2008 AUDI S8 Owners Manual

If your vehicle is driven by other persons using your remote control
key, you should save your individual seat posi tion on one of the
memory buttons. You can recall your settings again simply and
conveniently by pressing the corresponding memory bu tt o n. When
the vehicle is locked, these settings are automatically re -assigned to
the remote control key and stored .
& WARNING
• For safety reasons, the seat s etting can only be recalled whe n
the vehi cle i s sta tiona ry
-otherwi se you ri sk h aving an accident .
• In an emergency , the recall operation can be stopped by
pre ssing the
I ON /OF F) button or b y briefly pre ssing an y given
mem ory button . •
Activating remote control key memory
To be able to recall the stored settings with the remo te
con trol key, the function has to be activated in
MM/ .
-Selec t Systems in the CAR menu .
-Select Seat adjustment .
-Select Driver's seat.
Controls a nd eq uip­
ment
Fig . 9 5 MMI disp lay :
Drive rs' seat
Seats and storage
Sel ect Remote control key on to activate the rem ote
contro l key
mem ory ~ fig. 95 .
Passenger's seat memory
Using the memory but tons in the passenger's door, you
ca n sto re an d rec all f our se at sett ings.
Storing and recalling settings
Fi g. 9 6 Pa ssenger's
d oo r: s eat m emo ry
Using the memory buttons 1, 2 , 3 and 4, you can store and recall the
settings for four di fferent
passengers ~ fig. 96 .
Tu rning s eat m emory on and off
If the I ON /OFF ) switch is depressed, the seat memory is inoperative .
The word
OFF next to the I ON /OFF ) swi tch illuminat es.
All the s tored settings are retained. Now the seat can on ly be
adjusted electrically in the normal way. •
Vehicle care I I irechnical data

Seats and storage
Rear seats
General information
Safe transportation of passengers on the rear seats
requires proper safety precautions.
All passengers on the rear seats must be seated in compliance with
the safety guidelines explained
in => page 209 and => page 218. The
correct seating position is critica l for the safety of front and rear
seat passengers
alike => page 202.
& WARNING
• Occupants in the front and rear seats must always be properly
restrained.
• Do not let anyone ride in the vehicle without the head restraints
provided . Head restraints help to reduce injuries.
• Loose items inside the passenger compartment can fly forward
in a crash or sudden maneuver and injure occupants. Always store
articles in the luggage compartment and use the tie-down eyelets.
• Read and heed all WARNINGS
=> page 202, "Proper seating
positions for passengers in rear seats".•
Applies to vehi cles : wi th rea r lumb ar su pp ort
Rear seat lumbar support
Th e outer rear seats have a lumbar support.
Adjusting curvature
Fig . 97 Rear bench
seat: Controls
- Push the switch shell forward to increase the curvature.
- Push the switch shell to the rear to dec rease the curva-
ture.
Height adjustment
-Push the switch shell up to move the curvature higher.
- Push the switch shell down to move the curvature lower.
The lumb ar support is particularly effective in supporting the
natural curvature of the spine so that the seating position is more
comfortable over long distances.
•

Rear window shelf
You can place li gh t a rticles of cl othing on the re ar
window shelf behind the sea tbac k.
& WARNING
When driv ing , do not leave any hard objects on the rear w indow
s helf or allow your pet to sit on the shelf . They could be come a
hazard for vehicle oc cup ant s i n the event of sudden bra king or a
c rash .
[ i ] Tips
• A vent slot is located between t he shel f and the rear window . Do
not b lock the vent with any items you may place on the rear window
she lf.
• Do not place bulky items on the rear window shelf as they could
res trict or b lock the driver's vision in the rear view mirro r.•
Contro ls a nd eq uip­
ment
Seats and storage
Individual rear seats
Ap plies to ve hic les : with indi vid ual rea r seat s
Controls
The operating logic for the switches corresponds t o the
construction and function of the sea t.
Fig. 98 Co ntro ls fo r
individual rear seats
The switches to adjust the seats correspond to the layout, the
design and the function of the seat. The seats are adjusted by
moving the switches following this log ic .
@ Seat adjustment
© Massage function *
© Head restraint adjustment
@ Lumbar support
& WARNING
• Vehicle s with power individual rear se ats have seating for four .
The long center co nsole between the two rear se ats is not a
s eating po sition. Therefore , a safety belt i s not provided.
• The power adjustment for the individual seats al so works with
the ignition switched off or with the ignition key removed . For this
re as on , children should never be left unattended in the vehicle -
they could be injured!
.,
Vehicle care I I irechnical data

