Page 177 of 318

AUDIO SYSTEM167
CD/AUX
CD (Compact Disc)
Push “CD/AUX” to switch from radio op-
eration to compact disc operation. If the
audiosystem is off, you can turn on the
compact disc player by pushing “CD/AUX”.
In both cases, a disc must already be
loaded in the player.
The player will automatically start when
you insert a compact disc. At this time,
“CD” appears on the display.
When the audio is set into compact disc
operation, the display shows the track or,
track and disc number currently being
played. Each time you push “CD/AUX”,
the system changes between single disc
player and compact disc changer.
If the player malfunctions, your audio sys-
tem will display following error messages.
If “WAIT” appears on the display,it indi-
cates that the inside of the player unit
may be too hot due to the very high ambi-
ent temperature. Remove the disc or mag-
azine from the player and allow the player
to cool down.
If “Err 1” appears on the display,it
indicates the disc is dirty, damaged, or it
was inserted up−side down. Clean the
disc or insert it correctly.
If “Err 2” appears on the display,it
indicates no disc is loaded inside the
magazine, insert a disc.
If “Err 3” appears on the display,it
indicates there is a trouble inside the sys-
tem. Eject the disc or magazine. Set the
disc or magazine again.
If “Err 4” appears on the display,over−
current. Ask any authorized Toyota dealer
or repairer, or another duly qualified and
equipped professional, to inspect.
If “OPEn” appears on the display,it
indicates the compact disc changer lid is
open. Close the compact disc changer lid.If the malfunction is not rectified,take
your vehicle to any authorized Toyota
dealer or repairer, or another duly quali-
fied and equipped professional.
AUX
In order to listen to a portable music play-
er, such as a compact disc or MD player,
through the car stereo speakers, push the
“CD/AUX” button after it has been con-
nected to the AUX port on the audio front
panel.
DISC
Compact disc changer only—
By using this button, you can select a
discyouwishtolistento.
Push either side of the button until the
number of the disc you want to listen to
appears on the display.
PTY (Program Type)
Push “PTY”. If the button is pushed while
receiving a PTY code of the RDS station,
the current program type (“NEWS”,
“SPORTS”, “TALK”, “POP”, “CLASSICS”)
will appear on the display. If another pro-
gram type is desired, push “PTY” until
your desired program type appears.
If no PTY code of RDS station is re-
ceived, “NO PTY” will appear on the dis-
play.
If either “”or“” side of the “TUNE/
TRACK” button is pushed while the pro-
gram type is appeared on the display, the
radio will search a station that carries
PTY code. If the radio cannot seek out
any stations, “NOTHING” will appear on
the display.
AYGO WE 99E37E11 02.18
Page 178 of 318

168AUDIO SYSTEM
If the system is left untouched for 6 sec-
onds while the program type is displayed,
or if another operation is made, the pro-
gram type display will disappear and the
radio will broadcast a program of the last
program type displayed.
RAND (Random)
There are two random features—you can
either listen to the tracks on all the com-
pact discs in the magazine in random or-
der, or only listen to the tracks on a
specific compact disc in random order.
To randomly play the tracks on a disc:
Quickly push and release “RAND”. “RAND”
will appear on the display. The disc you
are listening to will play in random order.
If you hear a beep, you held the button
too long, and the player will play all the
tracks in the magazine in random order.
To turn off the random feature, push the
“RAND” a second time.
Compact disc changer only—
To randomly play all the tracks in the
magazine:
Push and hold “RAND” until you hear a
beep. “D−RAND” will appear on the dis-
play and the player will perform all the
tracks on all the discs in the magazine in
random order. To turn off the random fea-
ture, push “RAND” a second time.RPT (Repeat)
There are two repeat features—you can
either replay a disc track or a whole com-
pact disc.
Repeating a track:
Quickly push and release “RPT” while the
track is playing. “RPT” will appear on the
display. If you hear a beep, you held the
button too long, and the player will repeat
the whole disc. When the track ends, it
will automatically be replayed. This pro-
cess will be continued until you push the
button again to turn off the repeat feature.
Compact disc changer only—
Repeating a disc:
Push and hold “RPT” until you hear a
beep. “D−RPT” will appear on the display.
The player will repeat all the tracks on the
disc you are listening to. When the disc
ends, the player will automatically go back
to the first track on the disc and replay.
This process will be continued until you
push the button again to turn off the re-
peat feature.
AYGO WE 99E37E11 02.18
Page 179 of 318

