2013 MERCEDES-BENZ SL-Class key

list. In this case, start a new search to
update the Bluetooth
®
telephone list.
Authorizing (registering) amobile phone Passkey entry
Telephone basic menu
Option 1: using the passkey (access code)
X
Select the mobile phone usin gthe 000D
symbol in the Bluetooth ®
telephone list by
turning 003E0012003Fthe COMAND controller and
press 0039to confirm.
The input menu for the passkey appears.
The passkey is any one to sixteen-digit
number combination which you can choose
yourself. You must enter the same number
combination in COMAND and in the
Bluetooth ®
-capable mobile phone (see the
mobile phone operating instructions).
i Some mobile phones require a passkey
with four or more digits.
i If you want to reauthorize a mobile phone
following de-authorization, you can select
a different passkey. i
Mercedes-Ben zrecommends de-
authorization in COMAND and on the
mobile phone ( Ypage 382). Subsequent
authorization may otherwise fail.
X To enter the passkey in COMAND: press
the number keys one after the other.
or
X Select the digits in the digit bar one by one
by turning 003E0012003Fthe COMAND controller
and press 0039to confirm.
0004 is highlighted after the first number
has been entered.
X In both cases, select 0004and press 0039to
confirm.
X To enter the passkey on the mobile
phone: if the Bluetooth ®
connection is
successful, you will be requested to enter
the passkey (access code, passcode; see
the mobile phone operating instructions).
X Enter the same passkey in the mobile
phone as the one already entered in
COMAND.
The message Connecting Bluetooth Profiles... appears.
The Authorization successful message appears once authorization is
completed.
The mobile phone is connected to COMAND
(authorized). You can now make phone calls
using the COMAND hands-free system.
i After entering the passkey, you may also
need to enter a confirmation in your mobile
phone to connectc alls. Please check your
mobile phone display. On som emobile
phones, this confirmation can be saved. In
this case, you do not need to enter it again.
If the COMAND display shows the
Authorization failed message, you
may have exceeded the prescribed time
period. Repeat the procedure. 380
TelephoneCOMAND

Option 2: use Secure Simple Pairing
The mobile phone (or the Bluetooth
®
audio
device) must support the Bluetooth ®
version
2.1 for connection via Secure Simple Pairing.
COMAND creates a six-digit code, which is
displayed on both devices that are to be
connected.
X If the code is the same on both devices,
confirm Yes by pressing
0039.
If you select Yes , the authorization process
is completed and the mobile phone is
connected.
If you select No , the process will be
canceled.
X Confirm the message on the mobile phone.
External authorization If COMAND does not detect your mobile
phone, this may be due to particular security
settings on your mobile phone. In this case,
you can test if your mobile phone can find
COMAND .The Bluetooth ®
device name of
COMAND is "MB Bluetooth ".Please note the following:
some mobile
phones require that you establish the
connection to COMAND again once you have
entered the passkey (see the mobile phone
operating instructions). The mobile phone
cannot otherwise be authorized.
X Press the 0012function button on
COMAND.
X Select Connect Dev. in the telephone
basic menu by sliding 0012000Aand turning
003E0012003F the COMAND controller and press
0039 to confirm.
The Bluetooth ®
telephone list appears.
X Select Connect via Phone and press
0039
to confirm.
The message on the left appears.
X Start the Bluetooth ®
search on the mobile
phone; see the mobile phone operating
instructions.
X Select COMAND (MB Bluetooth ) on the
mobile phone.
X Option 1: when requested to do so, enter
the passkey first on the mobile phone and
then in COMAND.
X Option 2: confirm the displayed codes on
the mobile phone and in COMAND (Secure
Simple Pairing).
With both options, you see the prompt Do you want to be
authorized? on the COMAND display.
X If you select Yes , the mobile phone will be
authorized. The messages Waiting for a Connection to dev.>... and
Connecting Bluetooth Profiles... are displayed. If the
connection is successful, you see the
telephone basic menu and the connected
mobile phone is entered.
If you select No , the process will be aborted.
Switching between mobile phones
If you have authorized more than one mobile
phone, you can switch between the individual
phones. Telephone
381COMAND Z

X
Select Reception Volume or
Transmission Volume and press
0039to
confirm.
X Select a volume setting by turning 003E0012003Fthe
COMAND controller.
X To close the setting scale: press0039or
slide 003600120037.
i Incorrect settings may have an impact on
the quality of calls. Using the telephone
Incoming call Accepting
acall Example: incoming call
X
To accept: confirmAccept by pressing
0039.
or
X Press the 0017button on COMAND or on
the multifunctio nsteering wheel.
i You can also accep tthe call by voice
command using the Voice Control (see the
separate operating instructions).
Once you have accepted the call, you can use
hands-free mode.
The call volume can be adjusted
(Y page 295).
Other functions during a call (Y page 385).
If the phone number of the caller is
transferred, it appears in the display.
If an entry for the caller exists in the phone
book, you will also see the name. If the phone number is not transferred or if
the "Hide data" function is active,
Unknown is
shown in the display.
i You can also accept a call as described
above when another main function is
switched on in COMAND. Once you have
accepted the call, the display switches to
telephone mode. After the call is finished,
you see the display of the previous main
application again.
The display does not switch to telephone
mode if you:
R press the 001Fback button next to the
COMAND controller and then
R accept the call using the 0017button on
the multifunction steering wheel
Rejecting acall
X To reject: selectReject by turning
003E0012003F
the COMAND controller and press 0039to
confirm.
or
X Press the 003Cbutton on COMAND or on
the multifunctio nsteering wheel.
Making a call Using the number keypad
X
Call up the telephone basi cmenu
(Y page 383).
X Enter the digits using the number keypad.
X To connect the call: press the0017
button on COMAND or on the multifunction
steering wheel.
Using the telephone basic menu
X Call up the telephone basic menu
(Y page 383).
X Select the digits one by one by turning
003E0012003F and sliding 00380012000Athe COMAND
controller and press 0039to confirm. 384
TelephoneCOMAND

