-
Advanced Parking System
--~-------------
The image in the visual display can be switched off on the MMI
display=> page 182. The acoustic distance warning remains active.
If you press a function button on the MMI terminal, the visual
display disappears. Manually switching the parking assist on again
via the
P, Yi switch shows the visual image on the MMI display again .
Further informat ion regard ing the MMI terminal is included in the
MMI user 's manual.
Rear-view camera (rear view)
The rear-view camera picture=> page 175, fig. 198 appears on the
MMI display as a mirror image. The rear -view camera picture has
orientation lines and marked surfaces projected into it as an aid to
the parking
process => page 173. The red line in the picture
=> page 173, fig. 194 or=> page 173, fig. 195 indicates the collision
area . You should stop backing up, preferably before you reach this
point =>& .
If your vehicle is close to an obstacle, the visual distance display
also appears in the picture from the rear -view camera. This superim
posed display is intended to help display the relevant critical vehicle
area.
If the visual display is shown on the MMI display and you press the
control button with the
Rear view function=> page 170, fig. 193, the
picture from the rear -view camera is displayed.
If the picture from the rear-view camera is shown and you press the
control button with the
Graphic function => page 175, fig. 198, the
visual display is shown.
The picture from the rear-view camera can be switched off on the MMI
display => page 182. The acoustic distance warning remains
active.
If you press a function button on the MMI terminal, the rear -view
camera picture disappears. The rear-view camera picture reappears
the next time you park. But the picture from the rear -view camera
can also be shown again on the MMI display by manually switching
off and on with the
P' Yi switch . Further information regarding th e
MMI terminal is included in the MMI user 's manual.
& WARNING
• Sensors have dead spaces in which objects cannot be
detected. Be especially careful to check for small children and
animals before backing up . Small children and animals will not
always be detected by the sensors.
• The Audi parking system is not a substitute for being careful
and alert when backing up. Be especially careful during parking
and similar maneuvers . Always watch where you are driving and
make sure that nothing is in the way.
• Remember that low obstacles which have already been
signaled may pass below the system's sensing zone when the
vehicle is backing up. The fact that the signal stops does not mean
that you have cleared the obstacle. When the signal stops, impact
is imminent. Objects such as trailer hitches, chains, narrow posts
or fences covered by a thin layer of paint may not always be
detected by the system. They can still damage your vehicle
without warning.
• Always make sure that the volume and frequency of the chimes
is adjusted so that you can easily hear the acoustic distance signal
even if the radio is playing, the air-conditioner blower is on High or
there is a high level of outside noise.
- Check the settings whenever someone else has driven the
vehicle before you.
• Improper reliance on the Audi parking system can cause colli
sions and serious personal injury.
- Never rely only on parking assist when backing up.
- Always check rear view mirrors to make sure it is safe to back
up.
[ i] Tips
• The rear-view camera picture is available as soon as the MMI
Display or the MMI is switched on, or the start -up phase is
completed .
___ A_ d
_ v_a_ n_ c_e _d_ P_ a_ r_
k _in _ g
=- S
__,_ y_s_ t_ e_ m ___________________________________________ _
& WARNING
Always make sure that the volume and frequency of the chimes is
adjusted so that you can easily hear the acoustic distance signal
even if the radio is playing, the air-conditioner blower is on High or
there is a high level of outside noise. Check the settings whenever
someone else has driven the vehicle before you. •
Applies to veh icles: with Advanced Parkin g Sys tem with rear vie w camera
Switching the visual display /rear-view
camera on and off
The visual display and rear-view camera are preset in the
MM/.
I
Audi parking system
Display APS
Graph ic
Rear view
Automatic
12 :QQAM
'
I
'' I,,' Fig . 208 MMI display :
Display APS -submenu
Fig . 209 MMI display:
visual display of distance to a detected
obstacle
-Pressthe(CARlfunction button.
- Select Systems in the
CAR menu.
-Select Audi parking system .
-Select Display APS ~ fig. 208.
Select Graphic, Rear View, automatic or off.
The rear-view camera and the visual display can be used separately
or in combination for parking.
When you switch manually to the rear -view camera via the control
button with the
Rear View function ~ fig. 209, the control button
with the
Graphic function ~ page 177, fig. 201 appears. You can
switch back and forth between the rear-view camera and visual
parking assist at any time via the displayed control button function.
The presettings in the MMI are retained .
"Graphic" setting
If you have set the Graphic function, the visual display will be
displayed in the MMI display by default upon activation of the
parking assist system
~ fig . 209.
"Rear View" setting
If you have set the Rear View function, the picture from the rear
view
camera ~ page 175, fig. 199 will be displayed when driving
backward and forward whenever the parking assist system is acti
vated.
"Automatic" setting
If you have set the automatic function, the picture from the rear
view camera will automatically be displayed when reverse gear is engaged and the visual display will be displayed on the MMI display
when you drive forward. _,,,