AUDIO SYSTEM169
SCAN
There are two scan features—you can ei-
ther scan the tracks on a specific disc or
scan the first tracks of all the discs in the
magazine.
Scanning the tracks on a disc:
Quickly push and release “SCAN”. “SCAN”
will appear on the display and the player
will scan all the tracks on the disc you
are listening to. If you hear a beep, you
held the button too long, and the player
will scan the first tracks of all the discs
in the magazine. To select a track, push
the “SCAN” a second time. If the player
scanned all the tracks on the disc, it will
stop scanning.
Compact disc changer only—
Scanning for the first tracks of all the
discs in the magazine:
Push and hold “SCAN” until you hear a
beep. “D−SCAN” will appear on the dis-
play and the player will perform the first
track of the next disc. To select a disc,
push the “SCAN” a second time. If the
player has scanned all the discs, it will
stop scanning.
ST (Stereo reception) display
Your radio automatically changes to stereo
reception when a stereo broadcast is re-
ceived. “ST” appears on the display. If the
signal becomes weak, the radio reduces
the amount of channel separation to prev-
ent the weak signal from creating noise.
If the signal becomes extremely weak, the
radio switches from stereo to mono recep-
tion.TA (Traffic Announcement)
This button is used for receiving TA sta-
tions all over the band.
EON (Enhanced Other Network) sys-
tem—If the RDS station (with EON data)
you are listening to is not broadcasting a
traffic information program at the TA (Traf-
fic Announcement) mode, the radio will be
switched to the traffic information program
automatically by using the EON AF list.
After the traffic information ends, the radio
will return to the initial program automati-
cally. A beep will sound to tell you when
this feature starts and ends the operation.
When receiving FM:
Push “TA” to switch the radio mode to TP
(Traffic Program). “TP” will appear on the
display.
In the TP mode, the radio will begin seek-
ing a TP station. If the radio seek out a
TP station, the program name will appear
on the display. If the TA station is re-
ceived, the radio will be switched to the
traffic information program automatically.
When the program ends, the initial opera-
tion resumes. When also in AF mode, the
radio will seek a TP station by using the
AF list.
Push “TA” once again to switch the radio
mode to TA. “TA” will appear on the dis-
play and the radio will mute the volume
of FM station.
In the TA mode, the radio will begin seek-
ing a TP station. It sounds only when a
TP station is received. When a TP station
is received, the program service name will
appear on the display. In the AF mode,
the radio will also begin seeking a TP
station by using the AF list.
While the radio is seeking a TP station,
“TP SEEK” appears on the display. If the
radio cannot seek out any TP stations,
“NOTHING” will appear on the display for
2 seconds and the radio will begin seek-
ing a TP station again.
AYGO WE 99E37E11 02.18
Page 180 of 318

170AUDIO SYSTEM
If the TP signal is halted for 20 seconds
after the TP mode was set, the radio will
seek another TP station automatically.
When listening to a tape or compact disc:
Push “TA” to switch the radio mode to TA.
“TA” will appear on the display.
When the traffic information program
starts, the “CD” mode is interrupted and
the traffic information is automatically
broadcasted. When the program ends, the
initial operation resumes.
“TA” volume memory function—The volume
at receiving the traffic announcement is
memorized.
The range of volume memory is limited:
if the volume received previously is grater
than the maximum range of the volume,
this will become the maximum range and
if it is less than the minimum, this volume
will be the minimum range.
You can adjust the volume independently
from the memorized “TA” volume range
while receiving a “TA” station.
To return to the normal mode from the TA
mode, push “TA” once again.
NOTICE
To ensure correct audio system op-
erations:
zBe careful not to spill beverages
over the audio system.
zDo not put anything other than a
cassette tape or CD into the cas-
sette tape slot or CD slot.
zThe use of a cellular phone inside
or near the vehicle may cause a
noise from the speakers of the au-
dio system which you are listening
to. However, this does not indicate
a malfunction.
RADIO RECEPTION
FM broadcasts have a range of about 40
km or 25 miles. When driving away from
a station, you may have to fine−tune the
radio and turn up the volume as the sta-
tion gets weaker. Because FM uses a
line−of−sight signal, tall buildings or hills
may sometimes block reception. These
are all normal characteristics of FM recep-
tion and do not indicate any problem with
the radio itself.
AYGO WE 99E37E11 02.18
Audio system operating hints
Page 181 of 318
AUDIO SYSTEM171
CARING FOR YOUR COMPACT DISC
PLAYER AND DISCS
DYour player is intended for use with 12
cm (4.7 in.) discs only.
DExtremely high temperatures can keep
your compact disc player from working.
On hot days, use the air conditioning
to cool the vehicle interior before you
listentoadisc.
DBumpy roads or other vibrations may
make your compact disc player skip.
DIf moisture gets into your compact disc
player, you may not hear any sound
even though your compact disc player
appears to be working. Remove the
disc from the player and wait until it
dries.
CAUTION
Compact disc players use invisible
laser beams which could cause
hazardous radiation exposure if
directed outside the unit. Be sure to
operate the player correctly.
DUse only compact discs marked as
shown above. The following products
may not be playable on your compact
disc player.
Copy−protected CD
CD−R(CD−Recordable)
CD−RW (CD−Re−writable)
CD−ROM
AYGO WE 99E37E11 02.18
Page 182 of 318
172AUDIO SYSTEM
Z17038
Special shaped discs
Z17058
Transparent/translucent discs
Z17039
Low quality discs
Z17037
Labeled discs
NOTICE
zDo not use special shaped, trans-
parent/translucent, low quality or la-
beled discs such as those shown in
the illustrations. The use of such
discs may damage the player or
changer, or it may be impossible to
eject the disc.
zThis system is not designed for use
of Dual Disc. Do not use Dual Disc
because it may cause damage to
the player.
AYGO WE 99E37E11 02.18
Page 183 of 318
AUDIO SYSTEM173
Z17052
Correct Wrong
DHandle compact discs carefully, espe-
cially when you are inserting them.
Hold them on the edge and do not
bend them. Avoid getting fingerprints
on them, particularly on the shiny side.
DDirt, scratches, warping, pin holes, or
other disc damage could cause the
player to skip or to repeat a section of
a track. (To see a pin hole, hold the
disc up to the light.)
DRemove discs from the compact disc
player when you are not listening to
them. Store them in their plastic cases
away from moisture, heat, and direct
sunlight.
Z17053
To clean a compact disc: Wipe it with a
soft, lint−free cloth that has been damp-
ened with water. Wipe in a straight line
from the center to the edge of the disc
(not in a circles). Dry it with another soft,
lint−free cloth. Do not use a conventional
record cleaner or anti−static device.
AYGO WE 99E37E11 02.18
Page 184 of 318
174AUDIO SYSTEM
AYGO WE 99E37E11 02.18