X
To make a call: select°in the character
ba ra nd press 0039to confirm.
or
X Press the 0017button on COMAND or on
the multifunctio nsteering wheel.
Redialing
X Call up the telephone basi cmenu
(Y page 383).
X Select °in the character bar and press
0039 to confirm.
or
X If the telephone basic menu is displayed,
press the 0017button on COMAND.
In both cases, the calls dialed list appears.
The most recently dialed number is at the
top.
X To select acall: turn 003E0012003F the COMAND
controller.
X To connect the call: press0039the
COMAND controller.
Using the call lis torCOMAND phone book
X Open a call list and select an entry
(Y page 392).
or
X Call up the COMAND phone book and
select an entry (Y page 389).
X To make a call: press0039the COMAND
controller or the 0017button.
Making a call via speed dial
The speed dial list contains stored entries
from the phone book (Y page 394).
Option 1:
X Hold down one of the number keys for
longer than two seconds.
The telephone basic menu displays the
selected entry. This initiates dialing. Option 2:
X
Call up the telephone basic menu
(Y page 383).
X Select Call Lists by sliding
0012000Aand
turning 003E0012003Fthe COMAND controller and
press 0039to confirm.
Am enu appears.
X Select Speed Dial Preset List by
turning 003E0012003Fthe COMAND controller and
press 0039to confirm.
The speed dial list appears.
X Select preset and press 0039to confirm.
The telephone basic menu displays the
selected entry. This initiates dialing.
Functions available during acall Overview
Telephone operatio
nwith a single call
0002 Perso nyou are calling
0003 Icon for active telephone connection
0027 To switch the hands-free microphone off/
on (Y page 386)
0026 To send DTMF tones (not possible with all
mobile phones) (Y page 386)
0024 To end a call
Available functions:
R accepting a waiting call (Y page 386)
R making a further call (Y page 387)
R toggling (Y page 387)
Availability depends on the network (only
possible in the GSM network) and on the
Bluetooth ®
mobile phone. Telephone
385COMAND Z

Switching the hands-free microphone on/
off
This function is also available during an active
phone call.
X
Call up the telephone basic menu
(Y page 383).
X To switch off: selectMic Off and press
0039 to confirm.
If the microphone is switched off, the
display shows the 000Csymbol and the The microphone is off message appears for
a short period.
X To switch on: selectMic On and press
0039 to confirm.
The 000Csymbol disappears. You will briefly
see the The microphone is on message.
Sending DTMF tones This function is not supported by all mobile
phones.
Answering machines or other devices can be
controlled by DTMF tones, e.g. for remote
query functions.
X If you would like to listen to the messages
on your answering machine, for example,
dial the corresponding number.
X To transmit individual characters: once
a connection has been established to the
answering machine, select the desired characters in the character bar, pressing
0039
to confirm each of them.
or
X Press the corresponding key on the
COMAND number keypad.
Every character selected will be
transmitted immediately.
X To send a phone book entry as a DTMF
sequence: selectName by turning
003E0012003Fthe
COMAND controller and press 0039to
confirm.
X Select the desired phone book entry and
press 0039to confirm.
The entry is sent as a DTMF character
string.
X To return to the call display: select
Back and press
0039to confirm.
i You can also send DTMF tones using the
Voice Control system; see the separate
operating instructions.
Calls with several participants Rejecting or accepting
awaiting call
The mobile phone network provider must
support and activate the call-waiting function.
Depending on the mobile phone used, the
system behavior differs whe naccepting a
call.
If you have a call in progress and receive
another call, a new window appears in the
display .You also hear a tone. You can accept
or reject the call.
X To reject: selectReject and press
0039to
confirm.
or
X Press the 003Cbutton on COMAND or on
the multifunction steering wheel.
X To accept: selectAccept and press
0039to
confirm.
or
X Press the 0017button on COMAND or on
the multifunction steering wheel. 386
TelephoneCOMAND

