhen operating the power
switch, press the
switch all the way in. If the switch is notfully pressed, the Plug-
in Hybrid EV System
may not start or the operation mode may notchange. If the power
switch is pressed cor-
rectly, there is no n
eed to hold the power
switch down.zWhen the battery in the keyless operationsystem key has worn
out, and taking the key-
less operation key out of the vehicle, a warn-ing lamp will blink fo
r 5 seconds or warning
display will appear.
Operation mode of the power switch and its function OFFACCON
BK0203201EN.book 10 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Starting and stopping the Plug-in Hybrid EV System7-12 Starting and driving
7
When the operation mode is in any modeother than OFF, if you close all the doors andthe tailgate then try to lock the doors and tail-gate by pressing the driver’s or front passen-ger’s dppr lock/unlock switch, or the tailgateLOCK switch, a warning display will appear,and the outer buzzer will sounds and you can-not lock the doors and tailgate.
E00632301042
If the driver’s door is opened with the Plug-inHybrid EV System stopped and the operationmode in any mode other than OFF, the opera-tion mode ON reminder inner buzzer soundsintermittently to remind you to put the opera-tion mode in OFF.
E00620601295E00620701443
1. Check that the EV charging cable is notconnected to your vehicle.2. Fasten the seat belt.3. Make sure the parking brake is applied.4. When you press the power switch whiledepressing the brake pedal with your rightfoot, the READY indicator in the meterblinks and the activation of Plug-inHyblid EV System starts.
5. When the READY indicator changesfrom blinking to staying on, the startup ofPlugin-Hyblid EV System is activated andthe vehicle is now ready to drive.
E00620801268
1. Stop your vehicle completely.
Operation mode ON reminder system
Starti ng and sto pping th e Plug-in Hybrid EV System Star ting the Plug- in Hybrid EV System
CAUTIONzWhen the Plug-in Hybrid EV System warn-ing lamp comes on while the READY indi-cator is on, avoid high-speed driving andhave your vehicle inspected by a MITSUBI-SHI MOTORS Authorised Service Point assoon as possible. (Refer
to “Plug-in Hybrid
EV System warning lamp” on page 6-39.)zNever attempt to start the engine by pushingor pulling the vehicle.
CAUTIONzDo not press the power
switch while holding
the select lever at the operated position.NOTE
zContinue to depress th
e brake pedal until the
READY indicator in the meter stays on.zYo u c a n d r i v e y o u r v e h i c l e e v e n i f t h e e n g i n eis stopped.zPlug-in Hybrid EV System can be started inany operation mode.zIf the READY indicator does not come on,check the select position indicator. If theindicator is not indicating "P", press the elec-trical parking switch
to display "P" position.
zIf the READY indicator does not come on,turn the power switch to OFF once and, aftera while, press the power switch to start Plug-in Hybrid EV System.
St o pp i ng t h e P l u g - i n H y b r i d EV System
BK0203201EN.book 12 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Starting and stopping the Plug-in Hybrid EV System
Starting and driving 7-13
7
2. Apply the parking brake firmly whiledepressing the brake pedal.3. After pressing the electrical parkingswitch, press the power switch to stopPlug-in Hybrid EV System. (Refer to“Electrical Parking switch” on page 7-16,)
E00632901022
Insert the keyless operation key into the keyslot. Starting the Plug-in Hybrid EV Systemand changing the operation mode should benow possible. Remove the keyless operation key from thekey slot after starting the Plug-in Hybrid EVSystem or changing the operation mode.
E00633001046
WA R N I N GzNever stop Plug-in Hybrid EV Systemduring running except in emergency. Theeffectiveness of the brake becomes verypoor and the steering wheel becomes veryheavy, which can easily lead to an acci-dent.NOTE
zDo not operate the pow
er switch during run-
ning except in emergency. If you have to stopPlug-in Hybrid EV System in emergencyduring running, continue
to press the power
switch for three seconds or longer or pressthe power switch three times or morequickly. Plug-in Hybrid EV System stops,the operation mode turns to ACC, and theselector lever position shifts to the “P” posi-tion at very slow speed.zIf you press the power switch when theselector lever position is other than “P” posi-tion while your vehicle is stopped, the selec-tor lever position automatically shifts to “P”position, Plug-in Hybrid EV System stops,and the power mode turns to “OFF”.
zIf the parking lock mechanism is faulty, awarning is displayed on the informationscreen in the multi-information display.When this warning is displayed, Plug-inHybrid EV System ca
nnot be stopped unless
you apply the parking brake and then pressthe power switch. Park on a flat place withthe parking brake securely applied. Haveyour vehicle inspected by a MITSUBISHIMOTORS Authorised Service Point.
If the keyless operation key is not operating properly
NOTE
NOTE
zDo not insert into the
key slot a
nything other
than the keyless operation key. This couldcause damage or a malfunction. zRemove the object or additional key from thekeyless operation key before inserting thekey into the key slot. The vehicle may not beable to receive the registered ID code fromthe registered key. Therefore, the Plug-inHybrid EV System may not start and theoperation mode may not change.
Keyless operation key reminder
BK0203201EN.book 13 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Selector Lever (Joystick Type)7-14 Starting and driving
7
If the operation mode is in OFF and thedriver’s door is opened with the keyless oper-ation key in the key slot, the outer buzzersounds for approximately 3 seconds and theinner buzzer sounds for approximately 1 min-ute or warning display will appear to remindyou to remove the key.
E00636100054
E00636200026
Operate the selector lever slowly and securelyin the following method.˙ (home position) to “D” or “R”: Simply shiftthe lever.˙ (home position) to “N”: Shift and hold at“N” position for a while.˙ (home position) to “B”: You can shift theselector lever to “B” only when the selectposition is in “D” position.When shifted from
˙ (home position) to “B”,
the regenerative brake force will increase byone step.When shifted to “B” once again, the regener-ative brake force will become the maximum.When you shift the selector lever to “D”, theselect position returns to “D”.
The selector lever always returns to its homeposition when it is released.
Selector Lever (Joystick Ty p e )
Selector lever operation
(home position)
NOTE
zIf you operate the select lever to (B) twicetoo quickly, the regenerative brake force maynot become the maximum.WA R N I N GzDo not replace the selector lever knobother than MITSUBISHI MOTORS genu-ine part. In addition, do not hang anobject on the selector
lever as it may be a
cause of an accident.zWhen you shift the selector lever to “D” or“R” position, always
depress the brake
pedal with your right foot for your safety.Never shift the lever while depressing theaccelerator pedal. Doing so will start yourvehicle abruptly, which
may lead to a seri-
ous accident. It may also be a cause of fail-ure of vehicle.NOTE
zYo u c a n n o t o p e r a t e t h e r e g e n e r a t i v e b r a k ewhile the adaptive cruise control system(ACC) is operating.zEvery time operating the selector lever, besure to check the position displayed on theindicator.
BK0203201EN.book 14 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分