Page 2250 of 3039
Interior Trim and Ornamentation - Front Scuff Plate Trim Panel
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details. Published: 19-Dec-2012
Installation
1. CAUTIONS:
Care must be taken when releasing the trim panel
from the retaining clips.
Make sure that the component is correctly located on
the locating dowels.
1. To install, reverse the removal procedure.
Page 2251 of 3039
Published: 11-May-2011
Interior Trim and Ornamentation - Instrument Panel Speaker Grille
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).
2. CAUTIONS:
Protect the surrounding trim to avoid damage.
Make sure that the clips are correctly located.
3.
4. CAUTION: Make sure that the component is correctly
located on the locating dowels.
NOTE: Do not disassemble further if the component is
removed for access only.
Torque: 2 Nm
Page 2253 of 3039

Interior Trim and Ornamentation - Headliner
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details. Published: 11-May-2011
1. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).
2. Refer to: Interior Rear View Mirror (501-09 Rear View Mirrors, Removal and Installation).
3. Refer to: Overhead Console (501-12 Instrument Panel and Console, Removal and Installation).
4.
Remove both sun visors.
Refer to: Sun Visor (501-05 Interior Trim and Ornamentation, Removal and Installation).
5.
Remove both A-pillar trim panels.
Refer to: A-Pillar Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
6.
Remove both B-pillar upper trim panels.
Refer to: B-Pillar Upper Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
7.
Remove both C-pillar trim panels.
Refer to: C-Pillar Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
8.
Remove both front seats.
Refer to: Front Seat (501-10 Seating, Removal and Installation).
9. Refer to: Rear Seat Cushion (501-10 Seating, Removal and Installation).
Page 2259 of 3039
Published: 11-May-2011
Interior Trim and Ornamentation - Loadspace Scuff Plate Trim Panel
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
1.
2.
Installation
1. To install, reverse the removal procedure. www.JagDocs.com
Page 2260 of 3039
Interior Trim and Ornamentation - Loadspace Trim Panel
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details. Published: 11-May-2011
1.
2.
3.
Installation
Repeat the above procedure for the other side.
1. To install, reverse the removal procedure.
Page 2261 of 3039
Interior Trim and Ornamentation - Loadspace Trim Panel LH
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details. Published: 11-May-2011
1. Refer to: Loadspace Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
2. Refer to: Loadspace Scuff Plate Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
3.
4.
Installation
1. To install, reverse the removal procedure.
Page 2262 of 3039
Interior Trim and Ornamentation - Loadspace Trim Panel RH
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details. Published: 11-May-2011
1. Refer to: Loadspace Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
2. Refer to: Loadspace Scuff Plate Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
Installation
3.
4. NOTE: LH illustration shown, RH is similar.
1. To install, reverse the removal procedure.
Page 2263 of 3039
Published: 11-May-2011
Interior Trim and Ornamentation - Luggage Compartment Lid Trim Panel
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
1.
2.
3.
1. To install, reverse the removal procedure. Installation