2011 TOYOTA AYGO lights

ix
Table of contents
1 OPERATION OF INSTRUMENTS AND CONTROLSPage
1 Overview of instruments and controls1 .......................
2 Keys and Doors9 .......................................
3 Occupant restraint systems41 .............................
4 Steering wheel and Mirrors111 .............................
5 Lights, Wipers and Defogger11 5 ............................
6 Gauges, Meters and Service reminder indicators123 ............
7 Engine (ignition) switch, Transmission and Parking brake137 .....
8 Audio system161 ........................................
9 Air conditioning system175 ................................
10 Other equipment187 .....................................
2 INFORMATION BEFORE DRIVING YOUR TOYOTA 193........
3 STARTING AND DRIVING 209...............................
4 IN CASE OF AN EMERGENCY 219..........................
5 CORROSION PREVENTION AND APPEARANCE CARE 245...
6 MAINTENANCE REQUIREMENTS 253.......................
7DO−IT−YOURSELF MAINTENANCE
1 Introduction257 .........................................
2 Engine and Chassis263 ..................................
3 Electrical components277 .................................
8 SPECIFICATIONS 291......................................
9 INDEX 303................................................
AYGO WE 99E37E11 02.22

6OVERVIEW OF INSTRUMENTS AND CONTROLS
MS11009
1. Speedometer
2. Fuel gauge
3. Gear position indicators
(multi−mode manual transmission)4. Odometer and trip meter
5. Service reminder indicators and
indicator lights
6. Trip meter reset knob
AYGO WE 99E37E11 02.18
Instrument cluster overview

8OVERVIEW OF INSTRUMENTS AND CONTROLS
Engine preheating indicator light
Electric power steering system warning light∗
Turn signal indicator lights
Headlight high beam indicator light
Headlight low beam indicator light
Rear fog light indicator light
Slip indicator light
∗: For details, see “Service reminder indicators and warning
buzzers” on page 127 in Section 1−6.
AYGO WE 99E37E11 02.18

KEYS AND DOORS19
If the wireless remote control key does
not actuate the doors, or does not operate
from a normal distance:
DCheck for closeness to a radio trans-
mitter such as a radio station or an
airport which can interfere with normal
operation of the key.
DThe battery may have been consumed.
Check the battery in the key. To
replace the battery, see “—Replacing
battery” on page 20.
If you lose your wireless remote control
key, contact any authorized Toyota dealer
or repairer, or another duly qualified and
equipped professional, as soon as pos-
sible to avoid the possibility of theft, or an
accident. (See “If you lose your keys” on
page 243 in Section 4.)
MS12002a
Locking operation
MS12003a
Unlocking operation
To lock and unlock all the side doors
and back door, push the switches of
the key slowly and securely.
To lock: Push the “
”(LOCK)switch.All
the side doors and back door will be
locked simultaneously. At this time, the
turn signal lights flash once.
Check to see that the doors are securely
locked.
To unlock: Push the “
” (UNLOCK)
switch. All the side doors and back door
are unlocked simultaneously. At this time,
the turn signal lights flash twice.
AYGO WE 99E37E11 02.18
—Locking and unlocking
doors

11 4STEERING WHEEL AND MIRRORS
MS13083
Adjust the mirror so that you can just
see the rear of your vehicle in the mir-
ror.
To reduce glare from the headlights of
the vehicle behind you during night
driving, operate the lever on the lower
edge of the mirror.
Daylight driving—Lever at position 1
The reflection in the mirror has greater
clarity at this position.
Night driving—Lever at position 2
Remember that by reducing glare you also
lose some rear view clarity.
CAUTION
Do not adjust the mirror while the
vehicle is moving. Doing so may
cause the driver to mishandle the ve-
hicle and an accident may occur re-
sulting in death or serious injuries.
MS13023
To use the vanity mirrors, swing down
the sun visor and open the cover.
AYGO WE 99E37E11 02.18
Anti−glare inside rear view
mirrorVanity mirrors

LIGHTS, WIPERS AND DEFOGGER11 5
Section 1−5
OPERATION OF INSTRUMENTS AND
CONTROLS
Lights, Wipers and Defogger
DHeadlights and turn signals 116.............................
DHeadlight beam level control 117............................
DEmergency flashers 118....................................
DRear fog light 119..........................................
DInterior light 119...........................................
DWindshield wiper and washer 120...........................
DRear window wiper and washer 120.........................
DRear window defogger 121.................................
AYGO WE 99E37E11 02.18

11 6LIGHTS, WIPERS AND DEFOGGER
Headlights and turn signals
MS14001b
HEADLIGHTS
To turn on the following lights: Twist
the headlight/turn signal lever knob.
Position 1—Position, tail, license plate and
instrument panel lights
Position 2—Headlights and all of the
above
However, on some models, all the lights
above also turn on when the engine is
started with the headlight switch off.
The headlight low beam indicator light
(green light) on the instrument cluster will
tell you that the low beams are on.
Adjust the headlight beam level before
turning on the headlights. (See “Headlight
beam level control” on page 117.)
Light reminder buzzer
A buzzer will remind you to turn the lights
off when the driver ’s door is opened if the
engine switch is turned to the “LOCK”
position with the headlights switch on.
NOTICE
To prevent the battery from being dis-
charged, do not leave the lights on
for a long period when the engine is
not running.
MS14002b
High−Low beams—For high beams, turn
the headlights on and push the lever away
from you (position 1). Pull the lever to-
ward you (position 2) for low beams.
The headlight low beam indicator light
(green light) on the instrument cluster will
tell you that the low beams are on.
The headlight high beam indicator light
(blue light) on the instrument cluster will
tell you that the high beams are on.
Flashing the high beam headlights
(position 3)—Pull the lever all the way
back. The high beam headlights turn off
when you release the lever.
You can flash the high beam headlights
with the knob turned to “OFF”.
AYGO WE 99E37E11 02.18

LIGHTS, WIPERS AND DEFOGGER11 7
MS14003b
TURN SIGNALS
To signal a turn, push the headlight/
turn signal lever up or down to position
1.
The engine switch must be in the “ON”
position.
The lever automatically returns after you
make a turn, but you may have to return
it by hand after you change lanes.
To signal a lane change, move the lever
up or down to the pressure point (position
2) and hold it.
If the turn signal indicator lights (green
lights) on the instrument cluster flash fast-
er than normal, a front or rear turn signal
bulb has burned out.
Headlight beam level control
MS14004a
To adjust the headlight beam level, turn
the switch.
The following list shows examples of prop-
er switch settings. For loading conditions
other than those listed, adjust the dial
position so that the beam level is the
same as the one obtained according to
the list when only the driver is in the
vehicle. The higher the number of the dial
position, the lower the headlight beam lev-
el.
CAUTION
Always keep the headlight beam at
the proper level, or your headlights
may dazzle other road users, causing
unexpected accidents.
AYGO WE 99E37E11 02.18