2006 LAND ROVER FRELANDER 2 transmission

Publi s hed: 11-May-2011
Manual Transmission/Transaxle - Transmission
Removal
Special T ool(s)
205-754ASpli tt er, Ball Joint s
211-316Separat or, Ball Joi nt
General Equipment
Powert rai n Jack
Remove t he bat t ery t ray.
Refer t o: Bat t ery Tray (414-01 Bat tery, Mount ing and Cables ,Removal and Ins tall ati on).
1.
2. W ARNING: Make sure t o s upport the vehicle wit h axles tands .
Rais e and s upport t he vehi cl e.
2.
Siphon t he fl uid from t he power s t eering res ervoi r.3.
4. W ARNING: Make sure t hat a new s teeri ngcolumn flexibl e coupl ing bolt i s ins t al led.
Di sconnect t he lower s teeri ng column from t he st eeri nggear.
4.
Remove t he gear s elector as s embl y.
Refer t o: Gears hi ft Li nkage (308-06 Manual Trans mi s si on/Trans axl eExternal Controls , Removal and Inst all at ion).
5.

Publi s hed: 11-May-2011
Manual Transmission/Transaxle - Transmission
Removal
Special T ool(s) 205-754A
Spli tt er, Ball Joint s 211-316
Separat or, Ball Joi nt
General Equipment Powert rai n Jack
Remove t he bat t ery t ray.
Refer t o: Bat t ery Tray (414-01 Bat tery, Mount ing and Cables ,
Removal and Ins tall ati on).
1.
2. W ARNING: Make sure t o s upport the vehicle wit h axle
s tands .
Rais e and s upport t he vehi cl e.
2.
Siphon t he fl uid from t he power s t eering res ervoi r.
3. 4. W ARNING: Make sure t hat a new s teeri ng
column flexibl e coupl ing bolt i s ins t al led.
Di sconnect t he lower s teeri ng column from t he st eeri ng
gear.
4.
Remove t he gear s elector as s embl y.
Refer t o: Gears hi ft Li nkage (308-06 Manual Trans mi s si on/Trans axl e
External Controls , Removal and Inst all at ion).
5.

Publi s hed: 11-May-2011
Manual Transmission/Transaxle - Transmission
Installation Ins t al l the cl ut ch s lave cylinder.
T orque: 11 Nm 1.
Inst all t he transmis si on as sembl y.
T orque: 65 Nm 2.
Inst all t he transmis si on mounti ng bracket .
T orque: M12 80 Nm M8
24 Nm 3.

Publi s hed: 11-May-2011
Manual Transmission/Transaxle External Controls -
Torque SpecificationsDescriptionNmlb-ft
Gears hift lever bol ts107
Gears hift mechani sm bracket bol ts2418

Publi s hed: 11-May-2011
Manual Transmission/Transaxle External Controls - External Controls
Des cript ion and Operat ion
COMPONENT LOCATION
ItemPart NumberDescription
1-Shi ft cables2-Gear knob
3-Sel ect or lever as s embly
4-Sel ect or lever mount ing pl at e
INTRODUCTION
The manual t rans mi ss i on ext ernal cont rols compris e a sel ect or lever as s embly and 2 shi ft cables . The sel ect or al lows t hedri ver t o engage the 6 forward gears and revers e gear.
The s elect or lever ass embly is l ocat ed in a cent ral posi ti on on t he t ransmis s ion t unnel , bet ween the front driver andpass enger s eats and is s ecured t o t he transmis si on t unnel wit h 4 bol ts . The s elector lever ass embly is a non-s erviceabl emechani cal as sembl y.
Selecti ons made usi ng the sel ect or lever are pass ed t o t he t rans mis s ion l ever arm by t he s hift cables . Ball pins on thes elect or lever provide for the at tachment of t he s hift cabl es .
The s elect or has a vehicle s peed dependent sol enoi d int erl ock device. Thi s ensures that t he dri ver i s prevent ed fromacci dent al ly sel ect ing reverse gear.
Selector Lever and Shift Cables

Publi s hed: 11-May-2011
Manual Transmission/Transaxle External Controls - External Controls
Diagnosi s and Tes ti ng
Principles of Operation
For addit ional informat ion.
REFER to: Manual Transaxle and Clutch (308-00 Manual Transmis si on/Trans axl e and Cl ut ch - General Informat ion,
Diagnosi s and Tes ti ng).

Publi s hed: 11-May-2011
Manual Transmission/Transaxle External Controls - Gearshift Linkage
Removal and Inst all ati on
Removal
Remove t he cover and dis connect the bat tery ground cabl e.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -
General Informat ion, Specificati ons).
1.
Remove t he air cleaner as s embly.
Refer t o: Air Cleaner (303-12B Intake Ai r Dis tribut ion and Fil tering -
TD4 2.2L Dies el, Removal and Inst all ati on).
2.
Remove t he bat t ery t ray.
Refer t o: Bat t ery Tray (414-01 Bat tery, Mount ing and Cables ,
Removal and Ins tall ati on).
3. 4.
T orque:
24 Nm 5.

Publi s hed: 11-May-2011
Manual Transmission/Transaxle External Controls - Gearshift Lever
Removal and Inst all ati on
Removal
Remove t he fl oor consol e.
Refer t o: Fl oor Cons ole (501-12 Inst rument Panel and Cons ole,Removal and Ins tall ati on).
1.
2. NOTE: Neut ral mus t be s elected before t he cablesare rel eas ed t o all ow t he cabl es to be correctl y s et ont he ins tal l.
2.
3.