Symbol overview
Sym
bol Explanation
000F
Address book entry that has been
entered or changed via COMAND
Imported contact that has been
saved in the phone or address book
0035
Address book entry with voice tag
These entries have also been
assigned a voice tag. Voice tags are
available in vehicles with Voice
Control (see the separate operating
instructions).
0026
Contact that has been imported
from a mobile phone that supports
PBAP
0015
Entry that has been imported from
the memory card or USB device
001B
Entry imported via the Bluetooth
®
interface Searching for a phone book entry
Using the character bar
You determine the first letter of the entry you
are looking for with the first character you
enter.
X Select a character by turning 003E0012003Fthe
COMAND Controller and press 0039to
confirm.
The first entry in the list that starts with the
letter selected is highlighted. If there are
similar entries, the next different character
is shown. For example, with entries such as
Christel and
Christine , the beginnings
of the names are similar. In this case, you
will be offered a choice between E and
I .X
Select the characters of the entry you are
searching for one by one and press 0039to
confirm.
When the selection is clear, COMAND
switches automatically to the selection list.
X To complete the search: slide00120038the
COMAND controller repeatedly or press
and hold 0039until the character bar
disappears.
The selection list appears.
Information about character entry
(Y page 299)
Using the number keypad
You determine the first letter of the entry you
are looking for with the first character you
enter.
X Press the appropriate number keys as
many times as necessary and one after the
other.
Further information on character entry using
the number keypad (direct entry)
(Y page 301).
Directly from the list
You can switch to the list at any time during
character entry.
X Slide 00120038the COMAND controller
repeatedly or press and hold 0039until the
character bar disappears.
or
X Select 0004and press 0039to confirm.
X To selecta n entry:turn003E0012003F the
COMAND controller until the desired entry
is highlighted and press 0039to confirm.
To select aphone number: the0002symbol
indicates that an entry contains more than
one phone number.
X Select a phone book entry with the 0002
symbol and press 0039to confirm.
The sub-entries appear. The 0002symbol
changes to 0003. Telephone
389COMAND Z

X
Select the list symbol to the right of the
entry by sliding 00120037the COMAND
controlle rand press 0039to confirm.
X Select Assign Speed Dial Preset and
press 0039to confirm.
The speed dial list appears. The selected
phone book entry is listed as the first entry.
The next available speed dial preset is
highlighted. X
Select the speed dial preset by turning
003E0012003F the COMAND controller and press
0039 to confirm.
The phone book entry is saved in the speed
dial preset.
Making a call via speed dial The speed dial list contains stored phone
book entries (Y page 394).
Option 1:
X Hold down one of the numbe rkeys for
longer than two seconds.
The telephone basic menu displays the
selected entry. This initiates dialing.
Option 2:
X Call up the telephone basic menu
(Y page 383).
X Select Call Lists by sliding
0012000Aand
turning 003E0012003Fthe COMAND controller and
press 0039to confirm.
The speed dial list appears. X
Select Speed Dial Preset List by
turning 003E0012003Fthe COMAND controller and
press 0039to confirm.
The speed dial list appears.
X Select preset and press 0039to confirm.
The telephone basic menu displays the
selected entry. This initiates dialing.
Deleting aspee ddial number X
To delete a speed dial number: select
Delete Speed Dial Preset in the Speed
dial menu by turning 003E0012003Fthe COMAND
controller and press 0039to confirm.
The speed dial numbe ris deleted.
X To delete all speed dial numbers: select
Delete All Speed Dial Presets in the
Speed dial menu by turning 003E0012003Fthe
COMAND controller and press 0039to
confirm.
You will be asked whether you want to
continue.
X Select Yes or
No and press
0039to confirm.
If you select Yes , all speed dial presets will
be deleted from the speed dial list.
If you select No , the process will be
canceled. Text messages
Information and requirements If the above conditions are met, new incoming
text messages appearint
he COMAND text
message inbox. In addition, a tone sounds
and the 0018symbol appears. The symbol is
no longer displayed once you have read the
text message. The úmail symbol is
displayed if the text message memory is full.
The symbol is no longer displayed once you
delete at least one text message.
i COMAND may not load all of the most
recent text messages:
This may occur in exceptional cases, for
example when using certain mobile Telephone
395COMAND Z

X
Bring the Google Local Search panel to
the front and press 0039to confirm.
X To exit the menu: selectBack by sliding
0012000A and turning 003E0012003Fthe COMAND
controlle rand press 0039to confirm.
Search Entry restriction
It is only possible to ente
rasearch term in
the input menu when the vehicle is stationary.
Entering a search term Input menu
X
Confirm Search in the Local search menu
by pressing 0039.
An input menu appears.
X To enter using the character bar: enter
the search term.
X To enter characters using the number
pad: press the number keys in rapid
succession.
The character appears when the key is
pressed. The first available letter is
highlighted. X
After entering the search term, select
0004 by turning 003E0012003Fthe COMAND
controller and press 0039to confirm.
Am enu appears. Here, you can select
where the destination search should begin.
Selecting the search position X
After a search term has been entered and
confirmed, a menu appears.
COMAND Online searches for available
POIs for the search term entered:
R
near the curren tvehicle position
R along the calculated route
R near the destination
If a destination has previously been
entered, the function is available.
R near an address
X After selecting Near Destination , enter
an address and confirm.
The search results are displayed. 408
Online and Internet functionsCOMAND