Seats and storage
& WAR N IN G ( continued )
• Exercise caution when adjusting the seats . Unsupervised or
careless seat adjustment can p inch fingers or hands causing
injuries .•
App lies to veh icles: with indiv idual rear seats
Seat adjustment
Seat forward /back G)
Fig . 99 Individual rear
s eat s: Se at adju stmen t
-Push t he swi tch fo rward or bac k=> & .
Seat angle up /down ®
-P u sh the s witch up o r down =>& .
& WARNING
• Vehicles with power individual rear seats have seating for four .
The long center console between the two rear seats is not a seating position . Therefore, a safety belt is not provided .
• The power adjustment for the individual seats also works with
the ignition switched off or with the ignition key removed . For this
reason , children should never be left unattended in the vehicle •
they could be injured !
& WAR N ING (continued )
• Exercise caution when adjusting the seats. Unsupervised or
careless seat adju stment can pinch fingers or hands causing
injuries.
•
Appl ies to vehicles: w ith ind iv idual rear seats with massage function
Massage function
F ig . 100 Individ ual
rear s eats: Massage
function
Pr ess th e swi tch to tu rn on t he massag e functi on.
T he massage function runs for ab out 10 minutes . The pa ssenger's
bac k is massaged by continuous ad justment of the lumbar support.
T he curvature of the lumbar support can also be ad justed during the
Mas sag e to mak e it mo re or less aggr ess ive . T hi s va ries the in tens ity
of the
Massage to the level desired by the occupant.
O nce the mas sage func tion s tops after abou t 10 m inutes, the
l umbar support automatically returns to th e position in which it was
l a st set.
[ i ] Tips
T he mas sage function ca n be interrupted at any time by p re ssi ng
the switc h. T he lum bar support r emains i n its cu rr en t pos it io n.•

Applies to vehi cles : w it h in d iv idual rear seats
Head restraint adjustment
Fig . 101 Individual
rear seats : Head
restraint adjustment
Push the switch forward or back to make the head
restraint angle flatter or more upright.
0 Note
If a child seat is at tached to one of the rear sea ts , this seat mus t no t
be adjusted using the power controls under any circumstances . The
easy entry function for this seat must also be deactivated in the MMI
~ page 100. The child seat as well as the rear seat can be damaged
by the adjustment process. •
Contro ls a nd eq uip­
ment
Seats and storage
A pp lies to veh ic les: w ith ind iv idua l rear seats
Lumbar support
The lumbar support can be adjusted to the natural curva­
ture of the spine.
0
Adjusting curvature
Fig. 102 Individual
rear seats : Lumbar
support
Push the switch shell forward to increase the curvature.
Push the switch shell to the rear to decrease the curva ­
ture.
Height adjustment
Push the switch shell up to move the curvature higher.
Push the switch shell down to move the curvature lower.
The lumbar support is particularly effective in supporting the
natural curva ture of the spine so that the seating posi tion is more
comfortable over long distances. •
Vehicle care
I I irechnical data

___ S_ e
_ a_t_s _ a_n_ d
__ s _t _o _r _a ...::g:::.... e ________________________________________________ _
Applies to ve hicles : wi th indi vid ual r ear se ats
Settings in the MMI
The easy entry function can be turned on and off in the
MM/ .
) ' '' ' ' I
Seat adjustment
'
• Drive r·s seat ...
I I

