2011 MERCEDES-BENZ GL350 BlueTEC Owner's Manual

Page 273 of 376

MERCEDES-BENZ GL350 BlueTEC 2011 X164 Owners Manual XInsert guide rod ; into retainer  : in the
direction of the arrow.XSlide guide rod  ; forwards into
retainer  : in the direction of the arrow.
Tightening the cargo net
Seat belt reel holder behind th

Page 274 of 376

MERCEDES-BENZ GL350 BlueTEC 2011 X164 Owners Manual You can slide mounting element ; in loading
rail  : to various detents and secure it. These
detents are marked and positioned at 5-cm
intervals along loading rail  :.
You can turn mounting element  ;

Page 275 of 376

MERCEDES-BENZ GL350 BlueTEC 2011 X164 Owners Manual XInsert one mounting element ; into each
loading rail.XTurn mounting elements  ; in the loading
rail to  =.XInsert telescopic rod  : into mounting
elements  ;.XTurn mounting element  ; to  &  until
yo

Page 276 of 376

MERCEDES-BENZ GL350 BlueTEC 2011 X164 Owners Manual Installing the crossbarsGWarning!
Please follow these installation instructions
carefully. Caution should be exercised to
avoid damage to the vehicle while installing
the crossbars. Also, be careful n

Page 277 of 376

MERCEDES-BENZ GL350 BlueTEC 2011 X164 Owners Manual accessories and/or the objects attached to
them could come loose from the vehicle,
thereby injuring you and other persons and/
or causing damage to property, including
damage to your vehicle.
!  Have

Page 278 of 376

MERCEDES-BENZ GL350 BlueTEC 2011 X164 Owners Manual XEnsure that clamping claw A sits flush
against the inner edge of roof rail  F.
If necessary, adjust the span width of the
crossbar ( Y page 276).XSlightly tighten up bolts  ? on both sides
in a clock

Page 279 of 376

MERCEDES-BENZ GL350 BlueTEC 2011 X164 Owners Manual Removing the crossbars:Key;Protective cap=Sticker FRONT (or REAR)?Bolt for the clamping clawAClamping clawXUnlock protective cap ; using key  :.XRemove protective cap  ;.XTurn the bolts of clamping cl

Page 280 of 376

MERCEDES-BENZ GL350 BlueTEC 2011 X164 Owners Manual You can remove the cup holder to clean it.
Clean the cup holder with clear, lukewarm
water only.XTo remove:  hold cup holder  : by
support  ; and pull out in the direction of
the arrow.XTo install:  p