2012 MERCEDES-BENZ SL ROADSTER Owners Manual

Displaying details from a list entry
COMAND Online can also show a shortened
list entry in full.
X Select a list entry by turning cVdthe
COMAND controller.
X Select the list symbol to the right of the
entry by sliding VYthe controller and
press Wto confirm.
X Select Details
Details and press Wto confirm.
The detailed display appears.
X To go back to the list: slideXVY repeat-
edly until the list is highlighted.
Storing a phone number New address book entry
For incoming calls from a person who is not in
the address book, COMAND Online displays
the phone number in the call list. You can save
this entry.
X Open a call list and select an entry
(Y page 405).
X Select the list symbol to the right of the
entry by sliding VYthe COMAND control-
ler and press Wto confirm.
X Select Save
Save and press Wto confirm.
X Select New Newentry
entry and press Wto confirm.
X Select a category for the number, e.g. Home
Home,
and press Wto confirm.
X Select a category for the phone, e.g.
Mobile
Mobile , and press Wto confirm. Number category Display (phone
book and address
book)
Not classified Not classified No symbol
Home
Home ¸
Work
Work · Phone category Display (phone
book and address
book)
Not classified Not classified ;
Landline
Landline ¬
Mobile
Mobile Ï
Car
Car ´
X
Select Save
Saveand press Wto confirm.
An input menu with data fields is shown.
The data field for the telephone number is
filled in automatically. :
Data field with cursor
; Telephone number and symbol for the
phone category are automatically entered
= Character bar
Adding information to an address book
entry
For incoming calls from a person who is not in
the address book, COMAND Online displays
the phone number in the call list. You can save this entry.
X Open a call list and select an entry
(Y page 405).
X Select the list symbol to the right of the
entry by sliding VYthe COMAND control-
ler and press Wto confirm.
X Select Save Saveand press Wto confirm. 406
TelephoneCOMAND Online

i
Save
Save is shown in grey if the selected list
entry has already been saved.
X Select Add telephone no.
Add telephone no. and pressW
to confirm.
X Select a category for the number, e.g. Home
Home,
and press Wto confirm.
X Select a category for the phone, e.g.
Mobile
Mobile, and press Wto confirm.
X Select Save
Save.
The search menu for address book entries
appears.
X Search for the desired entry (Y page 402).
X Press Wwhen you have finished searching.
COMAND Online stores the data if there are
fewer than five numbers assigned to the
entry you are searching for in the selected
number category.
You will see a message to this effect.
If five numbers are stored for the entry you are searching for, a prompt will appear ask- ing whether you wish to overwrite one of
the existing numbers.
X Select Yes
Yes orNo No and press Wto confirm.
If you select Yes
Yes, a selection list with the
five existing numbers is displayed.
If you select No
No, the process will be cancel-
led.
X Select the number to be overwritten in the
list by turning cVdthe COMAND controller
and press Wto confirm.
COMAND Online overwrites the selected
number with the new data.
Deleting call lists If you are using a Bluetooth
®
phone that does
not support the PBAP Bluetooth ®
profile, the
call lists are generated and managed by
COMAND Online. You can delete these call
lists in COMAND Online.
If you download call lists from a Bluetooth ®
phone that supports the PBAP Bluetooth ®
profile, you cannot delete them from
COMAND Online. X
Select Call lists
Call lists in the telephone basic
menu by turning cVdthe COMAND con-
troller and press Wto confirm.
X Select Delete call lists Delete call lists and pressW
to confirm.
A prompt appears asking whether you wish to delete all call lists.
X Select Yes YesorNo
No and press Wto confirm.
If you select Yes
Yes, the call lists are deleted.
If you select No
No, the process will be cancel-
led.
i If you delete these call lists from the
mobile phone; see the separate mobile
phone operating instructions,
COMAND Online updates the call list dis-
play the next time it connects. Using the speed dial list
Storing an entry You can assign ten speed dial presets (0 to 9)
in the speed dial list. There are two options
available for this purpose.
Option 1:
X Search for a phone book entry in the phone
book (Y page 402).
X If an entry has several phone numbers,
select the desired number by turning cVd
the COMAND controller.
X Select the list symbol to the right of the
entry by sliding VYthe COMAND control-
ler and press Wto confirm.
A menu appears.
X Select Speed dial
Speed dial by turningcVdthe
COMAND controller and press Wto con-
firm.
A menu appears. Telephone
407COMAND Online Z

