2012 SSANGYONG NEW REXTON Service Manual

7410-03 Front Seat
- Changed the seatback and seat cushion design.
7115-01 Door Panel
- Changed the front headrest design.
- Changed the color of front/rear door panel wood grain.
7410-12 Front Headrest
- Changed the front headrest design.
- Changed the tilting type from swing type to sliding type.

0000-00
7410-24 Front Seat Back-board
- Changed the seat back-board and seatback pocket
design.
7510-05 Rear Center Armrest
- Changed the rear armrest design.
7410-05 Front Seat Cover Shield
- Changed the front seat cover shield from integrated type to split type.

8410-32 ICM Box
- Deleted the hazard lamp relay and added some
relays (rear side seat warmer, blower, rear
washer/wiper)
8010-01 Instrument Cluster
- Added TPMS related warning lamp and indicator.
3. ELECTRIC SYSTEM
7010-03 Blanking Key
- Changed mechanical key design.

0000-00
8790-03 PAS Sensor
- Changed the locking type from spring type to holder type.
8790-01 PAS Unit
- Changed the PAS sensor operating voltage
center).

4. ENGINE AND CHASSIS
4190-06 Wheel Module
- Added the wheel module in each
wheel according to introduction of
TPMS.
1491-01 Engine Control Unit
- Changed the logic according to
introduction of TPMS.
4190-13 TPMS Unit
- Installed TPMS unit with antenna
according to introduction of TPMS.

0000-00
1990-00 Engine Mounting Insulator
Old
New
- Adopted the optimized engine mounting insulators based on system analysis and on-board
test.
LH RH Rear
LH RH Rear

0000-00
Knock sensor (one) and
water temperature sensor
Fuel rail sensor (common
rail)
1. LOCATION OF MAJOR SENSORS ON ENGINE
Major sensors and devices
InjectorGlow plugCommon rail
Camshaft position sensorBoost pressure sensor
Crankshaft position
sensor
HP pumpCommon rail
Injector
Turbocharger vacuum
modulator