166AUDIO SYSTEM
AF (Alternative Frequency)
This button is used for seeking RDS (Ra-
dio Data System) stations all over the
band.
Each time you push “AF”, the AF mode
will change in the following order:
AF on: “AF” appears on the display. In
this mode, the radio switches over to the
broadcasting station providing good recep-
tion within the same PI (Program Identifi-
cation) code.
REG on: “AF REG” appears on the dis-
play. In this mode, the radio switches over
to a broadcasting station providing good
reception within the same local PI (Pro-
gram Identification) code.
To turn the AF function off, push the
switch once again.
AM/FM
Push “AM/FM” to switch between the AM
and FM band. “AM”, “FM1”, “FM2” or
“FM3” will appear on the display.
If the audiosystem is off, you can turn
on the radio by pushing “AM/FM”.
AST (Autostore)
Push “AST” until a beep is heard to auto-
matically preset frequencies of up to 6
radio stations for each band (FM3 and
AM).
If you use the “AST” in the FM mode
(FM1, FM2, FM3), it will be automatically
stored in FM3. For example, even if you
Autostore in FM1, the mode will change
to FM3.
Push “AST” until a beep is heard. If the
radio cannot seek out any stations, it will
receive the frequency before you operate
“AST”.AUDIO CONT (Audio control)
Manual tone adjustment function—
This button is used to adjust the tone
manually.
For low−pitch tone adjustment, push
“AUDIO CONT” repeatedly until “BAS”
appears on the display. Then push the
“”or“” side of the “TUNE/TRACK”
button to suit your preference.
The display will show the range from
“BAS−5” to “BAS +5”.
For high−pitch tone adjustment, push
“AUDIO CONT” repeatedly until “TRE”
appears on the display. Then push the
“”or“” side of the “TUNE/TRACK”
button to suit your preference.
The display will show the range from
“TRE−5” to “TRE +5”.
Sound balance adjustment function—
This button is also to adjust the sound
balance between the front and rear, and
the right and left speakers.
For front/rear adjustment, push “AUDIO
CONT” repeatedly until “FAD” appears on
the display. Then push the “”or“”
side of the “TUNE/TRACK” button to ad-
just the front/rear balance.
The display will show the range from “FAD
F7” to “FAD R7”.
For left/right adjustment, push “AUDIO
CONT” repeatedly until “BAL” appears on
the display. Then push the “”or“”
side of the “TUNE/TRACK” button to ad-
just the left/right balance.
The display will show the range from “BAL
L7” to “BAL R7”.
AYGO WE 99E37E11 02.18