Speed dial menu
X Select Assign speed dial preset
Assign speed dial preset and
press Wto confirm.
The speed dial list appears. The selected
phone book entry appears at the top. The
next free speed dial preset is highlighted. X
Select the speed dial preset by turning
cVd the COMAND controller and press W
to confirm.
The phone book entry is saved in the speed
dial preset.
Option 2 X Call up the telephone basic menu
(Y page 394).
X Select Call
Call lists lists by sliding VÆand turn-
ing cVd the COMAND controller and press
W to confirm.
X Select Speed dial preset list
Speed dial preset list and
press Wto confirm.
The speed dial list appears. X
Select the list symbol to the right of the
entry by sliding VYthe COMAND control-
ler and press Wto confirm.
X Select Assign speed dial preset
Assign speed dial preset and
press Wto confirm.
The speed dial list appears. The selected
phone book entry appears at the top. The
next free speed dial preset is highlighted. X
Select the speed dial preset by turning
cVd the COMAND controller and press W
to confirm.
The phone book entry is saved in the speed
dial preset.
Using speed dial presets to make a call The speed dial list contains stored phone
book entries (Y
page 407).
Option 1:
X Press one of the number keys for longer
than two seconds.
The telephone basic menu displays the
selected entry. This initiates dialling.
Option 2:
X Call up the telephone basic menu
(Y page 394).
X Select Call Calllists
lists by sliding VÆand turn-
ing cVd the COMAND controller and press
W to confirm.
The speed dial list appears. 408
TelephoneCOMAND Online

X
Select Speed
Speed dial
dialpreset
preset list
listby turn-
ing cVd the COMAND controller and press
W to confirm.
The speed dial list appears.
X Select the preset and press Wto confirm.
The telephone basic menu displays the
selected entry. This initiates dialling.
Deleting a speed dial preset X
To delete a speed dial number: select
Delete speed dial preset
Delete speed dial preset in the
"Speed dial" menu by turning cVdthe
COMAND controller and press Wto con-
firm.
The speed dial preset is deleted.
X To delete all speed dial numbers: select
Delete all speed dial presets
Delete all speed dial presets in the
"Speed dial" menu by turning cVdthe
COMAND controller and press Wto con-
firm.
You will be asked if you would like to con-
tinue.
X Select Yes
Yes orNo No and press Wto confirm.
If you select Yes
Yes, all speed dial presets will
be deleted from the speed dial list.
If you select No
No, the process will be cancel-
led. Text messages
Information and requirements In order to be able to use the text message
function, the mobile phone has to support
Bluetooth ®
Profile MAP (Message Access
Profile).
When the mobile phone is connected, the 30
most recent text messages that are currently stored on the phone are loaded to the
COMAND Online text message inbox and dis-
played.
If the above conditions are met, new incoming
text messages appear in the COMAND Online text message inbox. The /symbol
appears in the status bar. The symbol disap- pears once you have read the text message.
The
ú mail symbol is displayed if the text
message memory is full. The symbol is no
longer displayed once you delete at least one
text message.
i Telephony via a data-enabled MB SAP
module (Y page 421).
i COMAND Online may not load all of the
most recent text messages:
This may occur in exceptional cases, for
example when using certain mobile
phones/brackets and if the mobile phone
inbox holds a large number of text mes-
sages.
i You can obtain further information about
suitable mobile phones from your
Mercedes-Benz Service Centre or on the
Internet at http://www.mercedes-
benz.com/connect .
Displaying the text message (SMS)
inbox Calling up the inbox
Text message (SMS) inbox
X Press the %function button.
X Select SMS SMSin the telephone basic menu by
turning cVdthe COMAND controller and
press Wto confirm.
The text message inbox appears. Telephone
409COMAND Online Z