12 :QQ AM F ig . 103 MMI Display:
Sea t ad justment
-Press the I CAR I fun ction button .
-Select Systems in the CAR menu.
Select
Seat adjustment . Th e Seat adju stment menu
appears =:> fig. 103.
Select
Left rear seat or Right r ear seat .
-Select Eas y entry on to turn on t he easy e ntry function for
the corresponding seat or
off to turn off t he f unction for
this seat.
Easy entry makes it more convenient to enter and leave the rear of
the vehicle. When th e function is turned on, the seat automatically
moves to the rearmost position when the corresponding door is
opened. •
Luggage compartment
Tie-down eyelets
The luggage c ompartment is equipped with four tie -down
eyelets to secure luggage and other items.
F ig . 104 Lu ggage
co mp artm ent tie- dow n
eye le ts
-Use the tie-dow n eyelets to secure yo ur cargo properly
=:> fig . 104 -arrows- .
-Read and heed all WARNINGS =:> page 205, "Stowing
luggage" .
In a collision , the laws of physics mean that even smaller items that
are loose in the vehicle will turn into heavy missiles that can cause
serious injury. Items in the vehicle pick up kinetic energy which
varies with the vehic le and the weight of the item . Vehicle speed is
the most significant factor.
For example , in a frontal collision at a speed of 30 mph (48 km /h) ,
the forces acting on a 10-lb (4 .5 kg) object are about
20 times the
normal weight of the i tem . This means that the weight of the item
would suddenly be the equivalent of about 200 lbs (90 kg). One can
easily imagine the injuries that an i tem of tha t weight flying free ly _,,,

__________________________________________________ S_ e_ a_t _s _ a_n _ d_ s_ t
_ o_ r_a ""'g :c.. e _ ___._
through the passenger compartment can cause in a collision at a
speed considered relatively low.
& WARNING
Weak, damaged or improper straps used to secure items to tie­
downs can fail during hard braking or in a collision and cause
serious personal injury.
• Always use suitable retaining straps and properly secure items
to the tie-downs in the luggage compartment to help prevent
items from shifting or flying forward.
• Never attach a child seat tether strap to a tie-down. •
Elastic cargo net
The cargo net prevents light objects from sliding around
in the luggage compartment.
Contro ls a nd eq uip­
ment
Fig . 105 Luggage
compartment cargo
net Fig
. 106 Luggage
compartment cargo
net attached to
mounting hooks
Securing objects to the luggage compartment
floor with the net
-Lay out the cargo net in the luggage compartment.
-Engage all four hooks into the fastening eyelets
=> fig. 105.
-Place objects to be secured under the net.
Configuring the net to restrain small objects
-Lay out the cargo net in the luggage compartment.
-Engage all four hooks into the fastening eyelets
=> fig. 105.
-Pull down the mounting hooks @located below the base
of the rear window.
-Connect each loop on the net to the corresponding hook
as
illustrated==> fig. 106.
-Place items inside the net.
Mounting hooks
There are two mounting hooks under the base of the rear window
inside the luggage compartment. You can attach the cargo net as
well as
light objects to these hooks. .._
Vehicle care I I irechnical data

___ S_ e_ a_t _s _a_ n_d _ s_t _o _r_ a...; g::::.... e ______________________________________________ _
The mounting hooks are spring-loaded and will return to their
normal position when not in use.
& WARNING
For strength-related reasons, the mounting hooks can only be
used to secure objects weighing up to 10 lb .
15 kgl. Heavier objects
will not be adequately secured -there is a risk of injury. •
Applies to ve hicles : w ith ski sack
Ski sack
Use the ski sack to transport and protect skis and other
long, light items in the passenger compartment.
0 •------0
Fig . 107 Luggage
compartment ski sack
hatch
Fig . 108 Ski sack:
securing
Load the ski sack from the luggage compartment.
Loading
- Open the luggage compartment lid and clear a space in
the center.
- Press the release button for the ski sack hatch in the
luggage compartment and pull down the hatch
~ fig. 107.
- Fold out center armrest in the rear seat backrest.
- Press the release button on the lid from inside the vehicle, and then lower the lid.
- Pull out and unfold the ski sack.
- Load skis or similar objects through the luggage
compartment into the interior of the
vehicle=}& .
Securing
-Insert the ski sack strap@=} fig. 108 in the center buckle
®·
- Pull the safety belt taut on the free end of the belt@.
Securing in vehicles with power individual rear
seats*
Loop the ski sack safety belt around the center arm rest.
- Pull the safety belt taut on the free end of the belt.
Stowing
-In the luggage compartment, close the ski sack hatch.
- Fold the ski sack carefully and stow away.
- Close and engage the inner hatch.