2011 TOYOTA AYGO Owners Manual

DO−IT YOURSELF MAINTENANCE: Electrical components287
MS73037b
Removing clip
MS73038a
Installing clip
MS73041
MS73036b
Remove the connector.
MS73040
AYGO WE 99E37E1102.18

288DO−IT YOURSELF MAINTENANCE: Electrical components
MS73017a
MS73019a
a:Stop/tail light
b: Rear turn signal light
c: Rear fog (driver side) or back−up
light (passenger side)
—High mounted stoplight
MS73021
Use a Phillips−head screwdriver.
MS73022a
Clips
Remove the clips by using a flathead
screwdriver with the tip wrapped in tape.
MS73023
AYGO WE 99E37E1102.18

DO−IT YOURSELF MAINTENANCE: Electrical components289
MS73042
—License plate lights
LEFT SIDE LICENCE PLATE LIGHT—
When the left bulb is needed to replace,
detach the right side license plate light
first. Then, remove the left side license
plate light to replace the bulb.
INFORMATION
Be careful not to drop the connector
into the installation opening when dis-
connecting it. If the connector drops
into the opening, please contact any
authorized Toyota dealer or repairer,
or another duly qualified and
equipped professional, because disas-
sembly is required to pick it up.
AYGO WE 99E37E1102.18

290DO−IT YOURSELF MAINTENANCE: Electrical components
MS73025
Use a flathead screwdriver with the tip
wrapped in tape.
MS73026
MS73027
AYGO WE 99E37E1102.18

SPECIFICATIONS291
Section 8
SPECIFICATIONS
DDimensions 292...........................................
DWeights 293...............................................
DEngine 294................................................
DFuel 294..................................................
DService specifications 294..................................
DTires 299.................................................
DFuses 300................................................
AYGO WE 99E37E11 02.18

292SPECIFICATIONS
Dimensions
mm (in.):
Overall length
3415 (134.4)
Overall width1615 (63.6)
Overall height1465 (57.7)
Wheelbase2340 (92.1)
Front tread1420 (55.9)
Rear tread1410 (55.5)
AYGO WE 99E37E11 02.18

SPECIFICATIONS293
Weights
kg (lb.):
Model
∗Gross vehicle mass
(GVM)
Maximum permissible axle
capacity (MPAC)
Model(GVM)FrontRear
KGB10L−AGMRKW1180 (2601)695 (1532)695 (1532)
KGB10R−AGMRKW1180 (2601)695 (1532)695 (1532)
KGB10L−AGMGKW1180 (2601)695 (1532)695 (1532)
KGB10R−AGMGKW1180 (2601)695 (1532)695 (1532)
KGB10L−AHMRKW1190 (2623)695 (1532)695 (1532)
KGB10R−AHMRKW1190 (2623)695 (1532)695 (1532)
KGB10L−AHMGKW1190 (2623)695 (1532)695 (1532)
KGB10R−AHMGKW1190 (2623)695 (1532)695 (1532)
KGB10L−AGGGKW1180 (2601)695 (1532)695 (1532)
KGB10L−AHGGKW1190 (2623)695 (1532)695 (1532)
KGB10R−AGGGKW1180 (2601)695 (1532)695 (1532)
KGB10R−AHGGKW1190 (2623)695 (1532)695 (1532)
∗: The model code appears on the manufacturer ’s plate with the heading “MODEL”.
See “Your Toyota’s identification” on page 206 in Section 2 for the manufacturer ’s
label location.
AYGO WE 99E37E11 02.18

294SPECIFICATIONS
Engine
Model:
1KR−FE
Type:
3 cylinder in line, 4cycle, gasoline
Bore and stroke, mm (in.):
71.0×84.0 (2.79×3.30)
Displacement, cm
3(cu. in.):
998 (60.9)
Fuel
Fuel type:
EU area:
Unleaded gasoline conforming to Euro-
pean standard EN228, Research Oc-
tane Number of 95 or higher
Except EU area:
Unleaded gasoline, Research Octane
Number of 95 or higher
Fuel tank capacity, L (gal., lmp. gal.):
35 (9.2, 7.7)
Service specifications
ENGINE
Valve clearance (engine cold), mm (in.):
Intake 0.145—0.235 (0.006—0.009)
Exhaust 0.275—0.365 (0.011—0.014)
Spark plug type:
DENSO K16HR−U11
Spark plug gap, mm (in.):
1.1 (0.043)
Drive belt deflection with 98 N (10 kgf, 22
lbf) thumb force (used belt), mm (in.):
9.0—11.0 (0.35—0.43)
AYGO WE 99E37E11 02.18