Reading a text message (SMS)
X Call up the text message (SMS) inbox
(Y page 409)
X Select a text message in the text message
inbox by turning cVdthe COMAND con-
troller and press Wto confirm.
The text message appears.
X To scroll through the display or select
phone numbers in a text message: turn
cVd the COMAND controller.
The display scrolls up or down line by line,
or skips to the next or previous telephone
number and automatically highlights it.
X To return to the list: select the&sym-
bol and press Wto confirm or press the
% back button.
Text message read-aloud function
Settings for the read-aloud function:
R Language (Y page 313)
R Speed (Y page 312)
X Press Wwhile a text message is being dis-
played, select Read
Read aloud aloud and press Wto
confirm.
COMAND Online reads out the text mes-
sage.
X To cancel the read-aloud function: press
the 8 button.
or
X Press W, select Cancel read-aloud
Cancel read-aloud
function
function and pressWto confirm.
Sender or text display
You can switch between displaying the text
message sender or the text message content.
The sender display shows the sender of the
text message. If the sender is stored in the
COMAND phone book, the name is displayed.
The text display shows the first few words of a
text message.
X Select a text message in the text message
inbox by turning cVdthe COMAND con-
troller.
X To switch to the text display: select the
list symbol to the right of the text message by sliding
VYthe COMAND controller and
press Wto confirm.
X Select Display Display text textand press Wto con-
firm.
The view changes.
X To switch to the sender display: select
the list symbol to the right of the text mes-
sage by sliding VYthe COMAND controller
and press Wto confirm.
X Select Display sender
Display sender and pressWto
confirm.
The view changes.
X To return to the telephone basic menu:
press the %button.
Displaying details and phone numbers
COMAND Online can also show a shortened
sender display in full.
X Select a text message in the text message
inbox by turning cVdthe COMAND con-
troller.
X Select the list symbol to the right of the text
message by sliding VYthe COMAND con-
troller and press Wto confirm.
X Select Details Details and press Wto confirm.
The detailed display appears.
X To close the detailed display: slideXVY
the COMAND controller.
X To return to the telephone basic menu:
press the %button.
Managing text messages (SMS) Calling a text message (SMS) sender
X Press Wthe COMAND controller while the
text message is being displayed.
X Select Call sender
Call sender and pressWto con-
firm.
The telephone makes the call to the sender. 410
TelephoneCOMAND Online

Using phone numbers in the text
:
Usable numerical sequence
Numbers in text messages that are highligh-
ted in red can be used.
X Select a usable number when the text mes-
sage is displayed.
X Press Wthe COMAND controller and
select Use
Use.
X Select Call
Call.
The telephone makes the call.
i It is possible that a highlighted numerical
sequence may not contain a telephone
number.
i You can use the "New entry" or "Add no."
functions to save this telephone number or to add it to an existing entry.
Storing the sender of a text message in
the address book
This function is not available if the sender’s
telephone number is already stored in the
address book.
X Press Wthe COMAND controller while the
text message is being displayed.
X Select Save number
Save number and pressWto con-
firm.
X Select New
New entry entry and press Wto confirm.
X Store the phone number (Y page 406)Adding the sender of a text message to an
address book entry
X Press Wthe COMAND controller while the
text message is being displayed.
X Select Save number
Save number and pressWto con-
firm.
X Select Add telephone no.
Add telephone no. and pressW
to confirm.
X Proceed from the step "Selecting a number
category" (Y page 404).
Deleting a text message (SMS)
X Select a text message in the text message
inbox by turning cVdthe COMAND con-
troller.
X Select the list symbol to the right of the text
message by sliding VYthe COMAND con-
troller and press Wto confirm.
X Select Delete Delete and press Wto confirm.
A deletion prompt appears.
X Select Yes YesorNo
No and press Wto confirm.
If you select Yes
Yes, the text message is
deleted.
If you select No No, the process will be cancel-
led.
i This delete function is not supported by all
mobile phones. The Delete failed
Delete failedmes-
sage appears. Using the address book
Introduction The address book organises and stores
entries that are entered from different sour-
ces (mobile phone, memory card, USB device,
COMAND telephone book, navigation sys-
tem).
You can use these entries to make telephone
calls and to navigate.
i Number of contacts in the address
book: the address book can store a total of
4,000 contacts. Telephone
411COMAND Online Z

