2008 HONDA ODYSSEY Owners Manual

Page 121 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual There are two custom settings in the
Lighting Setup:Press the SEL/RESET button. The
display changes as shown above.
Each time you press the INFO
button, the highlighted number
changes f rom ‘‘15 s

Page 122 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual If you f ail to enter your selection,
you will see the above display f or
several seconds, and the display goes
back to ‘‘CUSTOMIZE MENU.’’
Repeat the setup.To exit ‘‘INTERIOR LIGHT
DIMMIN

Page 123 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual The headlights, parking lights,
taillights, and license plate light turn
of f af ter the selected time when you
remove the key from the ignition
switch and close the driver’s door.While the multi-in

Page 124 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual When your selection is entered, you
will see the above display for several
seconds, and then the display goes
back to ‘‘CUSTOMIZE MENU.’’If you f ail to enter your selection,
you will see the

Page 125 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual To customize a setting, press the
INFO button repeatedly until you see
the setting you want to customize,
and press the SEL/RESET button.
Then f ollow the procedures
described on the f ollowing pages.

Page 126 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual µµµ
There are three settings you can
choose f rom:
OFF
The auto door lock is deactivated all
the time.
Press the SEL/RESET button. The
display changes as shown above.
Press the INFO button repea

Page 127 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual If you f ail to enter your selection,
you will see the above display f or
several seconds, and the display goes
back to ‘‘CUSTOMIZE MENU.’’
Repeat the setup.To exit ‘‘AUTO DOOR LOCK,’’

Page 128 of 524

HONDA ODYSSEY 2008 RB1-RB2 / 3.G Owners Manual µ
µ
µ While the multi-information display
shows ‘‘DOOR·WINDOW SETUP,’’
press the SEL/RESET button on the
steering wheel. Then press the
INFO button once. The display
changes to ‘‘AU