1,500 entries each are reserved in the
address book for:
R contacts from the mobile phone
R contacts that you create in
COMAND Online or import from other
sources
The remaining 1,000 entries are assigned
by COMAND Online as necessary.
i Display of mobile phone contacts:
con-
tacts downloaded from the mobile phone
remain in the address book even if you dis- connect the mobile phone from
COMAND Online. Contacts that have pre-
viously been available can be displayed as
soon as the mobile phone is reconnected.
COMAND Online downloads the contacts
again so that any new contacts that have
been added to the mobile phone can be
displayed.
As soon as you connect a new mobile
phone to COMAND Online all the contacts
from the previous mobile phone are
replaced by those from the new phone's
address book.
Address book entries remain stored if the
mobile phone is disconnected. For this rea-
son, delete your personal data using the
reset function before selling your vehicle,
for example (Y page 316).
Calling up the address book Using the function button:
X Press the %function button.
You see either the telephone basic menu or
the address book, depending on which was
last active.
X If the telephone basic menu is displayed,
press the %function button again.
Using the telephone basic menu:
X When the telephone basic menu is dis-
played, select Tel
Tel by sliding VZthe COMAND controller and press
Wto con-
firm.
X Select Address book
Address book from the menu and
press Wto confirm. Address book with
¥address book entry and L
navigable data
X To browse in the address book: turn
cVd the COMAND controller.
X To close the address book: press the
% button.
i An address book entry can contain the
following information:
R name
R first name
R company
R two addresses
R geo-coordinates
R up to five telephone numbers 412
TelephoneCOMAND Online

Searching for an address book entry
Search menu with character bar
:
¥Address book entry
; L Complete address data from the nav-
igation system
= Character bar
? d Phone book entry on the mobile phone
A Entry with voice tag
For more symbols, see the symbol overview
(Y page 402)
X Find entry (Y page 402)
Creating a new entry in the address
book You can enter address data directly into the
address book. If you store telephone num-
bers in the COMAND phone book, these are
also saved in the address book. If you store a
navigation destination, COMAND Online cre-
ates an address book entry which includes
the complete navigable address data.
X Call up the address book (Y page 412)
X Select New
New in the address book by sliding
VÆ and turning cVdthe COMAND con-
troller and press Wto confirm.
An input menu with data fields appears. Input menu with data fields
:
Selected data field with cursor
; Character bar
X Enter characters (Y page 303)
X Save the entry (Y page 304)
Deleting an address book entry X
Option 1: selectDelete Delete by sliding VÆand
turning cVdthe COMAND controller and
press Wto confirm.
X Option 2: search for an address book entry
(Y page 402).
X Select the list symbol to the right of the
entry by sliding VYthe COMAND control-
ler and press Wto confirm.
X Select Delete Delete and press Wto confirm.
Irrespective of the option chosen, a prompt
will appear.
X Select Yes
YesorNo
No and press Wto confirm.
If you select Yes
Yes, the entry will be deleted.
If you select No
No, the process will be cancel-
led. Telephone
413COMAND Online Z